Question about Dmm Vision Fitness T9500 Treadmill
Vision fitness t9500 squeals on startup for about 1 minute then goes away
Remove motor shroud and inspect the drive belt VF is imfamous for squealing drive belts better to call them and order a new belt here is their # 1-800-335 4348 Vision is now under there parent corp. name Johnson
Posted on Feb 28, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Note: the following table contains approximate full-load currents for motors of various types, speeds, and frequencies. Variations of ±10% may be expected.
Current - Full-Load (Amperes)
Oct 06, 2015 | Vision Fitness Exercise & Fitness
Aug 23, 2013 | Vision Fitness Vision T9500 Deluxe...
Dec 16, 2011 | Vision Fitness T9500 Treadmill
With the safety key in place, turn the treadmill ON . Press and hold SELECT. Now you can perform auto-calibration by pressing START.
(The treadmill will run through minimum and maximum speed and elevation. This will take 3 to 5 minutes. Let the treadmill perform this complete function. "END" will appear when auto-calibration is complete. When auto-calibration is complete, it will take about 30 seconds for the treadmill to reboot and return to the start-up screen)
If it doesn't help then the motor control module is faulty. You have to replace or repair the motor control module.
Aug 27, 2011 | Dmm Vision Fitness T9500 Treadmill
Apr 08, 2011 | Dmm Vision Fitness T9500 Treadmill
Jan 07, 2011 | Dmm Vision Fitness T9500 Treadmill
Jun 15, 2010 | Dmm Vision Fitness T9500 Treadmill
Feb 13, 2010 | Dmm Vision Fitness T9500 Treadmill
397 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: