Question about Teac USB2 TV TUNER (USB2TVTUNER) Video Capture

1 Answer

Cannot access my internet explorer browser or AOL using DSL

DSL router is working, but isn't being recognized on my HP pavilion Entertainment PC laptop, I think i might have accidentally deleted it, or installed a driver or adapter over my 2wire gateway wireless modem...i've been through so many troubleshooting processes through my ISP and HP tech support, they cannot figure out this problem... I've done everything, I can only connect with Dial-up at the moment. Sometimes when i sign onto dialup, the webpages can't be displayed or they are automatically cancelled, then if i sign off and wait a few minutes, or hours, and sign back on to dialup, they work again?? I do not have a virus/spyware, on my computer, i've done many scans, and i've also had problems with windows updates not completely installing? Please help!? I am running windows vista home edition, internet explorer 7 but keeps prompting me to update to 8 which i did, and it made it worse, so i uninstalled IE8, windows firewall with windows defender.
thank you,
Lee

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 157 Answers

Looks like you may have a few different problems. Right now you cannot get your wireless laptop to see your router, correct? If this is a newer laptop for you, then the problem may be too simple. On the new hp laptops above the keyboard are light indicators for sound, volume and wireless connections. They are also buttons. The wireless one is on the right of the volume control. You turn your wireless on and off by pressing on the light. It should turn from a yellow/orange to a deep blue. Blue is on, yellow/orange is off.

Leave feedback if this was the problem. Otherwise leave more information just about the wireless setup.

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP a6200n won't connect to the internet. it says it's connected to and unidentified network. It is a DSL hookup and I also have a wireless router hooked to it the router is pumping out signal which is...


directly connect the dsl modem to your pc and then restart your system. once your up and running the pc should automatically create a connection with the modem device. once you have established an internet connewction this way, shut down the system and reboot. after complete bootup, unplug the power supply cords to both the modem and the router. now plug im the modem, wait 1 minute and plug in the router. after about a minute you should now be able to connect to the internet both by your pc and wireless connections.

Jan 17, 2011 | HP Hewlett Packard Pavilion A6200N PC...

1 Answer

No internet access with wireless


Hi,

First of all check the DSL cable must be in WAN port of the linksys router. if it is done then do the following.

Actually DSL modem and Linksys router are conflicting with their IP class. Means DSL and Linksys routers are using the same IP class of 192.168.1.1 or 192.168.0.1.

You must change one's IP class because both are routers and if they having same class they cant communicate. Unplug the WAN cable of the linksys. open browser and put ip 192.168.1.1 or 192.168.0.1 any one which works for u in the address bar. Username and password hopefully be admin admin or just admin and password blank field.
when you access the linksys router configuration page then come to LAN configuration. If there IP is 192.168.1.1 then change it to 192.168.0.1 and if it is 192.168.0.1 then change it to 192.168.1.1 Save configuration and reboot your laptop and plug dsl cable to linksys WAN port.
Hope now this will work.


Regards;
Hasan

Dec 30, 2009 | HP Pavilion dv6000z Notebook

2 Answers

I am trying to configure my netgear router to work with my dsl motorola modem


You can access your wireless router by first running you ethernet cable from pc to wireless, then in address bar, type 192.168.1.1 and this will enter the wireless router's software. If it asks for username and password, try typing admin for both.

Sep 03, 2009 | NetGear WGR614 Wireless Router

1 Answer

ATT Yahoo Internet Installer does not recognize the DSL modem


If you can, pls post the exact errror message that you receive and which specific application are you trying to install?

Jan 12, 2009 | 2wire HomePortal 1000HW DSL Modem and...

2 Answers

AOL broadband connection


The answer is very simple ... Uninstall the AOL browser, you do not need it to connect to the internet, AOL's browser, as I have discovered chokes your bandwidth and slows down your PC. I would strongly recommend using something like Firefox (you can add the AOL toolbar if needed). I removed AOL's browser over a year ago and have not had a single problem, bespite the fact that AOL insist I must have it installed on my PC ... Absolute rubbish.

