Question about HP Color LaserJet 2600n Printer

2 Answers

Hp 2600n color printing problem

Recently i found that the hp 2600n printer is giving shades of colors while printing(ie..the for brwn cyan and majenta are printing with 1 mm difference) after calibration of color ..the problem is not getting solved..
Can anyone help me in this regards?

Regards
Rajesh

Posted by on

  • 6 more comments 
  • Anonymous Feb 22, 2008

    i hav same problem ,even i am using origanal toners. no solution found .

    please help

    Ravi Natekar

    Ravi@shreeelectronics.com

  • suzan716 Mar 19, 2008

    For no reason at all the Magenta stopped printing and it was not empty. Tried two new HP magenta units and still no magenta printing. Until now, it has been printing beautifully for months. Does anyone have a clue?

  • Anonymous Mar 29, 2008

    recently i found that the hp 2600n printer is giving shades of colors while printing(ie..the for brwn cyan and majenta are printing with 1 mm difference) after calibration of color ..the problem is not getting solved..
    Can anyone help me in this regards?

    Regards
    MUNESH JADAV

  • jeff_299 Apr 03, 2008

    I'm having the same problem too. It was working fine, and then all of the sudden, POOF! it started printing ghost images. If I click on the "Restore Factory Defaults" it seems to help for a day or two, and then it gets worse again.

  • Anonymous Apr 03, 2008

    Colour patches are coming thorough out thre page, while printing a document.

  • Anonymous Feb 04, 2009

    I have the same problem and is the original cartridge i would like to know anyway to fix it i think maybe is dirty or has something stuck i really would apprecciate any help

    judda22@yahoo.com.mx


  • Anonymous Feb 07, 2009

    hlkjhlk

  • Anonymous Mar 17, 2014

    error 512 code solve

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I was on the brink of dumping my 2600n before I got it right. Somehow dirt on mostly only two colors make them print out of alignment. I had to remove the laser "windows" to clean them so that laser can align properly again. Big and scary job!! There is a walkthrough somewhere though.

Posted on Jun 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Are you using orgnial hp cartridge if not check that it may cause due to that. check the black sheet fro color spreading , if there is any color pls clean that.........

Thank you

Posted on Feb 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp 2600n line


after you have printed a few pages switch the machine off just as the paper leaves the fuser. then open the front cover and take a close look at the image transfer belt ( black plastic conveyor type belt)
use a torch shone accross the belt to better light the error- if you can see these Green/yellow/cyan lines on the belt then theres a good chance its coming from the toner units- ( also try print quality troubleshooting pages in the menus under diagnostics.look at the individual colour pages and look for any lines or Uneveness about the shaded colour) replace whichever toner is not printing correctly

Jan 22, 2014 | HP Color LaserJet 2600n Printer

1 Answer

I'm printing Microsoft Word 2008 for mac files to an HP2600n printer and the tables with shading that has any blue in it comes out black. Why? Why?


It's possible that the Cyan toner is low or depleted. If so, the printer will print the blue areas in black. This is a possible way to check:

1. Open your Applications folder and double click on "System Preferences."
2. When it opens, click on the printer icon with "Print & Scan" underneath it.
3. Click on the HP2600 printer on the left, then click "Options & Supplies"
4. Click on "Supply Levels." Check the Cyan toner cartridge. If it's low, then you'll have to buy and install a new one.

Here is a link to the HP cartridge page.

You'll have to consult the information that came with the printer on how to replace the cartridge.

Aug 14, 2012 | HP Color LaserJet 2600n Printer

1 Answer

I have hp color laser jet 2600n printer.. but after printing, there have line at the both side left and right on my paper.. the line is about 1cm .. how do i fix the problem.. tq..


If the lines are predominatly one color such as yellow or cyan then you likely have a bad cartridge. If you recently replaced a cartridge that is the one I would check first. You can also just look at the drum of each cartridge (the green roller under the shutter). If there is a problem it will usually show on the drum as well. Cartridges are the biggest issue with these printers, particularily the poor quality of cheap remanufactured cartridges coming from Asia.

Mar 16, 2011 | HP Color LaserJet 2600n Printer

1 Answer

Feint majenta printing


Hi

Just take off the toner cartridge and shake it well to distribute evenly and then return it back to the printer and then print again.

Jan 14, 2011 | HP Color LaserJet 2600n Printer

1 Answer

When i print toner status black color is faded as well as yellow and cyan, magenta showing white color, can you please give the best solution for this. by the way i am using hp 2600n. thank you very much.


First, make sure that the toner cartridges have enough toner. The toners may be exhausted. In case the toners are ok, the printer requires servicing/ cleaning of lenses and mirrors inside the printer.
Please refer here to my earlier solution to this problem, which was very helpful for the users of Color LaserJet 2600n Printer.


GoodLuck!
Dont forget to appreciate the solutions if I could have been of any help!
CreativeTECH

Dec 08, 2010 | HP Color LaserJet 2600n Printer

1 Answer

Our HP Color LaserJet printer has a 10.10000 error


10.000x Supply error E-label cannot be read or print cartridge is
not properly installed.

10.0001 = Cyan print cartridge

try this:
1 Reinstall print cartridge.
2 Turn on the printer.
3 If the problem is not solved, replace the cartridge.

Nov 03, 2010 | HP Color LaserJet 2600n Printer

2 Answers

My HP LaserJet 2605dn is printing pictures with a bluish tone


Check the Colour management in printer driver on the computer - set this to Automatic.
On the printer or The HP ToolboxFX, check to see if Economode is turned on (under Print Quality) which reduces the print quality.

Dec 15, 2008 | HP Color LaserJet 2600n Printer

1 Answer

2600n prints greenish little reds


i have priner hp laser jet 2600n but it is printing very low any pic if i print it is come very low color i changed toner cart but still same problem.

Sep 03, 2008 | HP Color LaserJet 2600n Printer

1 Answer

My Hp LaserJet 2600n stop black stop printig


the problem is cyan and yellow toner are low, u will change the cyan and yellow it will be cleared otherwise the will be empty u can't print any thing suppose one will empty other cartridge will not work

Aug 26, 2008 | HP Color LaserJet 2600n Printer

1 Answer

Re: printing


hi i have 2600n hp laser printer , I have changed Majenta Catrige with new one, but we have not get output for majenta color,

Nov 23, 2007 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

1,058 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98694 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...