Question about Pyle CAR AMP 4 X 500W MOSFET Car Audio Amplifier

1 Answer

Bluetooth microphone is it in the radio

I can hear poeple talking to me but they cant hear me on my cellphone

Posted by on

  • 1 more comment 
  • kenheaton Mar 07, 2008

    phone is a nokia n95 and the car radio is a pioneer deh p40mp mosfet 50w x 4 +wma np3 thanks ken heaton

  • kenheaton Mar 07, 2008

    sorry i dont know have just bought the car and the radio was in it of course there was no car radio manual so am stuck.thanks

  • Tygh Duval
    Tygh Duval May 11, 2010

    What phone and radio do you have?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 290 Answers

From what I can tell, the radio doesn't have Bluetooth built-in. If the optional Bluetooth module is also installed, I believe the microphone is a separate wired mic that gets routed to somewhere near the front. Either way, the mic isn't in the radio. If your having trouble with your voice being heard, you may have to trace the mic cable from the Bluetooth module and make sure the connection is good and the wire hasn't broken. I'm afraid that's the best I can do with the info I have!

Posted on Mar 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Owners manual


car amps are not bluetoothable

Jun 04, 2015 | Car Amplifiers

1 Answer

How do you restablish connection bwtween the rms 300A and the remote sensor?


300 rmsa is an stereo output term ie stereo outputs 300 RMS.Is this a car amp?remote control for it is presynced,so just needs batteries.Or are you talking bluetooth?

Feb 17, 2015 | Car Amplifiers

1 Answer

I cant make a connection to my headphones (bluetooth remote),from the loud speaker.


Well this could mean there incompatible ,,, what i do is try to connect it to another Bluetooth device and see what happens

Nov 26, 2014 | Car Amplifiers

1 Answer

I'm attempting to install a pioneer stereo into my son's 74 Chevy pickup.


it plugs in to the the plugs you unpluged from the original radio if there are no plugs then your going to have to wire it all up from scratch new power wires new speaker wires and just alot of work so I hope you didn't cut the plug off the old radio

Mar 21, 2013 | Pioneer DEH-X6500BT MP3/USB A2DP Bluetooth...

1 Answer

I just installed my Pioneer DEH-X6500BT for my 2004 Subaru Outback. However, the radio reception is very poor. The radio sounds very staticky


I suspect that the antenna connection is not completely connected. If an adapter was necessary, check that as well. Good luck!

Jan 20, 2013 | Pioneer DEH-X6500BT MP3/USB A2DP Bluetooth...

1 Answer

Storing memory on the sony xplode stereo


Make sure the yellow 12V Constant is connected to a wire with a direct connection to the battery. This retains your memory.

Feb 02, 2009 | Sony Xplod XM-554ZR Car Audio Amplifier

1 Answer

Auxilary wont work on my alpine cda 9884


you need to go int he teupmode of the radio
turn off the cd changer option and turn on the aux mode

good luck

Jan 19, 2009 | Hifonics Eagle Car Audio Amplifier

1 Answer

Need help


If your radio and phone are synced up together, it probably muted the radio when the call came in then didn't un-mute. I'd try to reset the radio (disconnect the power for maybe 10 minutes) and try it then.

Oct 07, 2008 | Jl Audio 1000/1 Car Audio Amplifier

1 Answer

Jl; audio 500 amp


I assume the signal sensing switch you are talking about is the remote turn on for the amp. The amp should turn on when you turn your radio on, not your truck.
First try disconnecting the remote turn on that comes from your radio. After that is removed turn your radio on and them run a jumper wire from the positive voltage terminal of the amp ( the main power input) to the remote turn on terminal of the amp. If the amp turns on and you hear music, you have a problem with the remote turn on from the radio. If the amp turns on but you hear no music you have a problem with the audio input of the amp or the wiring of the speakers. if the amp does not turn on you have a problem with the amp.
I think you may have a problem with the remote turn on output of your radio. if so, you need to get the radio looked at by a service technician.
If the amp is turning on sometimes, you may just have a loose wire or faulty ground. Double check all the wiring.

Mar 18, 2008 | Jl Audio 500/1 Car Audio Amplifier

Not finding what you are looking for?
Car Amplifiers Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pyle Car Amplifiers Experts

The Knight
The Knight

Level 3 Expert

68209 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Are you a Pyle Car Amplifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...