Question about Ovens

1 Answer

Mabe oven Hi, i have a mabe oven and am told i need to buy a 110V bake element, but aren't all oven bake elements 220V-240V? Do they have a 110V bake element?Thanks.

Posted by on

  • marsha568 May 11, 2010

    MABE # correction. IO55OOHI

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, well i have researched the mabe oven problem and it turns out that mabe used to make a 110V oven bake element for the ovens made in Mexico. However it appears that they no longer make that model oven and it's parts. Isn't that just golly gee terriffic!I am still searching for an element for it as GE who is also a share holder about 42% worth also has parts that sometimes will fit the Mabe made in Mexico, and not to be left out of the programe Camco is also part of the GE Mabe family so they are also a source to check with, and yes even whirlpool who is nothing to do with any of those other than a competitor sometimes has parts that will fit the Mabe made in Mexico. I'm not saying it will be a perfect fit but if it works, it works, but i'm not recomending you do it to a customers appliance at least not without asking if it's ok.

Posted on Feb 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire wall oven


Nino,

Does the unit have enough power to run (220V), also above you only mentioned convection? So is this the only cycle you have issues with? So, bake and broil work fine? The reasons for the question are they function work together for preheat. If all you elements are having issue, then check source of power to element and relay power up at board for the issue. Did this issue start after a cycle (self clean)? Check breaker for 220V, check supply to oven 220V, check power from relay / clock for 220V. If all this is good, check the elements for 220V (use caution when doing this). Get me more information and we can solve this, I seek to locate the problem by looking for power or lack of.

I am under the assumption you understand electricity and how to work with it. If not, please seek a service person to preform these tests or repair.

Look forward in hearing back from you on the progress.

Dec 16, 2013 | Ovens

2 Answers

No heat in either oven



contact_top_bar.gif contact_logo.gif
DCS by Fisher & Paykel
5900 Skylab Road
Huntington Beach, CA 92647 spacer.gif contact_general.gif spacer.gif 888.936.7872
949.790.8900 spacer.gif contact_tech_support.gif spacer.gif 888.936.7872 spacer.gif contact_service_parts.gif spacer.gif 888.936.7872 spacer.gif spacer.gif contact_tech_questions.gif techsupport@dcsappliances.com spacer.gif

Jan 13, 2008 | DCS (WOTD-227) Double Oven

1 Answer

Maytag electric oven model cwe5800acb. The lower element in the upper oven will not heat up. Can the lower element be replaced without removing the oven from the wall.


Yes, replace the lower element by first turning off the circuit breaker to the oven (110V is still to half of the 220V element circuit even though the oven setting is turned off), then unscrew the two screws holding the element to the back wall of the oven, then pull the element out (may have to tug it a bit to get the connectors through the insulation), and pull the wire connector clips off the element.

Mar 14, 2011 | Maytag CWE5800A Electric Double Oven

1 Answer

Will not heat up past 200 bottom element is brand new?


Hello- It sounds like it is not getting 220V. I would first check the breaker and reset it a couple of times to make sure that it is sending 220V to the oven. There could be a problem with the relay board not sending enough voltage to the element. I would also check to see if the convection element is ok, it may share a common 120V wire with the bake element. If you are unsure about testing the elements then I would call a Tech out to test the voltage. The oven may have to be pulled to determine if there are any shorted wires. Good luck and best regards.

Sep 28, 2010 | Jenn-Air 27 in. Electric Single Wall Oven...

1 Answer

Dual Oven - upper oven bake element replaced but no heat from it


Usually no internal fuses, and most of the time the controller is rated for fault interupt current.... age will degrade them though...

How did you change the element without pulling out the stove? is it a 'click/plug' in? might be that the socket is messed up...

You should not have to disassemble the cabinet, should just be a few screws and the unit slides out... sometimes hidden behind small movable pannels..

Peace

Feb 27, 2010 | Ovens

1 Answer

Hi, I cannot get the oven element or the back left burner to heat up.I found a blown 15 amp fuse blown in the oven and replaced it but still no power to the two elements. I took out the oven element to...


I take it when you mention burners you are refering to electrical hot plates?

If you have tested with 110V --even nthough it should be 240V then I can assume that the hob is working.

Possible cause is the regulator.

Regards

Aardvark Repairs

Nov 16, 2009 | GE Ovens

1 Answer

No volage at element posts.


your missing one 120volt leg,check your fuse/breaker panel then again at input terminals at unit and make sure you have a good neutral connection

Jun 19, 2009 | Ovens

1 Answer

OLD GE Wall Oven doesn't heat properly


On these older ovens ther is usually always 120 volts on the elements at all times.
If you check across the element ends with it in bake you should read 240V. If not, there is a problem with the control. With the voltage drop you describe, it sounds like you are losing power on one line of voltage coming to the element.
Post back to let me know what you find out or if you have any questions.

Nov 24, 2007 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...