Question about Cameras

1 Answer

Firmware Problem with Fujifilm J30

Getting this error message when I turn device on:

''Use AC adaptor for Firmware Upgrade
version 1.01''


All buttons locked out/not responding other than power button.

Posted by on

  • n_belcher Feb 02, 2010

    Hi. Camera is fully charged, still no buttons responding.

    Still has same firmware message.!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 11,967 Answers

Are you currently trying to do a firmware upgrade?

Posted on Feb 01, 2010

Testimonial: "Yes. All buttons on the camera are not responding. Very weird."

  • Ty Price Feb 01, 2010

    Did you plug in the ac adaptor as the message requests? Sometimes just making sure the battery is fully charged is all you need.

  • Ty Price Feb 02, 2010

    Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuji FinePixViewer booting error.


Your operating system is probably outdated for the firmware of the device you are trying to connect. Upgrade.

Dec 21, 2012 | Fujifilm Finepix A900, A825, A820, A610...

1 Answer

It does not turn or or charge. Connected to laptop but got same results. Tried to install latest software but it would not the unit (forerunner 305). Message was that there was no unit connected...


Here's a few options: Soft Rest

- Hold down MODE + RESET for few seconds
- Press the Power button to turn on the device

------------------------

Hard Reset
(This will erase all of your data inside the device)

- Hold down MODE + RESET + POWER for few seconds
- Press the Power button to turn on the device

------------------------

Firmware Downgrade/Upgrade (2.9 > 2.8 > 2.9)
(This will erase all your data inside the device)

Software Downgrade/Upgrade

- Connect your Garmin Forerunner 305 to the computer
- Press the UP arrow button and hold while doing all the other steps below
- Press MODE + RESET for a moment (the computer will recognize the device)
- Dowload the Firmware from Garmin's website.
- Downgrade Firmware from 2.90 to 2.80. (You are still holding on that UP arrow button!)
- When the update is finished the Forerunner 305 should power on running the Firmware 2.80.
- Let go of the UP arrow button, disconnect the device from USB, connect it again and the computer should recognize it normally
- Update the Firmware to the current version.

Nov 04, 2012 | Garmin Forerunner 305 GPS Receiver

1 Answer

D-Link DI-514 Router Firmware Upgrade Error Message


This is an old post, but just in case someone else needs this...

The dlink website for the Di 514 rev B version actually links to the rev C versions' firmware. I got the same error.

browse to here ftp://ftp.dlink.com/Gateway and grab the right version for your rev B device.

Best,

Kevin

Oct 04, 2012 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

How to solve service error 49.00 in hp laserjet 2430dtn printer


49.XXXXX ERROR
A critical firmware error has occurred.

1. Press Cancel Job to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on again.
3. Go to http: www.hp.com/support/lj2410, www.hp.com/support/lj2420, or
www.hp.com/support/lj2430. Click Download Drivers and Software. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the
one installed on the printer and the printer can receive a firmware update,
download the newer firmware upgrade. Not all printer models can
receive firmware upgrades.
4. Try printing a job from a different software program. If the job prints, go
back to the first program and try printing a different file. If the message
appears only with a certain software program or print job, contact the
software vendor for assistance.

1. After performing the actions listed in the preceding item, if the message
persists when using different software programs and attempting specific print
jobs, disconnect all cables that connect the printer to the network or a
computer.
2. Turn the printer off.
3. Remove all memory DIMMs and thirdparty solutions from the printer.
4. Remove all of the EIO devices from the printer.
5. Turn the printer on.
6. If the error message disappears, reinstall each DIMM, Compact Flash card, and EIO device one at a time, making sure to turn the printer off and then on again (booting to the Ready
prompt) as you install each device. To replace a DIMM, see Appendix D - Printer memory and expansion in the LaserJet 2400 Series User Guide.
7. Replace the DIMM or EIO device that caused the error message.
8. Remember to reconnect all of the cables that connect the printer to the
network or computer.
9. If the error message persists, reinstall the firmware with the latest possible firmware upgrade. Go to http:www.hp.com/support/lj2410, www.hp.com/support/lj2420, or www.hp.com/support/lj2430. Click Download Drivers and Software.
Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the one installed on the printer and the printer can receive a firmware update,
download the newer firmware upgrade. Not all printer models can receive firmware upgrades.
10. Replace the formatter

Feb 28, 2011 | HP LaserJet 2430dtn Printer

1 Answer

I am using the airport express to play itunes through my stereo only. I unplugged the unit to move it to a more convenient place and now I cannot to get it to work. It was working well before. I...


From my reading at the Apple support web site, it appears that you may need to download the latest version of the Airport Utility in order to get around this issue.
Additionally, Apple has just recently come up with an update to the firmware for this device.
Try downloading the latest version of the Airport Utility (Mac or Windows) and see if that doesn't resolve the issue.
After installing the latest version of the Airport Utility, try to connect to the Airport Express. If that is successful with the new version, click the "Manual Setup" button to display the "Summary" page for the Airport Express.
Next to the entry for "Version:" there should be a button to press to upgrade the firmware to the latest version (7.5.2). Perform the upgrade by following the on screen directions.
After the upgrade, again attempt to connect to the Airport Express using the Airport Utility. This should work as expected.
Before attempting to use the AirTunes (recently renamed "AirPlay"), make sure that you have the latest version of iTunes installed.

Dec 27, 2010 | Apple AirPort Express Base Station with...

1 Answer

Error message on my LCD


download proper firmware for your model from philips website and complete firmware upgrade. That should solve your problem.

Dec 03, 2009 | Philips 42PFL3603D/27 42 in. LCD TV

2 Answers

Grey Photos


Early production versions of the S1000 had this error in the firmware. There is a firmware upgrade that addresses this problem. Here is a link to the upgrade; http://www.fujifilm.ca/x16655.xml
Later versions of the S1000 came from the factory with this version of the firmware, and the colour problems stopped. Customers of mine who have performed the upgrade all report the problems to be rectified.

Jan 27, 2009 | Fuji FinePix S1000FD Digital Camera

1 Answer

Lcd screen stuck in usb mode?


Try removing batteries and card and leaving them out for a while to allow camera settings to default.
Replace batteries only and see if you get "Card Error" message.
If you get this, then try again with card fitted
Check firmware version

Possibly card storage too big. Upgrade firmware to version 1.77

If you have no user manual there is a PDF version available to download here:

http://www.fujifilm.co.uk/consumer/digital/digital-cameras/legacy-cameras/finepix-a330-zoom/Support

All the error messages are given in the manual with possible solutions.

Aug 25, 2008 | Fuji FinePix A330 Digital Camera

2 Answers

Firmware Upgrade Failed


Firmware upgrade is a simple but a delicate procedure. Make sure you are loading the correct firmware. You should get your firmware from the website of your router. Installing a THIRD PARTY firmware to your router voids the warranty of your router. Here is a tip for a successful firmware upgrade. BEFORE FIRMWARE UPGRADE(push the reset button of the router for 30 seconds then unplug the power of the router for 10 seconds). Upgrade the firmware. After the upgrade push the reset button again for 30seconds, unplug power for 10 seconds.

Mar 10, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Cameras Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...