Question about Xact Communication XG2200 Cordless Phone

3 Answers

GE 900mhz model 26936GE2-C

I get no link to base when I try to use the handset.When I first remove from base,I get readythen when I push talk button,I get no link to base-Also no dial tone on handset---Base works good.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My problem is still the same.I didn´t droop it, anda a have already changed the battery, but the fone doesn´t accept the base.

Posted on Mar 02, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Set the unit on the main base for atleast one minute to reregister it to the base.

Posted on Feb 19, 2008

Ad

Sounds like a defective battery or low battery.
1. Have you replaced the battery?
2. Have you changed the channel?
3. Have you dropped it?
Answer these few questions and we'll see if we can figure it out.
Let me know.

Posted on Feb 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My uniden DSS7855 with 1 base station and 3 handsets wont connect when i dial a number and hit the talk button it tries to connect and then comes up "'out of range" much appreciated for any help...


Clear the Handset's Base Data
  1. To remove the base data from a handset when out of range of the base, press and hold the 'end' button and the '#' button simultaneously until the phone beeps.
  2. It will now be de-registered from the base.
Note: This requires that the base and handset can communicate with each other.


Clear the Base Handset Data
  1. To de-register all handsets from the base, remove power to the base, and remove the handset from the base.
  2. Press and hold the 'flash/find hs' button while applying power.
  3. Wait for the beep and release the button.
  4. The charge light will now flash.
  5. Sit any handset in the cradle.
  6. When the flashing stops, re-register the handsets to the base.
Re-Register a Handset to the Base
1. Remove Handset Battery.
2. Reconnect battery while holding down "*" and "#" key.
3. Then press the right upper key under the LCD.
4. Press the "End" key.
5. Wait a few seconds and then the phone will be ready to register to the base.

Nov 12, 2010 | Uniden Lands Phones

1 Answer

I have a panasonic cordless phone, model kx-tga820. for some reason both handsets now say that it is busy when i push the talk button. Our other phones are ok. Why?


Hi,

If you get busy tone in your Panasonic KX-TGA820 cordless phone, it may be due to any one of the following reasons:

1)The called handset is in use.

2)The handset you are calling is too far from the base unit.
Check whether the base unit is not so far from the handset

3)There is no handset registered to the base unit matching the extension number you entered.
Try to re-register the handset to the base unit again, To know details regarding registering and re-registering, please refer page 38 of the manual, which you can download from the link given below

4)Other units are in use and the system is busy. Try again later.
Try to check whether the other units are not using your base unit

You can download manual for your phone from the following link for reference
http://service.us.panasonic.com/OPERMANPDF/KXTG8231.PDF

Please rate this solution
Rnj VINODKUMAR

Nov 10, 2009 | Panasonic Lands Phones

1 Answer

Uniden XS 1210 cordless phone won't connect to base unit


try connecting both phones via the base that is working and see if they recognize each other. Let me know if that works.

Jul 21, 2009 | Uniden Cordless Phone

2 Answers

No link to base.


unplug the base and when you plug it back in
the handset should work

Dec 13, 2008 | Panasonic KX-TG2356 Cordless Phone

2 Answers

Model#kx-tg6071b when talk button is pushed, screen shows" no link to base move closer, try again". That is what appears on both handsets.


Press MENU, scroll down to INITIAL SETTINGS (press select), scroll down to REGISTRATION (press select), then select HS REGISTRATION, and follow the instructions on the handset screen. This is for the KX-TG6071B, but is similar for most Panasonic Cordless phones. That will link the handset to the base, and YOU MUST DO IT WITH EACH HANDSET.

Jun 22, 2008 | Panasonic KX-TG2313 Cordless Phone

1 Answer

GE 900mhz model 26936GE2-C


HI NEED HELP MY PHONE IS SAY NO LINK TO BASE

May 20, 2008 | Lands Phones

1 Answer

Handset


Presume you are talking about the extra handset. Try placing the extra handset in the "main" base for 5 seconds.

Aug 27, 2007 | Sony SPP N1025 Cordless Phone (spp-n1025)

2 Answers

Couldn't make any calls


You might try unplugging the base AND removing the batteries from the handset for 30 minutes. Then reinsert the batteries, place the handset in the cradle in the base, and then plug the base back in. This might allow the handset and the base to re-sync with each other.

Mar 15, 2007 | Panasonic KX-TG2740S Digital Answering...

1 Answer

Handset ?No Link To Base? error and no dial tone


2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.

Jan 14, 2007 | Xact Communication XG2200 Cordless Phone

1 Answer

Handset Buttons Stopped Working - Full Battery


Here is a link to Uniden's site, and on the right side of the page, there is a link for a download manual pdf and helpline
http://www.uniden.com/products/productdetail.cfm?product=TRU8885-2

also worth checking if any buttons are stuck, or if the handset is set to pulse rather than tone mode, or if it has had a tumble or knock, possibly the keypad connector has come loose .

Hope this helps.

Sep 17, 2006 | Uniden TRU8885-2 Cordless Phone

Not finding what you are looking for?
Xact Communication XG2200 Cordless Phone Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xact Communication Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Xact Communication Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...