Question about Audio Players & Recorders

1 Answer

Turner plus 3 desk mic 4 wire.Wired it into a 5 pin plug cobra 2000 glt.Has no dead key on ssb unless you turn the value all the way up.work good on staight am.

Posted by on

  • Andy Beck Feb 02, 2010

    Thank you very much..Im just getting back in Cbs and very interested more in DXing on side band. Im not familary with this corbra 2000 I bought it off of E-Bay alway hear they were the one to have.I had the Mic on a little super clean Royce 23 channel T-28 and it rocked on it,had some get reports up to 15 mile,Wasnt sure I wired the mic right to the 5 pin on the cobra.Thank you again
    Andy
    West Texas 940

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 14,553 Answers

There is no dead key on SSB---the radio when you speak into the microphone modulates the radio to whatever maximum output this radio has been set to on SSB.

Most of these radios--2000,148, etc will on SSB modulate to 12-20 watts depending on how the radio has been tuned.

The +3 microphone should work but is not the Loudest microphone for this radio---on sideband it is all determined by the audio output of the microphone--what happens in some of these very old Turners is the element decays and does not produce enough audio.

If another microphone works better the element in the Turner may be damaged or weak.


Let me know if you have questions--I have own several of the 2000's and many other base station radios including the Browning Golden Eagles.

SD TECH

Posted on Feb 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have cobra ca61 desk mic i need it wired to my cobra 142 gtl home base. the base has 5 pins so i need my mic to be wired for 5 pin... any ideas?


cobra 5 pin to 4 pin adapter on ebay around $5.00
http://www.ebay.com/itm/WORKMAN-C4P5C-CB-RADIO-MICROPHONE-ADAPTER-5-Pin-COBRA-TO-4-Pin-COBRA-/121655850211?hash=item1c5340f4e3:g:e0AAAOxy2YtRsJ8n

Apr 10, 2015 | Cobra Radio Communications

1 Answer

I want to wire my superstar dm452 power echo mic to my realistic trc 465 am ssb and need to know what color goes to what pin?


its a 5 pin which all radshack radios are and they are all,99% anyway, wired the same . So take an old radshak mic apart at the plug and see how it is wired then experiment from there.

Apr 07, 2015 | Workman Publishing Workman DM-452-5 model...

1 Answer

Wire 4 pin Turner Plus 3 Power Mic for cb radio to 5 pin President Washington SSB AM Radio


the best i can find is this
red pin 5 ptt
black pin 4 ptt ground
white pin 1 mic
shield pin 2 mic ground
no connection pic 3

Jan 19, 2015 | Radio Communications

1 Answer

I need wire 4 pin mic to a 5 pin mic cobra 142 Gtl?


you'll have to seperate the ground from the shield and then attach the rx,tx,and ground ,the shild then the ground thats on the shield.

Apr 30, 2014 | Connex Radio Communications

1 Answer

I need to wire a 4 pin to a 5 pin mic turner plus 3 to a cobra 142 GTl


pin#1 audio lead #2 audio shield #3 receive control #4 ground #5 transmit control

Apr 30, 2014 | Cobra Radio Communications

1 Answer

Want to rewire a turner plus 3 mic to a 6 pin deitaforce


they make an adaptor, check ebay. i just got one for my d104 4pin to rci 6 pin. 5bucks free shipping.

Dec 10, 2012 | Magnum DeltaForce CB Radio

1 Answer

I'm trying to wire a galaxy desk mic to a cobra 200 10 meter mobile


  • The Galaxy desk mic (power mic) is already wired four pin and the Cobra 200 is a 4 pin already as well. So unless someone has messed with them the mic will plug right up to the radio as is.

  • But if someone has repined the mic then follow the pinout I listed below to get it rewired for the Cobra 200
  1. Pin #1 on mic connector - Black wire.
  2. Pin #2 on mic connector - White wire.
  3. Pin #3 on the mic connector - Blue wire.
  4. Pin #4 on the mic connector - Red wire.

  • If you look on the end of the mic connector it will have the imprint of the number for each pin on the mic.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Oct 02, 2011 | Cobra Radio Communications

1 Answer

Put another **** on 29 ltd and lost key up and receive but it still lights up. What you thank is wrong. 5 different mics, all work in my other radios. I heard something chatter and it would not tx or rx...


Check to make sure that there is noting shorting out inside of the radio. some mic plugs can turn from overtighting the mic connector.. also check the pins they may be broke or compressed too much and won't make connection to any mic.. Pin 1 is ground and pin 4 is rx.. take a jumper wire across those and see if you get rx back. same for tx pin 3.. jumper pin 1 and 3 should have a key up. pin 2 is your of course audio. these should be first things to check. cobras unidens and galaxys, connex, genlee etc. are wired the same. midlands and radioshacks ge are different. so make sure your mic is wired for a cobra or galaxy also.. any mic will work on any radio. as long as is it wired to it correctly....

Dec 15, 2010 | Radio Communications

1 Answer

Cant transmit


Hello Darren, Yes it sounds like the mic is wired bass ackwards,,! A cobra 25 mic wiring is
PIN #1- Shield or ground wire
PIN#2- Audio or Transmit modulation
PIN #3- Transmit or Dead Key
PIN #4- Receive Audio.
When your keying the mic, the RX wires are being connected to make the RX work,,,
*** Let me know how you get along with it. Either buy a new mic wired for your radio or you or someone comfortable with soldering needs to resolder the correct wires back on the mic plug,,,Like I said, let me know and have a great day,, Mechanic is back quiet!

Oct 21, 2008 | Cobra 25 LTD 40-Channels Base CB Radio

5 Answers

Cb mic wiring


I have a browning golden eagle mark II. It has a two pin mic plug. I would like to hook up a astatic power mic to it. Anyone have an answer?

Oct 07, 2008 | Magnum DeltaForce CB Radio

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5151 Answers

The Knight
The Knight

Level 3 Expert

74377 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...