Question about HP LaserJet P2015dn Printer

1 Answer

I have 2 HP LaserJet P2015 with the same IP Address and have tried re-setting one back to factory settings by holding down the go and cancel buttons when switching the printer on, but it is still keeping the IP Address. HELP

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 232 Answers

Hi Sue_sams

If you know the IP address of the printer then you should be able to do a reset via it's internal GUI.

1. Make a note of the printers IP (if you print a status page by holding GO for 5 seconds it should give you this).

2. Open up Internet Explorer. Where you would normally type www. type the ip address of the printer (make sure there is nothing else in front) and hit enter.

3. Click on the 'Networking Tab' and give the printer the IP that you want it to have.

For further help a PDF of the manual can be found here. Details of the Embedded Web Server are on page 54.

Hope this helps and good luck!

Scott

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm printing labels on my printer. After each run, the printer prints out an hp advertisement page for buying supplies, etc. Almost like a test page. How can I delete this annoying and wasteful...


Try this:
But first print a configuration report.(contain IP address)
Configuration Report
Release GO after LED begins blinking.
Now:
Reset the factory default settings (cold reset)
Turning on the printer while pressing the GO and CANCEL JOB buttons restores the factory default settings.
1 Turn off the printer.
2 Press and hold the GO and CANCEL JOB buttons.
3 Turn the printer on and continue to press and hold the buttons until all three LEDs are blinking.
4 Release the buttons.

Jul 13, 2011 | HP LaserJet 1022n Printer

2 Answers

I replaced a hp laserjet p2015 printer with another hp laserjet p2015 printer but it can't print.what's the problem,pls help me



This HP printer is comes with the USB cable. To install the printer software, you need to install the USB driver compatible to your printer and then it will ready to print.

Dec 08, 2010 | HP LaserJet P2015 Printer

1 Answer

How to Reset HP Laserjet M1522nf security password


Hi the easiest way is a nv ram

1. Turn the printer off
2. Hold down the down arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

This reset will clear all of your saved settings and contacts, if networked print out a configuration report after resetting the printer to view the ip address (IPV4). If the IP address has changed you will need to update the print driver's port tab and update the port.

Good Luck

Al,
Eliteprintersolutions@gmail.com

Jun 16, 2010 | HP LaserJet M1522nf Multifunction Printer...

2 Answers

I am unable to reset the admin password on a company printer HP laserjet p2015dn. I treid doing a cold reset by holding the go button while restarting the printer for about 10 seconds and the configuration...


Try to change the password over the network by tyoing the assigned IP address into your browser URL. If you can see the P2015, you should ba able to find the place to change or disable the admin password. If not, perform a Super NVRAM Initialzation:

  1. Turn off the HP Laserjet P2015 Printer.
  2. Press and hold the Go button.
  3. Turn on the printer and continue to hold the Go button for at least 50 seconds. During this process, the Attention, Ready, Go lights turn on. Then the Attention and Ready lights turn off,leaving only the Go light illuminated.
  4. Release the Go button. The Go, Ready and Attention lights turn on.
  5. Press and hold the Go button. All lights turn off. During the next three seconds, the Go, Ready and Attention lights turn on in that order, one per second.
  6. Release the Go button to perform the initialization. The control panel lights begin cycling from front to back. After the Super NVRAM initialization process is complete, the printer returns to the ready state.

May 02, 2010 | HP LaserJet P2015dn Printer

1 Answer

I have M1522n laserjet Hp printer and keep getting error message 10.1000 supply memory error what does this mea


Hi Paul,

That simply means that their is a problem with the chip installed on the toner cartridge, try doing a nvram

1. Turn the printer off
2. Hold down the down arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

This reset will clear all of your saved settings and contacts, if networked print out a configuration report after resetting the printer to view the ip address (IPV4). If the IP address has changed you will need to update the print driver's port tab and update the port.

If this doesn't work contact Hp directly, 1800-334-5144.

Al

Feb 12, 2010 | HP LaserJet M1522n MultiFunction Printer

1 Answer

Remove black catridge error in hp laserjet m1522nf printer & paper not taking


1. Turn the printer off
2. Hold down the down arrow and the cancel button
3. Reboot the printer while holding the buttons and hold until permanent storage is displayed. Let go of the buttons and wait for the ready message on the display.

This reset will clear all of your saved settings and contacts, if networked print out a configuration report after resetting the printer to view the ip address (IPV4). If the IP address has changed you will need to update the print driver's port tab and update the port.

Oct 31, 2009 | HP LaserJet M1522nf Multifunction Printer...

2 Answers

Laserjet p2015dn i am trying to set it up and i can not find the password to access the config menu


Hi in LJ P2015 there is no way to set-up password.
Press and hold download green button for 6 to 7 seconds(Not more than 7 seconds) and release it will print self test configuration page on third page netwrok configuration page three is a option called IP Address put that IP Address in the browser it will open printer page and you will be able to browse the printer.

Dec 29, 2008 | HP LaserJet P2015 Printer

1 Answer

Metwork card


Hello,

Your printer is a dn model, which means it is duplex + network. Please unplug the network cable and perform the following:

Cold reset A cold reset changes most system parameters in NVRAM to the factory defaults. However, unlike NVRAM initialization, a cold reset does not reset the page count, the paper tray sizes, language, or formatter number.
A cold reset also resets all the HP Jetdirect settings as well as the printer settings. Use the following procedure to perform a cold reset.
  1. Turn off the printer.
  2. Press and hold the Go button.
  3. Turn the printer on, and continue to hold the Go button for at least 5 seconds, but not longer than 15 seconds. During this process, the Attention LED turns on.
  4. Release the Go button.
    If both the Attention and the Ready LEDs turn on before you release the Go button, you must start the procedure again with step 1.
The printer's LEDs begin cycling. The cold-reset process runs until completion, and the printer returns to the ready state.

Network reset A network reset changes all network system parameters in NVRAM to the factory defaults. During the network-reset process, all button presses are ignored.
Use the following procedure to perform a network reset.
  1. Turn off the printer.
  2. Simultaneously Press and hold the Go and Job Cancel buttons.
  3. Turn on the printer and continue to hold the Go and Job Cancel buttons for approximately 10 seconds, but no longer than 20 seconds. During this process, the Attention light turns on.
  4. Release the Go and Job Cancel buttons. The Attention , Ready , and Go lights begin cycling from front to back. After the network-reset process is complete, the device returns to the ready state.
    If the Attention and Ready lights illuminate before you release the Job Cancel button, start again at step 1.

Now connect the netowrk cable and wait for 5-mins. After that print a configuration page and confirm the IP address.

- Nikhil

Jul 09, 2008 | HP LaserJet P2015dn Printer

Not finding what you are looking for?
HP LaserJet P2015dn Printer Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...