Question about Uniden 5.8GHz Dual Cordless Phone

3 Answers

I have the Uniden TRU9085-3 Series (base answering machine and 3 handsets). I have two sets in the house and want to join them so that I don't have to use both bases ... but when I try disconnecting one base I get message "handset out of range" ... how can I do this?

Posted by on

  • jan_swain Feb 02, 2010

    Agree but how do I do that? I have tried without success so figure I must be missing some step.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To clear the base of all phones.  Missing or not. for the uniden tru9085 3 cordless phone  

First deregister any phones that you already have.  You can do it by linking to the base, or you can do the 'remove battery, press key, insert battery' method.

Once that is done:

1. Disconnect ac adapter
2. Press hold dnd ,middle soft key, star key, hold at the same time.
3. Reconnect ac adapter while holding three keys
4. Long beep release button

Done!

Posted on Feb 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Uniden Master
  • 7,993 Answers

You must register the orphan handset to the base you are keeping.

Posted on Feb 02, 2010

  • k24674 Feb 02, 2010

    Here are the details from the manual.
    1. Deregister from its original base (screen capture 1)
    2. Register it to new base (screen capture 2)





×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Uniden TRU 9085-3 Cordless Phone and we can not find the manuel. It's dual phones with a base.
The phone ring is very quet so we can't hear it.
How to make the ring louder or where to get the manual. I checked on Uniden Website, they don't have this model.
Thank you

Posted on Feb 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I setup a Uniden Dect 5.8Ghz 8155+2 phone


Uniden XDECT 8155 + 2 Questions & Answers ...

www.productreview.com.au > ... > Uniden > Uniden XDECT 81xx Series
Uniden XDECT 8155 + 2: 25 questions and 38 answers on Australia's largest opinion ...and select Handset Setup or Base Setup. ... If you have a 2.4 ghz or 5.8 ghz modelphone use web address below. .... Uniden Premium DECT 31xx Series.

Nov 23, 2015 | Uniden Lands Phones

1 Answer

Base handset has interference.


If you still have a regular phone about, plug it inhere the base handset is connected and see if the symptoms remain. If they do, the problem is likely with your house wiring or the phone company. If no interference on the regular set, base handset may be defective. Try it at someone else's house.

Radio Shack (hurry :) has in-line filters that may clear up line noise.

All he best

Mar 06, 2015 | Uniden DECT2188 DECT 6.0 Expandable Corded...

1 Answer

How does one use the intercom


To Page another phone to initiate intercom:-

From the base station - press Find hs/Intercom.
From a handset - Press Intercom/clear.

Then select the station you want to talk with or All to
page all stations at the same time.

To answer a page:-

From the base station - press Find hs /Intercom or Speaker.
From a handset - press Intercom/clear or Talk/Flash.

Hope this helps

Ive also included a link to the D1785 Series User's Guide








http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/D1785om.pdf

Feb 01, 2014 | Uniden D1785-3t Dect 6.0 Cordless Phone...

2 Answers

How do i turn off the silent mode on a uniden phone, ive held down the # sign and nothings happening


Silent Mode
You can silence the ringers on the base and all handsets for a specific period of time; the answering system answers any incoming calls without playing anything through the speaker.
With the phone in standby, press and hold # on any handset. The phone prompts you to select the number of hours (1 - 9 or Always On) that you want it to stay in silent mode.
To confirm, press # or just wait about 5 seconds. The phone turns on the answering system and displays Silent Mode On on each handset.After the selected number of hours, the phone automatically exits silent mode. To exit silent mode manually, press and hold # again.
If the phone is in silent mode and you turn off the answering system, the phone exits silent mode.
Multihandset Features To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came with the base and up to 11 DCX160 accessory handsets.You must register accessory handsets to the base before using them. (Handsets that came packaged with the base are already registered.)Handsets that aren't registered display a Not Registered message. For registration instructions, see p. 18, or see the accessory handset manual.If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 18, or see the accessory handset manual.Conference Calling
When an outside call comes in, two handsets can join in a conference call with the outside caller.
To join a call that's already in progress, just press Talk/flash or SpeSpeSpeaker.To leave the conference call, hang up normally; the other handset remains connected to the call.

Aug 18, 2011 | Uniden DECT 2080-5 Quint Phone

1 Answer

Add more handsets to uniden phone


Add more handsets to what model Uniden phone?

Jan 15, 2010 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Two sets Uniden phones with base, second handset: incompatible?


I had the same problem with a Uniden 3355 handset and 2355 base. With the new handset I pressed "Menu" and selected "System Reset". I then Selected "Deregister HS" and followed the prompts.
Once this was complete, I returned to "System Reset" and selected "Replacing Base". Following the prompts, when it said "Register Handset" I put it in the base of the 2355, and within a minute it had registered, so both handsets used the base of the 2355!
S.

Jan 09, 2009 | Uniden Cordless Phone

1 Answer

How to set up uniden phone to base


If the handset has previously worked with the base - press the hangup button and the # key at the same time on the handset for five seconds and follow the prompts to deregister the handset. (System reset - deregister HS - which handset) It will tell you that the handset is deregistered. Then put the handset onto the base and it will register the handset.

Dec 14, 2008 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Uniden powermax 5.8 handset


place both handsets on the recievers for 24 hours so they can register to there spots

Dec 28, 2007 | Uniden TRU8885 Digital Answering Machine

Not finding what you are looking for?
Uniden 5.8GHz Dual Cordless Phone Logo

926 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...