Question about Whirlpool WGD9500T / WGD9500TC / WGD9500TW Gas Dryer

1 Answer

Installed a new whirlpool gas dryer. no heat.

Installed a new whirlpool gas dryer. appears to run fine except no heat. any thoughts?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 127 Answers

Well being "new" I'd not suspect many parts being defective other than the ignitor for the gas burner. You can view its operation behind the kick panel below the door. It should glow brightly when your dryer is calling for ignition. It may have been damaged if you had dropped it or very roughly handled your dryer wrestling it into position.
Otherwise i'd suspect that the gas line is still turned off, or a wire loose somewhere, or the heat setting in "air fluff"..
best of luck, and have fun,
ttfn

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dryer is working fine, except no heat. I would like to be able to fix this myself if possible


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.



if you dryer is gas check out this gas no heat tip....



If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.



check out this electric no heat tip...


heatman101

Dec 03, 2010 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

I have a LEN3434AWO Whirlpool dryer. Everything is working fine except there is no heat. Please help! Thanks!


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Nov 23, 2010 | Whirlpool GEW9250 Electric Dryer

1 Answer

Dryer quit heating runs fine it is a gas dryer


Is the pilot light or "stricker" working when you start the unit.. Is it getting good supply of gas?

Mar 12, 2010 | Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft....

1 Answer

New Whirlpool Duet gas dryer (wgd9300vu) won't heat.


if its brand new,
anmd its gas, well then more than likely it was dropped, when it was dropped the graphite ignitor craked or broke due to shock impact,
i delivered units for 5 years and saw this numerous times.
I would tell you to fix it your self, but its brand new, if the company you bought it from has service they should give you a free service call and part

Oct 21, 2009 | Dryers

1 Answer

Whirlpool dryer model LGQ80000JQ4 starts to heat and runs then stops heating, but rest of dryer seems to run fine


Hello, This problem is going to be your safety valve coils...basically they get old and over time of heating then cooling develop a short when they heat up...It may appear the gas lights to start but then goes out until the safety valve coils cool back down. Here is a picture of the coils 57d5263.jpgThis The coils are mounted to the gas safety valve, This should solve your problem. Hope this helps, Please feel free to comment again if you have any further questions or concerns. Good Luck! Mike

Sep 18, 2009 | Whirlpool LGQ8000JQ Gas Dryer

1 Answer

I have a Whirlpool LGB6000KQ1 Gas Dryer. It


Hello, Unfortunatly your wrong on all 3 counts sorry :) This problem is going to be your safety valve coils...basically they get old and over time of heating then cooling develop a short when they heat up...It may appear the gas lights to start but then goes out until the safety valve coils cool back down. Here is a picture of the coils 57d5263.jpgThis The coils are mounted to the gas safty valve, This should solve your problem. Hope this helps, Please feel free to comment again if you have any further questions or concerns. Good Luck! Mike

Sep 09, 2009 | Whirlpool LGB6000KQ Gas Dryer

1 Answer

Whirlpool accue temp dryer gets hot then heat shuts off


Sound like you need a new agnitor for your dryer take the model # to order part and install very carfully good luck

May 09, 2009 | Whirlpool LGQ8000JQ Gas Dryer

2 Answers

The unit runs but no heat.


Your limit switch has tripped. You will find this small switch near the burner that is the size of a dime. Press the small button between the wires firmly to reset it.

Apr 16, 2009 | Dryers

1 Answer

Whirlpool gas dryer wont heat up


Hi!!! you seem to have a problem with the coil boosters..located above the gas valve..Its shown here .Good luckk..8035205.jpg

Jan 21, 2009 | Whirlpool LGR6636 Gas Dryer

Not finding what you are looking for?
Whirlpool WGD9500T / WGD9500TC / WGD9500TW Gas Dryer Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...