Question about Xerox WorkCentre 4150 Black and White Copier

1 Answer

How can I reset the NIC on the WorkCentre 4150? I'm experiencing network configuration problems on the printer, and I was told a reset of the NIC would fix them. But I don't find in 'Tools' a command to have this done. Could anyone help me?

Posted by on

  • esteban01 Feb 02, 2010

    The 'Reset System Software' command does not reset the NIC interface nor the NVM. In fact, it is similar to power off and then power up again the machine, an operation that retain all the preset values. Even upgrading the firmware doesn't reset those settings.

    What I need is to restore the network settings to the original defaults, erasing everything that could be the problem in my network environment.
    Thanks if someone can be helpful

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

  1. From the WorkCentre, enter the Tools mode. See the Related Items below for additional information. The Tools Mode screen will be displayed.
  2. Select [Software Reset] from the Touch Screen.
  3. Select the [Reset System Software] button. A popup window will be displayed warning that jobs on the machine may be lost and asking for a confirmation before the reset is performed.
  4. Select [Confirm]. The WorkCentre will reboot the system software.

Posted on Feb 02, 2010

  • Rick Kasper Feb 02, 2010


    1. From the WorkCentre, enter the Tools mode. See the Related Items below for additional information. The Tools Mode screen will be displayed.

    2. Select [Software Reset] from the Touch Screen.

    3. Select the [Reset System Software] button. A popup window will be
      displayed warning that jobs on the machine may be lost and asking for a
      confirmation before the reset is performed.

    4. Select [Confirm]. The WorkCentre will reboot the system software.



×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox workcentre 4150 not printing test page on windows 7


Hi Cnorini ,
Check this video and solve your problem.
In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On : Xerox Printer Support

Mar 04, 2014 | Xerox WorkCentre 4150 Black and White...

1 Answer

How to clear memory on xerox 4150


its done through diagnostics. Hold the # button and press access, login with 1934, memory reset is in there some where.

Sep 25, 2011 | Xerox WorkCentre 4150 Black and White...

1 Answer

My workcentre 4150 is on my network and sometimes


Check and see if your using the PS driver for that machine, If so switch to the PCL driver. The PS one has been known to run slow.

Mar 22, 2010 | Xerox WorkCentre 4150/C All-In-One Laser...

1 Answer

We are experiencing extremely slow printing with our 4150. It will print one page and then a large delay in printing other pages. Also a delay in starting to print.


go into the options.....and go into memory . you need to increase your memory thats whats happening . increase to the highest level and that will fix it.

Dec 14, 2009 | Xerox WorkCentre 4150/C All-In-One Laser...

2 Answers

I am using a 4150 with a wireless network. Some


Try to redownload the software drivers at xerox.com.
Check the parameters, on the computers ( printers), see if they changed.
Check the menues on the 4150 menu selector for conectivity.

Oct 14, 2009 | Xerox WorkCentre 4150 Black and White...

1 Answer

Xerox WorkCentre 4150, 3 vertical white lines in all feeder scans


the problem is in the scanner, open it up and see if you can find any smudges, and clean any obstruction, any ink, liquid eraser residuals, can cause this part to appear as lines on your copied faxed image.
dont concentrate on the printer this is a scanner problem

Jul 28, 2009 | Xerox WorkCentre 4150/X Laser Printer

1 Answer

Xerox 4150 prints from Macs but not from XP


Have you updated the machine firmware? At Xerox.com the machine firmware is there to download and install. Currently the firmeware is at level 10.100.45.018. Even if your machine is new you may have an older version of firmware.
That machine has had tons of firmware updates to it and uploading the machine to the newest level probably will resolve your problem.
There are some versions that fix 300 known problems at an update.
You have to follow the directions carefully, updating it can wipe out your LDAP settings if you use scan to E-mail etc.
If you have a maintenance agreement, or the machine is less than a year old, ( there is a one year on site warrantee on that machine for on site service) call 1-800-821-2797 and request a service call to update your firmware.
Those updates are really critical for that machine to operate properly.

Feb 11, 2009 | Xerox WorkCentre 4150 All-In-One Laser...

1 Answer

Xerox 4150 Workcentre, when xeroxing and pringt copies are dark and gray. I have clean the the window but still grayish.


Sorry I didnt see your post a while back.
You shold call and have the firmware updated on that machine.
There are several firmware updates to the 4150 that resolve a lot of problems with the machine/.

Dec 04, 2008 | Xerox WorkCentre 4150 All-In-One Laser...

1 Answer

Toner installation error


take it out and try again, there are often adhesive tabs protecting certain areas of cartridges, that need to be removed, and that are not obvious

Not a guarantee, just something to try

Sep 09, 2008 | Xerox WorkCentre 4150 All-In-One Laser...

2 Answers

Xerox Workcentre m20i - tcp/ip


Good evening niebs, The first thing I would do is eliminate the network connection as an issue. The easiest way (if you don?t have a network testing device) is disconnect the network cable from the printer and connect a laptop. Then configure the laptop using the same IP, subnet mask, gateway and DNS server IP you used in the printer and test for a good network. I would make sure I had Internet access on the laptop as well as the ability to ping. This test has the added effect of ensuring these numbers are in fact correct. If you have eliminated the network connection the next thing to check is the person who configured and maintains your network and servers. Checking with them will eliminate the possibility that they have setup the network to prevent anyone from connecting network devices without permission. By default I prevent my switches from allowing people to plug in other equipment that isn?t registered with me. That trick has saved me from a lot of problems over the years. You mentioned resetting the Network Interface Card (NIC) but I would go a step further, restore the factory settings on the entire machine and start from scratch. You might want to check with your network administrator to find out what you network switch connection speed is set to. If it?s set to auto make sure your print server is as well. If that doesn?t work try setting your print server to 10Mbps, half-duplex. I?ve had some problems in the past with auto not working correctly on print servers. If this printer is still under warrantee then I would get on the phone and contact the help desk, you might just have a lemon. Let us know how things go and please don?t forget to rate the posting.

Jan 03, 2007 | Xerox WorkCentre M20i All-In-One Laser...

Not finding what you are looking for?
Xerox WorkCentre 4150 Black and White Copier Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...