I have an HP LaserJet 6L. Until a week ago it was printing fine. Then it stopped printing lighter greys and converting light colors to light greys. I thought it was running out of toner so replaced with new cartridge. It still has the same problem. What would cause this?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
go to the HP website, and search for the driver for your model printer. once installed should be able to recognize your printer. Also make sure you dont plug in your usb from the printer to the computer until after u install the driver.
Hello, Your problem could be either due to the malfunctioning of the driver or you may have installed a wrong printer's driver. This can be rectified by reinstalling the printer;s driver. Please find the proper driver in the following link.
Have you installed the printer so Windows can print to it? Support for the HP LaserJet 6L is native to XP, so you don't need any special drivers. Just pick "add printer" from the "printers" control panel icon, select HP from the list of manufacturers, and then pick the LaserJet 6L.
If this solution is what you needed, please take a moment to rate it. If you still need help, please post a followup comment comment before giving a negative rating. Thanks for asking here!
It can be done tested by Thoo personally 6L printer prints well on vista too The printer end should be connected to 25 pin parallel cable, converted to the USB on the notebook end of the wiring To solve your printing problems locate vista driver, since i have tested vista works fine on HP 6L printers make sure you select the correct O/S and assign in to the USB virtual port 05 http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=14974&lang=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=18972&prodSeriesId=25476 After installing my vista can print perfectly well on test printout Advise from http://www.bebo.com/andythoo Technical support specialist: Thoo Wai Kiat
Use any printer parallel 25pin convertor to USB cable and connect it to pc or notebook Connect both ends from pc to 6L printer Go to website to choose the correct O/S driver for installation http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=14974&lang=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=18972&prodSeriesId=25476 Use virtual USB port005 for printer 6L Bi-directional option can be ticked Click apply and ok Unplug and replug the USB cable Try printing a test page,
I have tried it, the vista download drivers works on vista, no problems in printing at all, advise from http://www.bebo.com/andythoo
Laserjet 1022 printe supports printing through the Laserjet 6L drivers and its tested, please select the same USB port for the Laserjet 1022 printer which is selected for the Laserjet 6L printer and then try printing.