Question about Televison & Video

1 Answer

Dead tv The tv worked fine till it was stored for a year. Plugged it in & now dead. Fuse ok. Approx. 60 vdc on HOT. Thanks

Posted by on

  • WARDOTZWRD17 Jul 12, 2008

    There is no power or sound, I turn tv on and no voltage is available. TV IS A 2004 BROKSONIC TV.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,138 Answers

If this set has been sitting in storage this long theres no telling what could be wrong . Take set to a repair shop.ThankYou for trying FixYa. Have a Nice Day.

Posted on Feb 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Vizio VP422HDTV10A tv that is dead. My local power company dropped a power line on the one leading to my house and tv has not worked since. When I plug the tv in, I can hear the relay click and...


this tv was working well but allof saddent one day it was rainning then it black out just like that the n i took to technician and diagonise it the told me it was the integrated circuit foulty number 2A10709 HELP with thsolutions.

Sep 11, 2013 | Vizio VP422HDTV10A 42 inch 720p LCD HDTV

1 Answer

Sharp Aquos 65" LCD: LC65D64U DEAD no power


To get the accurate values to all the pins and test points, you have to download the repair manual to this set by internet. If you wish to get some details about the voltage charts, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up previous posts there, either by its left side bar, or view it in Timeslide option.

Jul 09, 2013 | Sharp Aquos LC65E77UM 65 in. LCD HDTV

1 Answer

The fan control in the dashboard no longer turns the fan on at all. For a while, it would work intermittently, but now it's just dead. what is the best place to start troubleshooting this? thanks!


FIrst I would suggest checking the heater fuse. If it is OK, the nexxt thing I would do would to be to tap on the side of the blower motor with a hammer. If the brushes are stuck, some light tapping may loosen the brushes from the armature. If that does not work, remove the wiring connector from the blower motor, and check for voltage. Low should be 3 volts DC, low medium is 6 VDC, High medium is 9 VDC, and high is 12 VDC. If you have no voltage, and the fuse is good, you need a switch.

Oct 27, 2009 | 1997 Toyota Corolla

1 Answer

Typical Lifespan


run her till she quits running probally be fine for a long long time keep her squeakey clean okay

Apr 02, 2009 | RCA G35773SK 35" TV

1 Answer

My 30 gig Ipod video kills the battery. my son gave it to me and I didn't use it for about a year and when I tried it was dead. plug it in & charge then dead in approx 30 mins EVEN IF i DON'T TURN IT ON! I...


this sounds like a hardware problem it might not be the battery but maybe something else it could be th hard drive it probably doesnt turn off, check the apple store ask the people there.

hope this helps, Cameron

Mar 11, 2009 | Apple iPod MA446LL/A MP3 Player

1 Answer

Phillips 60 in. rear projection approx. 10 years old


This is a common problem with the older models. The opt chip fails. You can get a repair kit at www.magnavoxhelp.com. After a few months of getting smaller and smaller the audio and video will go out but the power light will remain lit. 

Aug 18, 2008 | Philips 60P8341 60" Rear Projection...

4 Answers

Unable to turn TV on at all


HAD same problem, TV went click, turned off, dead. Could not reset by unplugging, remote wouldn't work. Suspected power supply related problem. Pulled back cover off (6 screws, 4 along top, 1 in each bottom corner). Pull cover back slowly as there are a few wires that are secured to screen by a plastic retainer - located on left side as viewed from rear. Just untwist the retainer to give you more slack to pull cover back, put wires back later. I replaced the BLOWN FUSE located on circuit board at left rear where the power cord comes in and connects to same circuit board. My local TV parts and service stores would NOT sell the fuse to me, they wanted a service call out of the deal. So, I ordered the fuse online from PARTSTORE.COM out of NY. The fuse is Panasonic Part #XBA2A00101F, is 6.3A @ 125VAC, and costs $1.95. I DO realize that the fuse blew for reasons unkown, but at least I have my TV back until another day.

Oct 12, 2007 | Panasonic CT-32HC14 32" TV

1 Answer

TV doesn,t turn on


the power regulater for your system have a short take it to a tech to have him fix it orelse you might cause further damage.

Feb 17, 2007 | RCA P46812BL 46" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72601 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...