Question about Whirlpool LHW0050PQ Front Load Washer

2 Answers

Loud clanking noise during spin cycle. Will not

Loud clanking noise during spin cycle. Will not spin during the whole final spin cycle and clothes are wet.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Some of the support items for the drum (springs / shocks) may have worn out have partially failed. Front loaders usually have both items with springs on top and shocks on bottom.Open access panels front and top, check for worn/missing/broken springs and shocks that might be leaking fluid. Replace as needed.

Posted on Feb 23, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 3,463 Answers

If it is a front loader, then remove the rear panel, remove the belt, and soin drum by hand, if it feels rough, or is noisy and rumbling, then the main drum bearings have failed.
This is a major repair.

Posted on Feb 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loud noise during spin cycle now they are stacked


a loud noise comes when you forget to remove shipping bolts after installation or if the shocks are worn out it makes noise thirdly the bearings might be worn out if the washer is more than 6years old

Jan 21, 2013 | LG Cherry Red Steamwasher Wm2487h Front...

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired


Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Loud banging noise during rinse


Most noises from a washing machine occur during the rinse or spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer

1 Answer

Makes loud noise when on spin cycle


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jan 09, 2010 | Amana 3.2 cu. ft. Top-Load Washer

1 Answer

FWT449GFS2 making loud banging noises during final spin cycle


lxr6232eqo making loud banging noises during final spin cycle

Aug 31, 2009 | Frigidaire Washing Machines

1 Answer

Model 110 washer will not go into a final high speed spin.


hi, i would suggest the timer/programmer is faultyas it is ok on the other cycles, the noises you have described may have caused some damage,

Feb 10, 2009 | Washing Machines

1 Answer

Mah3000 aww making extremely loud, clanking, grinding during spin


Gotta admit tonytools albeit not cheap has the best easiest tool to do that rough difficult repair.

Jan 01, 2009 | Maytag Neptune Washer

1 Answer

Rattling noise during spin cycle


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Nov 12, 2008 | Maytag MAH2400A Front Load Washer

1 Answer

Noise during spin cycles


GE WPXH214ACC Washer drum makes loud noise when spinning sometimes. We've had it since 2005 & never had this happen before. Washer is level, must stop & redistribute clothes to correct. Just started happening now.

Oct 12, 2007 | Washing Machines

Not finding what you are looking for?
Whirlpool LHW0050PQ Front Load Washer Logo

1,133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...