Question about Cell Phones

1 Answer

I have a two line cordless phone with two ex- tentions. When I try to get a dial tone, it comes on in about ten beeps and then I get the long tone. Tried new batteries but they did not correct the problem. The phone is at least five years old. Does it need to be replace or can it be fixed? Doris Emanuel DEmanuel@prapa.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,278 Answers

Hello, Doris.

Give this a try:

Disconnect all phones from the power and telephone line. Wait 15 minutes and reconnect the line again, one at a time for multiple phones on the same line.

If the same problem occurs with more than one phone, contact your telephone system provider.

Hope this helps.

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone not working


Hi Pam,
Try these..1...remove your telephone line from base unit and fix it into a working land phone and check whether is it having normal dial tone.If it's having engage tone(beep beep...)remove paralleled phones and re connect to cordless base unit.
2.If line is ok (normal dial tone with full volume) & still display indicates line is busy, your main base unit must be having faulty components inside.Commonly these defects happen in thundering or surges through telephone lines.You have to take full set to a repair shop.
Rana.

Dec 28, 2013 | Gigaset As300 Twin Dect Cordless Phone -...

2 Answers

Has new battery, but no dial-tone,


Replacing the battery reset the phone to the factory defaults, which means you'll have to restore the connection to the base in Menu-Setup

***Don't forget to VOTE for the guys who take an interest in helping!

Apr 19, 2010 | Uniden Cordless Phone

1 Answer

When I get ready to dial, phone beeps 3 times


You must have an answering service from your phone company, and probably don't know about it. Try dialing your own # and wait for the prompts.

May 24, 2009 | Uniden 5.8GHz Dual Cordless Phone

1 Answer

No dial tone


Please disconnect your cordless phones from telephone jacks throughout the home. The "line in use" is say that you have a short on the line, or a phone off the hook. So disconnect lines, then replug 1 corded phone in to check for dial tone. If working, continue to plug in 1 phone at a time(rechecking working one each time) to find the equipment that is causing you heartache.

Apr 21, 2009 | Uniden Cordless Phone

1 Answer

No dial tone in Clarity C4230 setup


if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.

Apr 16, 2009 | Clarity C4230 Cordless Phone

1 Answer

How to set up Speed Dial on a Uniden phone?


My Mom had this same problem.   I found these instructions on Uniden's website (uniden.com) under the "Owner Manuel" section.


Here you go - good luck!








Using the Speed Dial Memory 
Storing Numbers in Speed Dial Memory 
Your cordless phone can store up to ten numbers (up to 20 digits each) in the speed dial 
memory. To store number in memory: 
1) When the phone is in standby, press [memory]. The talk/batt low LED flashes. 
2) Use the keypad to enter the phone number. 
 (To enter a 2-second pause between numbers, press [redial/ 
pause]. Each pause counts as a digit. ) 
3) Press [memory] again. 
4) Select the speed dial location where you would like to store the 
number ( [0] to [9] ). You will hear a confirmation tone indicating 
that the number has been stored. 
NOTE: 
• Storing a number to a speed dial location will 
overwrite the any previously stored number without 
warning. 
• When storing numbers into memory and the handset is idle (i.e., no key is 
pressed) for more than 0 seconds, it will beep rapidly, and then the phone 
will return to standby. 
Dialing a Stored Number 
1) When the phone is in standby, press [talk], and listen for a dial tone. 
2) Press [memory] and enter the speed dial entry ([0] – [9]) that has the stored number 
you want to dial. (If you enter a digit that does not contain a stored number, the 
handset will beep rapidly, and the phone will not dial.) 
Chain Dialing 
The speed dial memory is not limited to phone numbers. You can store any number (up 
to 20 digits) that you need to enter once your call connects. This is referred to as Chain 
Dialing. An example is a frequently refilled prescription number. Store your pharmacy 
phone number in one speed dial and your most frequently refilled prescription number 
as another speed dial. To use, once you ring your pharmacy's automated prescription 
line, simply press [memory] and the speed dial number where you stored your account 
number. 
Erasing a Stored Number from Memory 
1) With the phone in standby, press [memory] twice. 
2) Press the number of the speed dial entry. A tone indicates that the stored number is 
erased from memory. 

Jan 11, 2009 | Uniden Cordless Phone

1 Answer

Phone Not Working


I have had the same problem before and now again for the last week...I finally remembered what I did last time to solve it!

I put my "unavailable" Handset into the main cradle and left it there for a slow count of 20. That has reset the unavailable handset and returned the dial tone etc.

Maddening isnt' it!

May 06, 2008 | GE 25932 Twin Cordless Phone

1 Answer

BT Freestyle 2200 do dial tone


I have this model of handset but as a triple. I get three beeps from the handsets if the batteries are low or flat.
Are your phones getting charged?

However,

Try putting the base station into a different phone line/ socket if you have one.

if not - Try putting a corded phone on your phone line. Maybe there is something faulty with the socket, maybe there is no dial tone due to faulty wires?

Mar 07, 2008 | British Telecom Freestyle 2200 Trio...

2 Answers

Radio shack phone c-4210


for my phone I hold down the flash key then the menu comes up and you can press * for tone or # for pulse. Hope it helps!

Dec 06, 2007 | GEH5450 Cordless Phone

4 Answers

Ge 900 MHz cordless phone set on rotary dialing


Lisa, If the 900MHZ phone is Model 26928M programming for rotary dial usually goes like below, can't hurt to try on any model. TONE/PULSE DIALING This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for touch-tone use. To set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You will hear a beep. 2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing. 3. Press the program button again. You will hear a confirmation tone.

Sep 29, 2007 | Uniden Cordless Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...