Aug 17, 2008 | Dell Dimension 3000 PC Desktop

1 Answer

Netscaping


Yes, Netscape 6.2 will work properly with the web page-based interface used in D-Link DSL routers, however, due to problems the browser has loading Java applets and working with Java scripts all of the features may not be visible. Netscape 4.7 does work with the interface, but is extremely slow in loading the various configuration pages. For these reasons, it is recommended to use Microsoft Internet Explorer 5.x or 6.0 to configure D-Link DSL routers. Internet Explorer loads the pages faster and Java applets work properly, as shown below. Note the tree in Fig. 1 (using Internet Explorer), representing the router´s various configuration pages and in Fig. 2, the PPP Connection information. Using Netscape 6.2 as shown in Fig. 3, the configuration tree is missing and in Fig. 4 the PPP Connection Information is not displayed.

Feb 16, 2006 | D-Link DSL 500 (DSL-500) Router

1 Answer

AOL DSL Plus


AOL DSL+ now uses PPPoE for authentication bypassing the client software. To set up your router: Step 1 Log into the web-based configuration of your router by opening a web browser such as Internet Explorer or Netscape and enter the IP address of the router (192.168.0.1). Enter admin for username and then your password (blank by default). Configure the WAN side to use PPPoE. Please consult your manual for login instructions since all routers are not the same. Step 2 Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box. Step 3 You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400. Step 4 Apply settings. Step 5 Unplug (turn off) the power to the modem and router. Wait 1 minute and then power on only the modem. Wait about 1 minute and then power on the router. NOTE: If you connect to the Internet with a different Internet service provider and want to use the AOL software, you can do that without configuring the router?s firewall settings. You need to configure the AOL software to connect using TCP/IP (LAN). Contact AOL for more specific configuration information of their software.

Feb 16, 2006 | D-Link DI-707P Router (DSDLDI707P)

1 Answer

AOL DSL Plus


AOL DSL+ now uses PPPoE for authentication bypassing the client software. To set up your router: Step 1 Log into the web-based configuration of your router by opening a web browser such as Internet Explorer or Netscape and enter the IP address of the router (192.168.0.1). Enter admin for username and then your password (blank by default). Configure the WAN side to use PPPoE. Please consult your manual for login instructions since all routers are not the same. Step 2 Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box. Step 3 You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400. Step 4 Apply settings. Step 5 Unplug (turn off) the power to the modem and router. Wait 1 minute and then power on only the modem. Wait about 1 minute and then power on the router. NOTE: If you connect to the Internet with a different Internet service provider and want to use the AOL software, you can do that without configuring the router?s firewall settings. You need to configure the AOL software to connect using TCP/IP (LAN). Contact AOL for more specific configuration information of their software.

Feb 16, 2006 | D-Link DI 707P (DI-707P) Router

1 Answer

Internet connection provided by AOL DSL Plus


AOL DSL+ now uses PPPoE for authentication bypassing the client software. To set up your router: Step 1 Log into the web-based configuration of your router by opening a web browser such as Internet Explorer or Netscape and enter the IP address of the router (192.168.0.1). Enter admin for username and then your password (blank by default). Configure the WAN side to use PPPoE. Please consult your manual for login instructions since all routers are not the same. Step 2 Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box. Step 3 You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400. Step 4 Apply settings. Step 5 Unplug (turn off) the power to the modem and router. Wait 1 minute and then power on only the modem. Wait about 1 minute and then power on the router. NOTE: If you connect to the Internet with a different Internet service provider and want to use the AOL software, you can do that without configuring the router?s firewall settings. You need to configure the AOL software to connect using TCP/IP (LAN). Contact AOL for more specific configuration information of their software.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
Teac USB2 TV TUNER (USB2TVTUNER) Video Capture Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Televison & Video Experts

bengsoon Neo

Level 2 Expert

63 Answers

JOHN TOPLISS

Level 2 Expert

151 Answers

Cindy Wells

Level 3 Expert

5099 Answers

Are you a Teac Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...