Question about Uniden BC72XLT Handheld Scanner
Here is the directions to store frequencies in your scanner:
Storing Known Frequencies
1. Press Hold. Then enter the channel number
where you want to store a frequency, then press
Func and Pgm. The channel number appears.
2. Use the number keys and to enter the
frequency (including the decimal point) you want
3. Press E to store the frequency into the channel.
• If you entered an invalid frequency in Step 2,
Error appears and the scanner beeps three
times. Enter a valid frequency.
• The scanner automatically rounds the entered
number to the nearest valid frequency.
For example, if you enter 151.473 (MHz), your
scanner accepts it as 151.475.
• When you enter a frequency into a channel, the
scanner automatically turns on the delay
function and DLY appears. When delay is turned
on, the scanner automatically pauses scanning
Operation 2 seconds after the end of a transmission before
scanning proceeds to the next channel. To turn
the function off or on, press Func + Dly.
• If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was
duplicated. If you entered the frequency by mistake,
press then enter the correct frequency.
To enter the frequency anyway, press E to
4. To program the next channel in sequence, press
E then repeat Steps 2 and 3.
Posted on Feb 19, 2008
Tips for a great answer:
Jul 09, 2011 | Uniden BC72XLT Handheld Scanner
Jul 08, 2011 | Uniden BC246T Handheld Scanner
Oct 26, 2010 | Uniden BC72XLT Handheld Scanner
Feb 07, 2010 | Uniden BC72XLT Handheld Scanner
Nov 20, 2009 | Uniden BC72XLT Handheld Scanner
Jun 12, 2009 | Uniden BC72XLT Handheld Scanner
Mar 10, 2009 | Uniden BC72XLT Handheld Scanner
Aug 31, 2008 | Uniden BC246T Handheld Scanner
316 people viewed this question
Usually answered in minutes!