Question about Casio FX-9750GPlus Calculator

Ad

It's not on a key but in a menu. It's in the Math menu, the Complex menu, and the Matrix menu, depending on the type of the argument.

Posted on Feb 01, 2010

Ad

Hi,

a 6ya Technician can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.

click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Goodluck!

Posted on Jan 02, 2017

Ad

Mean absolute deviation.

Let's break it down into its components.

Mean - Average

Absolute - absolute value - sign doesn't matter - if negative, make positive

Deviation - difference from the mean

Let's do an example. Population 3 7 4 2. Total 16. Mean (Average) 16/4 = 4.

Deviations

3 - 4 = -1 absolute value 1

7 - 4 = 3

4 - 4 = 0

2 - 4 = -2 absolute value 2

Sum of these deviations 1 + 3 + 0 + 2 = 6

Mean (average) of these deviations is 6 / 4 = 1.5.

Good luck,

Paul

Let's break it down into its components.

Mean - Average

Absolute - absolute value - sign doesn't matter - if negative, make positive

Deviation - difference from the mean

Let's do an example. Population 3 7 4 2. Total 16. Mean (Average) 16/4 = 4.

Deviations

3 - 4 = -1 absolute value 1

7 - 4 = 3

4 - 4 = 0

2 - 4 = -2 absolute value 2

Sum of these deviations 1 + 3 + 0 + 2 = 6

Mean (average) of these deviations is 6 / 4 = 1.5.

Good luck,

Paul

Apr 05, 2016 | Texas Instruments TI-30Xa Scientific...

You must consider two cases.

**1st case:** What is inside the absolute value symbols is supposed **positive**. Remove the absolute value symbols and proceed to solve.

**2nd case:** What is inside the absolute value symbols is supposed **negative**. Enclose the contents of the absolute value within parentheses, put a negative sign in front the left parenthesis, and proceed to solve.

Gather the solutions obtained in the two cases. Use a Union symbol for the solution set.

Gather the solutions obtained in the two cases. Use a Union symbol for the solution set.

Oct 08, 2014 | Office Equipment & Supplies

Be careful what you say. There is no such thing as an absolute bar. There is a function called the absolute value. To represent it one uses two vertical bars (pipe symbols) '-13' =13,

**'a-b'= a-b **if** a-b>0, **

and

'a-b'=-(a-b)if **a-b<0**

and

'a-b'=-(a-b)

Feb 26, 2014 | Casio fx-300ES Calculator

It calculates the absolute value. The absolute value of a number is the number if it's positive, otherwise it's the negative of the number.

Oct 30, 2013 | Casio FX-115ES Scientific Calculator

Vacuum is the difference between the absolute pressures of the intake manifold and atmosphere. Vacuum is a "gauge" pressure, since gauges by nature measure a pressure difference, not an absolute pressure. The engine fundamentally responds to air mass, not vacuum, and absolute pressure is necessary to calculate mass. The mass of air entering the engine is directly proportional to the air density, which is proportional to the absolute pressure, and inversely proportional to the absolute temperature.

Sep 23, 2013 | 2001 Pontiac Grand Am SE

P0106 GMC - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance

Possible causes - Faulty Manifold Absolute Pressure sensor

- Manifold Absolute Pressure harness is open or shorted

- Manifold Absolute Pressure sensor circuit poor electrical connection

- Faulty Engine Control Module (ECM)

Possible causes - Faulty Manifold Absolute Pressure sensor

- Manifold Absolute Pressure harness is open or shorted

- Manifold Absolute Pressure sensor circuit poor electrical connection

- Faulty Engine Control Module (ECM)

Apr 08, 2013 | 2002 Volkswagen Jetta TDI

I will assume this is a "P" code.

P0108 FORD - Manifold Absolute Pressure/Barometric Pressure Sensor High Inputhttp://engine-codes.com/p0108_ford.htmlForum CodePossible causes- Manifold Absolute Pressure harness is open or shorted

- Manifold Absolute Pressure sensor poor electrical circuit connector

- Faulty Manifold Absolute Pressure sensor

- Faulty Engine Control Module (ECM) When is the code detected?The Engine Control Module (ECM) has detected a performance fault with the anifold Absolute Pressure (MAP) sensorSymptoms- Engine Light ON (or Service Engine Soon Warning Light)

- Engine rough idle

- Engine hesitation

Read more: http://engine-codes.com/p0108_ford.html#ixzz21lGYXzRP

P0108 FORD - Manifold Absolute Pressure/Barometric Pressure Sensor High Inputhttp://engine-codes.com/p0108_ford.htmlForum CodePossible causes- Manifold Absolute Pressure harness is open or shorted

- Manifold Absolute Pressure sensor poor electrical circuit connector

- Faulty Manifold Absolute Pressure sensor

- Faulty Engine Control Module (ECM) When is the code detected?The Engine Control Module (ECM) has detected a performance fault with the anifold Absolute Pressure (MAP) sensorSymptoms- Engine Light ON (or Service Engine Soon Warning Light)

- Engine rough idle

- Engine hesitation

Read more: http://engine-codes.com/p0108_ford.html#ixzz21lGYXzRP

Jul 26, 2012 | 2003 Lincoln Aviator

We do not have this make so I can only provide a general description of the codes meaning and poss causes.

P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input

Possible causes- Manifold Absolute Pressure harness is open or shorted

- Manifold Absolute Pressure sensor poor electrical circuit connector

- Faulty Manifold Absolute Pressure sensor

- Faulty Powertrain Control Module (PCM) or Engine Control Module (ECM)

P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input

Possible causes- Manifold Absolute Pressure harness is open or shorted

- Manifold Absolute Pressure sensor poor electrical circuit connector

- Faulty Manifold Absolute Pressure sensor

- Faulty Powertrain Control Module (PCM) or Engine Control Module (ECM)

Jun 15, 2012 | 2004 Proton Gen-2

Hey it is. Okay, so start with a equation: say, y = -(1 |x|).
Now type y = -(1 , then press the [OPTN] button, next to the shift. Next press the [NUM] button or F5. The first menu button should be Abs or absolute value. When your done it should look like this.
y = -(1 Abs (x)) then graph it.

Aug 18, 2010 | Casio FX9750GII Graphic Calculator

The absolute value button is "SHIFT", "Abs" (located on the "hyp" key)

Apr 07, 2009 | Casio FX-115ES Scientific Calculator

38 people viewed this question

Usually answered in minutes!

×