Question about Maytag Neptune MAH5500B Front Load Washer

1 Answer

Noisy during spin cycle, sounds like a jet plane at full spin.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

The drum bearings have gone, expensive repair, this is caused by over loading the machine

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

SOUNDS LIKE JET PLANE WHEN IT GETS BY RINSE AN SPIN TIME


I assume you mean it sounds like a jet plane when it spins, if so, I suspect a bad tub bearing. Depending on age of the machine, probably too expensive to repair.

Mar 07, 2015 | Maytag Neptune Washing Machines

2 Answers

Need to know what the error codes mean on a whirlpool cabrio model wtw6400sw3 F54,F82,F83,F84. Please help.


you may have something between the tubs or your bearing is going bad . does it sound like a jet plane in spin cycle?

Feb 20, 2013 | Whirlpool Washing Machines

1 Answer

Loud noise during spin cycle now they are stacked


a loud noise comes when you forget to remove shipping bolts after installation or if the shocks are worn out it makes noise thirdly the bearings might be worn out if the washer is more than 6years old

Jan 21, 2013 | LG Cherry Red Steamwasher Wm2487h Front...

1 Answer

Jet Plane noise in spin cycle


The bearing in the outer tub assembly is going out and you will need to replace it. Here is the part if you want to order it but you might want to look into buying another machine.

Nov 20, 2012 | Washing Machines

1 Answer

Washing machine sounds like a jet plane, when spinning


I would suspect that the main drum bearings have failed.
From the front of the washer, spin the drum by hand, and if it feels rough or is noisy, then the bearings have failed.
There should be little or no noise when you spin the drum.

Jan 31, 2011 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Model FWT449GFS1 Frigidaire Gallery problems: roaring during spin cycle, worsening drum won't turn manually and this last run, was making sounds like slipping belt. During drain time, can hear coin in...


most likely transmission bearings are worn out (sounds like a jet plane taking off) unfortunately this requires replacing the transmission which is a costly job.

Sep 07, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

No spin & drum is very noisy during cycle ,like a jet engine


Sounds like the drum bearings have gone and the belts come off.
Im afraid this is an expensive repair and not a diy job.
Sorry to be the bearer of bad news.
thankyou for using Fixya.

Mar 15, 2009 | Washing Machines

1 Answer

Very Noisy Washer!


Hello julierealtor how old is the washer? Try turning the inner drum by hand and see if it is noisey or moves up and down. If so then it is either your rear support of the inner drum that has failed or the rear bearings. If it seems fine, maybe you have something in the drain pump (which runs prior to and during the spin) that is causing the noise. If it is noisy during the drain, then you may either need to clean out the pump or replace it. Hope this helps.

Aug 10, 2008 | Frigidaire GLEH1642DS Front Load Stacked...

1 Answer

Danby washing machine noisy only during spin cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 13, 2008 | Danby DWM99W Top Load Washer

Not finding what you are looking for?
Maytag Neptune MAH5500B Front Load Washer Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...