Question about Projection Televisions

1 Answer

I( just bought a new lcd tv today and i cannot get the remote to work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 979 Answers

Let's assume that the batteries are fresh and have been placed correctly within the remote. If that's the case, you'll need to address the manual that came with your set, and maybe even return the remote to where you got it. Oh yeah. Make sure that you have selected the correct device before pressing the other buttons...accordianman

Posted on Feb 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a remote for model # pt46dl10 akai tv lcd 46 in


have same tv searched and tryed alot of universal ones that where supposed to work but did not finnaly found out only logitec harmony 550 universal remote works bought on on craigslist for 65 candian and works perfect with this model

May 05, 2009 | Akai PT46DL10 46" HDTV-Ready Television

7 Answers

On Off Code for Sens 22" HDTV/DVD Combo unit


I just purchased the 19' SENS LCD TV + DVD and have DirectTV and was able to get the tv to work with the remote using Samsung as the manufacturer and 10178 for the code.

Dec 26, 2008 | Projection Televisions

2 Answers

Can not change channels on TV


Good Day;

To reset the TV unplug power cord from the wall for 2 to 5 minutes then plug back in.

Good Luck, big IRISH.

Sep 26, 2008 | Hitachi Projection Televisions

1 Answer

Daytek dt 3220 will not power on


OK, your Daytek 3220 is not a projection TV, but an LCD TV.

Second, I hate to say it, but you bought a piece of junk. They have excellent pictures when they're new, but after a few years capacitors in the power supply go bad. When this happens, either the controls and remote stop working, or the TV starts blanking out, or it will just die and never work again.

The solution is to go buy a new TV. The power supplies are no longer available, and even if you could get one very often the faulty power supply has damaged the main board and/or the LCD panel.

In about 5% of these cases, replacing the capacitors will get the TV to work, in about 25% it will get the TV to work, but because the main board has been damaged the TV will intermittently blank out. In another 25% the LCD panel has been damaged so once repaired you will see dark streaky patches across the display.

In the rest of the units you could have all three problems or any combination of them.

It'ds really too bad because they use a Samsung panel, and have excellent pictures when they're working.

Jul 23, 2008 | Pioneer SD-643HD5 64" Rear Projection...

1 Answer

I bought a Samsung 46" LA46F81BD today pluged it in and tune the tv. The picture was great after about 30 minutes the TV went blank and lost picture. I still have audio. does anyone know what the...


If this is a projection TV,you may have suffered premature lamp failure.If it's an LCD,could also be a backlight lamp failure.Either way,it should be under warranty if it's new.

Mar 13, 2008 | Projection Televisions

2 Answers

Sharp 32" LCD tv, screen going blank every few minutes.


Hide the remote from the set for awile and see if that magically "cures" this symptom....accordianman

Feb 27, 2008 | Projection Televisions

1 Answer

65H81 remote and green screen


Yes you can get the service manual at the following link for 10.99 and they will contact you to see if you would like the manual emailed to you. Here is the link.
http://servicemanuals.vstore.ca/

Feb 02, 2008 | Toshiba 65H81 65" Rear Projection...

1 Answer

P52930bl RCA Projection 52" Remote problem


First thing you want to do with this set would be to unplug it for at least a 24 hour period. if that does not work, the remote sebsor could be defective. if you want to just replace the sensor and not trouble shoot the set, it should be located behind a plasit cover in the front of the set, or located inside the reflection area of the TV set. Differant models are located at differant positions. If you have no electronic experience, play it safe and call in a trained tech to assist you in this repair. Good Luck Please do not forget to rate this thread.

Dec 14, 2006 | RCA P52930BL 52" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...