Question about Rosen Clearvue II CV6820D Car DVD Player
I have programmed my radio to the fm station recommended in the manual and I still cant receive any sound either over the speakers or if i plug in headphones. Any recommendations? I bought used from Toyota car lot not sure if they can help.
The problem could be that the outputs in the stereo are faulted. Did you get a warranty when you bought the stereo?, if not you may want to take it to a repair shop and ask for a diaognosis.
Posted on Feb 01, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 07, 2015 | Technics Audio Players & Recorders
Apr 30, 2014 | Cars & Trucks
Nov 18, 2013 | Audio Players & Recorders
Nov 11, 2011 | Sony ICFSW7600GR FM Stereo World Band...
Jun 29, 2011 | Audio Players & Recorders
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press (PRESET).
The Preset screen is displayed.
3 Rotate the Double Action encoder to select the
4 Press and hold /ENTER for at least 2 seconds.
The selected station is stored.
The display shows the band, preset number and station
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
• Press in the outer ring and rotate the Double Action encoder to the
left or right on the Preset screen, you can switch the Preset screen of
FM-1 FM-2 AM FM-1
You can also change the desired radio band by pressing BAND.
Hope this helps.
Feb 25, 2011 | Alpine iDAX305 MP3USB Car Radio Car CD...
Using the tuner
Listening to the radio
The following steps show you how to tune in to FM and
AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the
frequency of the station you want, see Tuning directly to a
station below. Once you are tuned to a station you can
memorize the frequency for recall later-see Saving
station presets below for more on how to do this.
1 Press the FM/AM button to select the tuner.
2 Use the FM/AM button to change the band (FM or
AM), if necessary.
Each press switches the band between FM and AM.
3 Tune to a station.
There are three ways to do this:
To search for stations in the currently selected band,
press and hold TUNE ?©/?? for about a second. The
receiver will start searching for the next station,
stopping when it has found one. Repeat to search for
To change the frequency one step at a time, press
High speed tuning
Press and hold TUNE ?©/?? for high speed tuning.
Release the button at the frequency you want.
Improving FM stereo sound
If the TUNED or STEREO indicators don't light when
tuning to an FM station because the signal is weak, press
the MPX button to switch the receiver into mono
reception mode. This should improve the sound quality
and allow you to enjoy the broadcast.
Using Neural THX
This feature uses Neural Surround™, THX® technology to
achieve optimal surround sound from FM radio.
• While listening to FM radio, press AUTO/DIRECT for
Neural THX listening.
Dec 23, 2010 | Pioneer VSX-07TX Receiver
Jan 05, 2010 | Car Audio & Video
Apr 28, 2009 | Denon DRA-375RD Receiver
416 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: