Question about Husqvarna Huskylock Computerized 905

Open Question

Need help with setting up for flatlock for Viking 905 serger

Need help with setting up for flatlock

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: my viking serger 905 wont cut

Sometimes the blades need to be adjusted. Lower them all the way manually to the bottom. The cutters if you look on the side should meet. If they don't' meet or if there is a small space then the upper cutter needs to be lowered.
There are screws that hold this in place. You might need a man to help since the screws on my machine are very tight!

Posted on Apr 10, 2009

Ad
  • 11 Answers

SOURCE: user guide Overlocker/serger Husquvarna Viking Huskylock 905

Hey if you need a new manual go to this link www.ifixmachines.com and dont forget to put this code (150t) so you can get $1.50 discount. Hope this help.. By the way the manual cost only $10. BYE

Posted on Jul 24, 2009

  • 371 Answers

SOURCE: I need to know how to thread my Viking Husqvarna

You have a great machine. These are hard to thread but once you have mastered it, you'll have many years of great use. The owner's manual has instructions, as well as the inside door of the machine (the door that folds down on the front bottom part of the machine. However, you might want to follow-up with your local authorized Husqvarna Viking dealer. Most are eager to help you even if you didn't purchase the machine from them. Some even have classes on using the serger. You might try several stores in the area. Suggest that it be serviced and cleaned by an authorized Husqvarna Viking Dealer. You can find the nearest dealer by click on the "Dealer" link at http://www.husqvarnaviking.com

Good luck.

One fundamental tip is to follow the color coding, start with green, then blue/navy, then red, and finally yellow. The sequence is work inside to outside with threading (green - blue - red - yellow). Do not try different order--especially with green and blue -- since the threads build on each other. I have switched yellow and red with no impact but green then blue is always the proper order.

Good luck.

Posted on Feb 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to thread my Viking Husqvarna Huskylock 905/910 This is a serger sewing machine and very difficult to thread. I have had this machine for quite a while and have not had the opportunity...


You have a great machine. These are hard to thread but once you have mastered it, you'll have many years of great use. The owner's manual has instructions, as well as the inside door of the machine (the door that folds down on the front bottom part of the machine. However, you might want to follow-up with your local authorized Husqvarna Viking dealer. Most are eager to help you even if you didn't purchase the machine from them. Some even have classes on using the serger. You might try several stores in the area. Suggest that it be serviced and cleaned by an authorized Husqvarna Viking Dealer. You can find the nearest dealer by click on the "Dealer" link at http://www.husqvarnaviking.com

Good luck.

One fundamental tip is to follow the color coding, start with green, then blue/navy, then red, and finally yellow. The sequence is work inside to outside with threading (green - blue - red - yellow). Do not try different order--especially with green and blue -- since the threads build on each other. I have switched yellow and red with no impact but green then blue is always the proper order.

Good luck.

Jan 20, 2010 | Husqvarna Viking 1

1 Answer

I have a Huskylock 905 serger and all of a sudden it won't create a loop. I'm 99% sure that I have it threaded correctly. Any thoughts on what might have gone wrong?


Rethread. If still not working the loopers are out of adjustment. You might want to take it to an authorized husqvarna viking dealer for service. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com

Good luck.

Dec 25, 2009 | Husqvarna Huskylock Computerized 905

1 Answer

User guide Overlocker/serger Husquvarna Viking Huskylock 905


Hey if you need a new manual go to this link www.ifixmachines.com and dont forget to put this code (150t) so you can get $1.50 discount. Hope this help.. By the way the manual cost only $10. BYE

Jul 24, 2009 | Husqvarna Huskylock Computerized 905

1 Answer

Need to find compatible presser feet for Huskylock 700


Sorry, not familiar with the Huskylock 700. Suggest you visit authorized husqvarna viking dealer. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.

Feb 28, 2009 | Husqvarna Huskylock Computerized 905

1 Answer

Need to find compatible presser feet for Huskylock 700


Not really sure but would suggest contacting an authorized husqvarna viking dealer. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.

Dec 27, 2008 | Husqvarna Huskylock Computerized 905

1 Answer

My viking serger 905 wont cut


Sometimes the blades need to be adjusted. Lower them all the way manually to the bottom. The cutters if you look on the side should meet. If they don't' meet or if there is a small space then the upper cutter needs to be lowered.
There are screws that hold this in place. You might need a man to help since the screws on my machine are very tight!

Nov 05, 2008 | Husqvarna Viking 1

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...