Question about D-Link AirPlus G DWL-G710 Wireless Range Extender

2 Answers

When i type in http://192.168.0.30 it dose nothing

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

OK, u need to hot reset it. push the pin in for 15seconds while the device plugged in. then connect via a cable and put in static settings.
ip: 192.168.0.50 subnet: 255.255.255.0 gate way: 192.168.0.1
should work.

Posted on Feb 05, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

You might just have the wrong IP for it, instead of resetting the device and hoping your information is right, just pull up your routers DHCP settings page and see what IP your router has assigned to it.

Posted on Feb 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My washer is not working it has power but it wont wash it wont rince it dose nothing


Would love to help you but I need to know if it is displaying any error code?

Feb 18, 2015 | Kenmore HE2 Plus Front Load Washer

1 Answer

My 2003 x type jaguar dose nothing when I turn the key,the battery is good!! I suspect the engine management relay? Am I correct? how do I test it


is it a diesel? if so the starter motor is favorite, if its a petrol could be lots of things, you need to get wiring diagram and check it out. also the anti theft system may have a issue!

Aug 20, 2013 | Jaguar Cars & Trucks

1 Answer

I have a mpc transport x1000. The bios password comes up now at start up. I have tried a few ideas and things that people have told me but nothing works. Is there a specific unlock code or something that...


There is no specific unlock code that you can use to bypass this password but I would suggest that you first try and clear the password and then call the manufacture if that dose not work and they should be able to help you. I have attached a link to a tutorial on how to bypass this type of password.

http://www.technibble.com/how-to-bypass-or-remove-a-bios-password/

I hope this helped.

Thank you,
Norse

Jul 03, 2010 | MPC Computers TransPort X1000 Notebook

1 Answer

What dose wnv stand for in music terms


wmv is a type of file. A .wmv file is a Windows Media Video file.
You can find more information here:
http://en.wikipedia.org/wiki/Windows_Media_Video
I hope this helps :)
Best Regards,
James

Feb 09, 2010 | Car Audio & Video

1 Answer

No power


tried another power cable and plugged the monitor directly to other wall outlets. If that does nothing then go to http://www.viewsonic.com/support/customer-service/ and set up to ge the monitor serviced.

Oct 27, 2009 | ViewSonic VP230mb 23.1" LCD Monitor

1 Answer

My car starts once then wont start again. Its a 92 Subaru. We tested the starter and it tested fine. Could it be the armiture?


What dose it do after starting then you turn it off whet dose it do /how and wheat type of sound dose it make ,,dose it just go clonk and nothing else/or dose it turn over slowly and dont fire Iwant to get all information before stating the problem.
If it tested ok then the starter should be good

Let me know how it sounds Ron

Oct 02, 2009 | 1992 Subaru Legacy

3 Answers

What dose the code p1000 mean and p1645


P1645 EVAP Solenoid Output Circuit
P1000 Scan not complete. meaning it didnt finish scanning

Sep 14, 2009 | 2002 Jaguar X-Type

1 Answer

My wheelchair dose not move


The chair has two levers, one for each motor, that disengage it for freewheeling, or pushing the chair without power. These take it out of gear. Place the levers in the locked, gear-engaged position and it should go for you. Here's a link for the manual for your chair, and it will show you where the location is to place it in gear.http://www.invacare.com/doc_files/1125085J.pdf

Apr 16, 2009 | Invacare Pronto M51 Power Wheelchair

1 Answer

Unknown toner


It must be some compatible toner on toner which are made from other company and not from ricoh on the label dose not write nothing some times.

Aug 28, 2008 | Ricoh Type 1110D - toner cartridge for...

Not finding what you are looking for?
D-Link AirPlus G DWL-G710 Wireless Range Extender Logo

Related Topics:

1,343 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...