- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had a similar problem with my DVD player. Cleaning the laser eye helped fix my problem. You can clean it manually if you are not afraid to remove the cover of the unit or you can try a cleaning disc. The eye can collect dust and prevent it from reading the ID sector of the music CD.
The recorder was switched off/unplugged after recording without ejecting the disc. The recorder could not write essential recording information onto the disc.
While REPAIR is displayed, the recorder automatically examines the recorded area of the disc and updates the track numbers and recording time data. This process takes about 40 minutes for a fully recorded disc. Finalization or further recording is possible once the REPAIR message disappears.
1. press the menu/set button on component to select display mode 2. use the +/- button to set the time mode (AM 12:00 blinks) 3. press the menu/set button for at least 2 seconds (the hour will start blinking) 4. Use the +/- button to set the hour, must roll the hour to change am/pm 5. press the menu/set button to switch to minutes 6. use the +/- button to set minutes 7. press the menu/set button to finish setting the time
this player uses a philips mechanism, spindle motor failure is very common on these mechanisms, yours may be on its way out. take the lid off and insert a cd and if you can hear the laser trying to read the cd without it spinning, it's definately the spindle motor.
Receaving display blinks (check disk) sometimes cd will read but after about one minut the cd eather stops or skips. I tryed to clean the cd player with T'nB cleaning cd but did not solve the problem. Can you help me?