Re: Hi my name dale my actvite key wrong and not working
Dale, It would be best to call microsft and activate over the phone. Its actually easier than it sounds. I do rebuilds and need to activate over the phone.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The inner connection to the gas plumbing is pretty much the same across lots of grills. If you're looking for a screw-on to the propane tank, regulator/valve, and hose, then this will likely work Robot Check Hmm, it's coming up as Robot Check on the link name for me, but clicks through to Amazon. you can also go to Amazon and search for 'Sturgis Propane LP Gas Replacement 21" Hose & Regulator 3/8" Swivel End'
The programming of the individual paths is done in CCR programming. First you have to disable the CCR tree to change the programming This is accomplished by entering feature983>password>AA>table>Gtng table:1 (might be a different table but 1 is the most common)>press either ok or next til you see CCR tree: 1 then press CHNG and disable. Next press the * key til you return to the main menu ( mbox AA OTHR) and press the OTHR soft key. Press the CCR soft key >admin>and the tree number(probably 1). At this point it asks for a "path" number. A path is the action when a certain digit is pressed (1 for Dale..) Enter path 1> transfer>int>and 223 (which is dales extension number) and ok.Continue with the remainder of the paths until done.Next press the END soft key and the SAVE>SAVE as tree 1 YES soft keys. Lastly don't forget to re-enable the CCR programming AA>table>GTNG table:1>>>>> CCR tree: disable. CHNG>and the number 1. Press the Rls key when finished.
×