Question about Pioneer AVIC-Z2 Car DVD Player

1 Answer

I have a pioneer avic-z2 on my 08 camry

After I installed it , my screen didn't wana flip down all the way it started making a clanking noise only moving 1/4 inch . How can I fix this problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I had the same problem once. If you soldered a wire to your units wiring harness in order to bypass the nav/video under 15 mph rule then you used too much solder. The solder is on the contacts of the harness. If you didn't, then it's probably the door motor. It would **** if it was the door motor though. That requires you to get it serviced by someone who really knows what they are doing...

Posted on Feb 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen wont slide out on my Pioneer AVIC-N1


If the Avic was installed in a tight housing it will put pressure on the sliding mechanism for the screen. Its as if you put pressure down on the top of the housing, it wont slide out. These Avics and other players are sensitive to pressure, so tell an installer or someone with experience to relieve the pressure of the pioneer avic housing. If that doesnt do it then it is probably a mechanical problem or small electrical issue. Sometimes a faulty ground or weak power connection will cause this, but i am sure it has to do with pressure on the housing.

Good luck.

Mar 10, 2010 | Pioneer Car Audio & Video

1 Answer

AVIC N2 SCREEN , POWER ISSUES . NOT FLEX CABLE ISSUE


did you ever figure this out i have the same problem

Feb 23, 2010 | Pioneer AVIC-N2 Car DVD Player

1 Answer

Display jammed


Pioneer has a recall on the ribbon cable that controls the screen! Go to there website.

Jun 18, 2009 | Pioneer AVIC-N2 Car DVD Player

1 Answer

Pioneer n1 deck screen wont open


We can fix any problems with the AVIC at a very affordable rate. Please check out www.turbotunes.com for details.

-Steve

Mar 06, 2009 | Pioneer AVIC-N1 Car DVD Player

2 Answers

Avic-n3 screen will now open


We can fix this and all other AVIC N1 N2 N3 problems. Check us out for affordable AVIC Repair. www.turbotunes.com

-Steve

Dec 18, 2008 | Pioneer AVIC-N3 GPS Receiver

3 Answers

Display not working


just got a tech bulletin from pioneer in my bulk mail(almost trashed it). they said its a recall on all avicn1 and 2's. the ribbon wire going from unit to screen fails after many cycles. they are issuing free repair.

Notice: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 To: January 3, 2007 Dear Valued Customer: Re: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 We would like to inform you of a potential service issue with Pioneer's AVIC-N1 and AVIC-N2, inform you of our plans to resolve this service issue, and ask for your help in notifying consumers. If a consumer is not experiencing any issues currently, there is no need for the consumer to take immediate action because the one-time fix to resolve the service issue will be available if an AVIC-N1 and AVIC-N2 later experiences the service issue. _Importantly, the service issue does not pose any health or safety risk._ Pioneer is aware of a potential issue with the flex-cable powering the flip screen to the AVIC-N1 and the AVIC-N2. After a number of power cycles, the cable has been observed to fail and cause the unit to malfunction (symptoms may include, but are not limited to, the flip-screen becoming blank) -- flex-cable failure can only be confirmed by Pioneer; standard service charges may apply for service issues not related to the flex-cable upgrade. This issue may affect almost all AVIC-N1 units and AVIC-N2 units. Please contact Pioneer at the number listed below if you have a question about whether your AVIC-N1 or AVIC-N2 unit is affected by this issue, or if a specific malfunction affecting your AVCI-N1 or AVIC-N2 is related to this issue. To address this issue, Pioneer is providing a one-time cable upgrade to consumers for their AVIC-N1 and AVIC-N2 at no charge to consumers for parts and labor. Pioneer will offer the free upgrade either upon request or automatically if an affected unit is serviced for another reason. Pioneer will exclusively perform the free cable upgrade for all units (i.e., no other service facility should perform the cable upgrade). If you own an AVIC-N1 or AVIC-N2 and you are experiencing the service issue, please contact Pioneer Customer Service toll free at 800-421-1603 to arrange for the cable upgrade. Pioneer service representatives are available Monday through Friday, 9:00 a.m. to 7:30 p.m. (Eastern Time). Customers who have paid for the cable upgrade are eligible for reimbursement of certain service costs if sufficient proof of service can be provided -- please contact Pioneer at the above-listed phone number for more information regarding reimbursement rules. Customers can also review FAQs regarding this service issue. Click here to view the FAQs. We sincerely apologize for any inconvenience this service issue may cause you, and we thank you for your cooperation and continued support of Pioneer. Sincerely, Pioneer Electronics (USA) Inc. *Pioneer Electronics (USA) Inc., 2265 East 220th Street, Long Beach, CA 90810* ------------------------------------------------------------------------
___________________________________________
owner of
Motion Marine & Car Audio
the florida keys

Dec 08, 2008 | Pioneer AVIC-N1 In-Dash DVD Multimedia AV...

2 Answers

Pioneer avic n1 car stereo


You can adjust the levels in the setup menus...

Apr 23, 2008 | Pioneer AVIC-N1 Car DVD Player

2 Answers

Avic n1 dvd is not working properly


Is it always blank? Or only when trying to watch a DVD? What version discs are running?

Apr 08, 2008 | Pioneer AVIC-N1 Car DVD Player

3 Answers

AVIC-N1 opens to blanks screen and none of buttons work


It is probably the ribbon cable that you can see when the screen closes. This is a known problem and the part is sometimes hard to find. But is available.

Mar 26, 2008 | Pioneer AVIC-N1 Car DVD Player

Not finding what you are looking for?
Pioneer AVIC-Z2 Car DVD Player Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...