Question about RCA R52WM24 52" HDTV Projection Television

1 Answer

Double vision pretty much

Is there a way to do any adjustments from the remote we could not figure it out we pretty much have double vision if the name of the channel is for example hallmark and its in white ant bottom of screen it will also be in red and bottom of screen help

Posted by on

  • Anonymous Feb 18, 2008

    same model - double vision - just over 1 year old?

  • BnSd Mar 01, 2008

    Just out of the blue we have double vision that looks like it could be in 3D. How do we fix it?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,030 Answers

This problem from what you are describing is a convergence issue the customer menu has a option that might help set convergence. if that doesent work a technician may have be called to adjust convergence or see what part has failed in the convergence cuicit

Posted on Mar 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tmtmail.co.ukmy samsung projection tv has double vision and i dont know how to amend the lens can yu please help thank you


double vision in a rear projection tv has several reasons. one is convergence magnets are out of tune. u need to tune them which is back side of picture tubes. u please observe that which color is producing the double vision. the lens are firmly fixed & therefore need not to adjust. other option is to adjust the convergence of tv by going to service mode by remote.

Sep 13, 2011 | Samsung Projection Televisions

1 Answer

Picture showing up blurred (double vision) with alot of red in the picture as well


Try to adjust the convergence setting in your remote, if still does not work replace your convergence ic it has a print STK followed by a numbers it is located in your main board.

Oct 26, 2010 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Double vision..


Adjust the convergence in the menu. If it will not adjust then solder connections on convergence ics or ics themselves need replaced.

Apr 26, 2009 | Projection Televisions

1 Answer

Blury ,double vision, and cant brighten up


Solution:

Your TV has a convergence problem. Here are some of the most common symptoms.

Screen looks 3D
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed in or warped.

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence or magic focus section.

Try to adjust the convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

Its a fairly easy fix on the Hitachi sets.

You can get a repair kit that includes all the parts from www.TvRepairKits.com. The kit includes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc.
Everything you need to fix it yourself.

Jan 29, 2009 | Projection Televisions

1 Answer

Double vision on my Mitsubishi 46 inch width screen--TV is 5 years old


any repair shop can re converge the tv for you.id do some calling arond and get a few quotes to see what it would cost to have them come to you

Oct 09, 2008 | Mitsubishi WS-55513 55" Rear Projection...

3 Answers

Double Vision....


the problem on my sony projection tv is double vision,what equipment i need and how much it is. also is it easy to fix on my own?

Mar 08, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Double- Vision


More than likely your akai has defective stk392-040 Convergence chips . it also may have open resistors generally 3.9 ohm flame proff. this board is attached to the top left looking from the back of the set it is screwed on by 1 screw black in the center . after installation this will probably half to be converged dinamically. which means you will half to get to the grid this is done by using the remote press mute 183 quicly to enter numbers on thew remote 2 to adjust red 4 to adjust blue horizonta 6 to adjustred vertical and 8 to adjust red vertical using center button to go up and down

Feb 20, 2008 | Akai PT4298HD Rear Projection Television

1 Answer

Double vision


I recomand change convergence output IC

Dec 07, 2007 | Toshiba 57H81 57" Rear Projection...

Not finding what you are looking for?
RCA R52WM24 52" HDTV Projection Television Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...