Question about Canon DR-7580

3 Answers

Canon DR-7580 will scan first 12-14 pages rapidly then pauses, scans a page, pauses, scans a page... I have the exact same scanner hooked to another pc that is exactly the same.. and it flies through the whole stack of documents.. what gives??

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

More than likely the scanner settings in the software are set differently. Check to see if the slow PC has the scanner settings set to page orientation>"text orientation". If it is, then you can change it to 90 degrees or 0 degrees for a significant performance increase. The onboard memory for the DR-7580 is insufficient to run at full rated speed while performing "text orientation".

Posted on Jan 18, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

This is concerned with the buffer of images that gets stored and is not written to HDD. take a more fast HDD and use another type of USB cable. Samir Dhingra 9820800633

Posted on Jun 05, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 490 Answers

Your hard disk must be almost full. Direct the scanning software to send data to a hard Disk location where you have enough space.
S. Mohan, India

Posted on Feb 04, 2010

  • Mohan Sriraman
    Mohan Sriraman Feb 04, 2010

    On second thoughts, try and save in TIFF or JPG format. These file sizes are small. If by chance you had chosen BMP, it occupies more size, eating into your drive space.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scanning half a page


You will need to check your page settings. As each program is different, the page setup will generally stay the same. It will also change if you are scanning at 0, 90, 180, or 270 degrees as well.

Mar 04, 2014 | Canon DR-7580

1 Answer

Capture barcode at scanner Canon Dr 9080C


You will need to purchase the CD "Canon Barcode Module III" and install it on your computer: Mfg. Part: 1922B001
Then you can select it in Canon's document scanning software/Capture Perfect.

Scan-R-Store

Dec 10, 2013 | Canon DR-7580

2 Answers

Change orientation on canon dr-7580 scanner


Two step process, scan and save the image, then print and select landscape

Sep 13, 2012 | Canon DR-7580

2 Answers

How to reset counter on canon dr 7580


You need to run Qumatool to reset the counter

S. Mohan

Oct 14, 2011 | Canon DR-7580

1 Answer

When I'm scanning a document on Canon 7580 each page will show up on my computer screen with a slighly different margin (keeps shifting left to right). The document is being fed into the scanner...


Under CapturePerfect3, you can choose to deskew the scanned image while scanning itself. Also select 'Image only" radio button instead of 'Guide Plate'. The software will remove black borders around the image.
S. Mohan, Chennai, India

Jul 26, 2011 | Canon DR-9080C Path-Through Scanner

1 Answer

My Canon DR 7580 has image void in the front image. Looks like two void columns. The Image reader is clean. Can the upper and lower imager be swapped to see if the problem is the upper imager?


You cannot swap upper and lower images. You can scan the page twice (in duplex mode) by reversing the same. Ensure which side is giving perfect output.
DR 7580 is a CONTACT scanner and hence the paper has to touch the glass surface properly. There are two full sized rollers, just above/below the scanning module, which does this job. Ensure that they are proper and there is enough pressure, press and release 3-4 times to check it is stuck.
S. Mohan, Chennai, India

May 19, 2011 | Canon DR-7580

1 Answer

Canon dr 7580 is not scanning multiple pages.


Check if you have selected 'multipage' option. Then you will get only a single file, but with multiple pages.
If your question is that the second or subsequent pages are not pulled in for scanning, then you need to change the rubber rollers.
S. Mohan

Sep 30, 2009 | Canon DR-7580

1 Answer

Transfer scan settings from one computer to another?


You need to do it only once! Capture perfect remembers the previous setting. If you install Capture perfect in another system it will be only in the defalut mode. You cannot transfer the settings
S. Mohan

Dec 02, 2008 | Canon DR-7580

1 Answer

DR-7580


About 99% of the time, there is something stuck on the lens. Our clients that use these are hard to convince of this, but often if you take a small flashlight, you can either find something stuck on one of the lenses or there's a scratch on one. If it's scratched, you're out of luck and will have to replace it. Otherwise, use a light alcohol based pad and clean with it wrapped around your fingernail. Kodak scanner cleaning supplies work great.

Aug 07, 2008 | Canon DR-7580

1 Answer

Imprinter won't work on DR-7580/9080C


I have the same model Canon DR-9080C scanner which I recently acquired and I'm trying to figure out how used it is. I see many referrign to a counter. I see the big LCD on top front, but how do you know how many total pages have been scanned through it? I read somewhere there is a mechanical scanner. Is this true?

May 31, 2008 | Canon DR-9080C Path-Through Scanner

Not finding what you are looking for?
Office Equipment & Supplies Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2012 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...