I have tried to connect to 2 different XP computers via the USB charger/connection station and the PC does not recognize the Device.
I have tried the suggestions on the TomTom website to no avail.It was also indicated that drivers were available on the supplied CD which I could not find.
I would be grateful for any suggestions or answers to the problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You likely need to directly connect. In most cases the FM transmitter is too week to broadcast through FM stations, and a direct connection will clear up your issue. It could be as simple as connecting via an Auxiliary cable or Cassette Adapter. If you don't have the ability to use one of those, you can get an Auxiliary Input Adapter. Another solution would be an external FM Transmitter, with a larger range.
Car cradle works "wirelessly" with Car Radio (inherent design of unit). Place Unit in Cradle; connect Cradle to Auto Power Source, and SkyFi3 should power on. Press Menu to Get FM Radio station channels; select a lower station Channel Frequency i.e. 88.3 or any vacant channel number and the signal should transfer to your Radio speakers automatically. You can change Station frequencies as often as you need to do so--for example if traveling through different broadcast areas, some channels frequencies are clearer than others.
You have to download the recovery software from Sirius. Then you have to hold down the options and display buttons while turning it on. This should initiate the recovery process. This is all outlined in the manual with the recovery software. Having said that I wouldn't bother. These things are junk. I'm on my 8th one from warranty.
exact same problem here. the fuse inside is blown, according to sirius tech support.
I have a new one "on order" as a warranty replacement. They said it could take up to a month (in canada)
i read many bad reviews about this unit... now I agree with them completely. 3 months of light home use before a fuse blows? Pathetic.
A month wait for a new one? Unforgivable.
I had a sync problem with the Stiletto 2 (SL2) and was able to resolve it by the following procedure:
Click "Start" Click "Run" > Type "devmgmt.msc" Click "+" next to "Other Devices" Note: You should see a question mark and exclamation point next to "Stiletto 2" Right click on "Stilleto 2" (to see menu); then, left Click "Update Driver." Follow the steps in the windows hardware update wizard.
Mount your Roady 2 in your Truck .Make sure the power is on & the antenna is connected. The middle connection should be open. Push the menu button, you should see FM Frequency at the top.Push the scroll button(Top Right) and you should see FM station numbers. Scroll though the stations and pick a frequency that isnt being used in your area. Push the scroll button in to set the station. The display will show that number set 88.3 set for example. Set the FM Tuner in your truck to the same station. You should be go to go. Good Luck
Try playing the Roady 2 through a fm radio with the audio jack(middle connection) disconnected and the FM Frequency & Fm Radio set to the same station. At least this will tell if the receiver is working. I suspect that you got an aftermarket audiojack for your stereo. Might want to check that. Go back to the manual FM Modulation setup instructions. Any FM receiver will work. Good Luck
You have to use My Sirius Studio as the interface to your S50 to add/remove MP3 songs. Depending on your Windows version (hopefully 2000 or later) you should be able to connect via USB and Windows will autodetect the device.
My Sirius Studio is a poor man's iTunes where you have to add music files before you can drag them to the playlists you created on your S50.
You can download the software from the Sirius web site, including the latest update.
Keep in mind you have to disconnect the S50 from My Sirius Studio. You can't copy files to it and then unplug the USB cable.