Question about Televison & Video

1 Answer

Our TV is only two year old and it keeps saying no signal. It is hooked up to satalite dish. But we have three and the other two works our other tvs, but not this one. What could be wrong?

Posted by on

  • 2 more comments 
  • galer Feb 02, 2010

    It is a polaroid TDX02610B

  • galer Feb 02, 2010

    and we did try hooking it up to ther sources



  • galer Feb 02, 2010

    It is hooked up to HDM1

  • galer Feb 05, 2010

    Hi this did not work any other ideals.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

Thank you for posting your question on Fixya! I will surely help you with your problem, but need a bit more info
1)What is the make and model number of your tv?
2)Through what input is it hooked up(HDMI, component etc.,)?
3)Did you try hooking it up via any other inputs?

Sai.

Posted on Feb 01, 2010

  • eagle338
    eagle338 Feb 02, 2010

    To select the input press the input button on the remote and select HDMI1
    The press Menu-> Select Video-> Select the picture mode-> and keep changing the resolution to see which one matches the resolution set on the box. If the option is not available in Picture mode, then you will find it in the Video menu under VGA(HDMI, S-video, Component etc., will appear under VGA). Note that the cable box will also have the option to adjust picture resolution. If you figure out that the box is set to a low resolution then let me know the make and model of the box and I will help you change it.
    PS: Since you have accepted this thread you may not be able to post further comments on it. So please send your further responses to my e-mail ID vls_powerful2002@yahoo.co.in

    Sai.


  • eagle338
    eagle338 Feb 06, 2010

    Ok.. So we have
    1)Tried different tvs
    2)Different inputs and different resolutions
    I am starting to think that its a problem with the box itself. Don't you think so?




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a Sanyo CE32DFN2-B digital television. Our region has completed the digital switchover today and now we cannot tune the TV into any channels at all. Is this because our TV is too old to cope with...


Ur tv have a big back like hunt back creature?Yes?This tv it is not a Digital tv.It is an old CRT tv-tube analogue design tv.This tv still will work and have a broadcasting incomming signal if it is hook up to a pay services tv like Satalites tv like Direct Tv,Dish Network tv,Timewarner or Cox Cables services and ATT U verise or Verizon Fio digital hook up.If u wanted to watch a switch over FREE OVER THE AIR DIGITAL incomming broadcasting signal for this tv it will not work alone,the tv must have be to hook up to a BOX that call a DIGITAL CONVERTER BOX than this tv will work for a FREE OVER THE AIR DIGITAL broadcasting tv channels stantions.This DIGITAL CONVERTER BOX are no longer on sale on regular Stores.Tries websites like Amazon.com,Ebay.com will able to buy these BOXES so call DIGITAL CONVERTER BOX.

Aug 17, 2011 | Sanyo Televison & Video

1 Answer

The hdmi wont work the av works I have tried all three hdmi plugs on the the tv and it says no signal could you please help everything I have is setup for hdmi


Tries tv and those cables or satalites boxes unplug,replug it back like about an hour later for those pay boxes to reboot and upgraded it softwares.Tv to do a whole resetting itself back to the factory setting.Than go into the tv Menu.Go into Video Setting,go down and do a resetting back to factory setting.By doing this steps for every components devices that hook to the tv HDMI hubs ports on the tv Tuner signal board to reboot and resetting too.Have very good chances all the HDMI hubs ports on the tv to work again.

Jun 26, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

My Sony Bravia (new) is giving me problems when hooked up to my Onykyo receiver (1 yr old). Doesn't recognize signal says no signal. Sometimes it works if you flick the on/off switch. Output from receiver...


Tv have no signal and say no signal usally not the tv,it is the incomming signal cable itself or the cables or satalites boxes problems.Tries unplug,replug the pay boxes for about an hour later,by letting the boxes upgrades it softwares,now it should functions again,if not,those pay boxes must be replaced.

Dec 15, 2010 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

We move the tv from living room to bed room and we have to change the chanel from 3 to 60 to get the tv to work on dish network, we try to change from 3 to 60 we try evereything whit no result, we call...


Rescan all the channels?Hook the tv and the satalite signal cable in the tv and dish network box correctly check?Go to tv menu.Goto SETUP,pick CH. pick option CABLE enter to rescan all channels.This should have all the channels,belong to the package u order.

Sep 04, 2010 | Televison & Video

1 Answer

Unusable Signal Message


I can;t keep my DISH satillite to turn on. when I turn the tv on and hook up the cales i get unusable signal and blue screen

May 21, 2010 | RCA TruFlat 27F520T 27" TV

1 Answer

No picture on dish tv


Hello,

The 311 receiver is normall a pretty tough machine. Getting a 70 % signal is normal, and it shouldn't fluctuate too much unless you have something like a tree or other obstacle in the way.

85% of the problems with these older systems is the LNB. I see it all the time.

My first suggestion would be changing the LNB (the eye of the dish). You say that your system is 10 years old, and there are a lot of LNB's out there that go bad over time. It may say that you are getting signal, but the quality may be so poor that the receiver may not know what to do with it.

If you have 2 LNB's (separate eyes) on your dish, then you have two singles or duals with a switch 21. I'd remove these and replace them with a Legacy Twin LNB. If you have a Twin LNB, then replace it with another Twin (especially if it has "lot" number printer in the front of it, these are notoriously bad).

I hope this helps you...

Jan 08, 2009 | RCA DISH Network(r) 311 Satellite System

1 Answer

Digital converter


If you recieve your signal on this TV over the Air (Rabbit Ears) then Yes you will need a digital Converter for this TV. If you are hooked up to Cable or a Satalite Dish, your TV will continue to work without the converter box.

Dec 29, 2008 | Emerson EWC27T3 27 in. TV/VCR/DVD Combo

1 Answer

No signal when hooking up to dish network.


I unhooked the new tv and hooked up the old one to see what channel it was on and then rehooked up the new tv and put it on the same channel as the old one.This worked but I also had to put the cable into the hook up on the back marked cable instead of the one marked HDTV.

Dec 11, 2008 | Polaroid FLM-323B Television

1 Answer

Sanyo DP 37647


What input did you connect the satalite to? Probably one of the 'video' inputs I'm guessing, which means you have to select that video source using the 'INPUT' button on your remote. (Some makers use different names but you get the idea)
Hope Ya Fix it!

Dec 29, 2007 | Sanyo DS27510 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...