Question about Whirlpool Duet GHW9150P Front Load Washer
Please read the Fixya article below explaining how to fix the problems related to control lock on Whirlpool dryers and washers.
The front light lit on my Whirlpool.
Posted on Feb 22, 2010
The Control Lock is a safety feature that enables the consumer to lock the control panel to prevent small children from manipulating the controls and accidentally starting the appliance. It can inadvertently be set following a power outage, by leaning against the control panel, or children playing with the buttons. This is usually not an indication of a washer malfunction.
If this is a Maytag Epic, Whirlpool Duet, or Kenmore Elite, the following link explains how to lock/unlock this feature:
These instructions are also printed on the front panel of the appliance and in the owner's manual. If this does not correct your problem, then you may have a more serious problem than a simple operator control issue. If you need further assistance, please let me know. I hope this corrects the problem for you.
NOTE: If you cannot locate your owner's manual, you can download or print a FREE copy at managemylife.com. Just type in your model number under the "Manuals" link and you will find your manual listed in a .pdf (Adobe) format.
Posted on Feb 04, 2010
Somewhere on the control panel under one of the buttons it will say hold for 3 or 5 seconds to lock or unlock control panel. You may have accidently locked panel while cleaning or some one held button for too long and panel locked. The control lock is there in case you want to prevent small children from turning on your washer. Just hold down button for a few seconds and light should go off.
Posted on Feb 03, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 25, 2011 | Whirlpool GHW9300 Duet Washer
Hello & Welcome to FixYa
This is a common issue with Whirlpool Duet washer however, to resolve this control lock problem your whirlpool duet washer needs a reset. Press and hold the END OF CYCLE/CYCLE SIGNAL button for 15 seconds to reset the control. Please get back to me if you have any other questions.
Apr 12, 2011 | Whirlpool Duet GHW9150P Front Load Washer
Feb 22, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Aug 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer
May 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Dec 20, 2008 | Whirlpool Duet GHW9150P Front Load Washer
125 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: