Question about Creative Labs Zen Micro MP3 Player

1 Answer

Disk doesn't work

My Zen Micro felt on the ground and now it won't to turn on. When I turn it on, display shows only Creative logo and disc produces strange noise. In the recovery mode, all buttons function expect up an down, so i can't move down to format the disc. When it's plugged into PC, it does the same as at switching on.
Is there a solution?
Lukas from KE

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

"Hard-disk Problem"... I'd just like to confirm once more that smacking the player on its rhs while turning it on works.I had to smack it fairly hard though so don't be afraid!! I didn't try smacking it till I checked out the threads above so thanks everyone I'm a happy man again!! :)
you can replace the hard drive with a flash drive to fix this.


Posted on Feb 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a m4500 creative speaker the problem is the volume switch when i turn it on the green light is on and when i increasing the volume the become dimmer until its off and no sound,what is cause?


It sounds like the output IC (the amplifer) has a problem.This needs to be replaced.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Mar 12, 2016 | Audio Players & Recorders

1 Answer

How do I test for a poor ground wire as opposed to a bad ground wire?


One tiny wire has very little resistance. Turn up your Ohm meter to it's highest setting. Be sure to have it calibrated exactly the same for each test (zeroed out). The very good connection should read infinite but the tiny connection should show a tiny bit of resistance. It's difficult but not impossible. Get a friend to help so the resistance in your body doesn't affect the data. Use one hand and new clips.

Jan 23, 2015 | Audio Players & Recorders

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

1 Answer

HMDX Jam wireless speaker cannot be paired with my computer


Go to your Bluetooth settings, go to the "Audio/Video" tab, under the "Content Protection" section uncheck the "Connect to content protection enabled headset only" and your bluetooth speaker(s) should now work.

hmdx-jam-wireless-speaker-cannot-paired-545ferrkqkuowltb2dothasu-3-0.jpg

Feb 02, 2013 | Audio Players & Recorders

3 Answers

Pioneer Model: DEH-P8400BH


Press and hold the source button until the CD Receiver turns off. Press and hold the center of the volume knob top bring up the settings menu rotate the volume knob until Clear memory is displayed and then press the center of the volume knob Clear memory YES will be displayed, press the center of the volume knob to confirm. The display will change from Clearing to Cleared

Aug 07, 2012 | Pioneer Deh-p8400bh Cd/mp3/ Receiver W/...

2 Answers

My ipod is just playing without the sound carrying through to the speakers. I dont know how to make it work?


Verify there is nothing plugged into the headset port, including headsets, headphones, or adapters.
Original iPhone only: While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris in the headset port:



To remove debris in the headset port, try connecting a pair of headphones to the headset port and then remove the headphones. Repeat this several times.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
If that doesn't work, try restarting the iPhone. Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
If restarting the iPhone doesn't resolve the issue, try restoring the device.

May 28, 2011 | Audio Players & Recorders

2 Answers

My s9 headphone not on of work tell me wath i do


make sure you charge the S9 using a motorola mini usb AC charger or a mini USB cord plugged into a live port.
press and hold the circle vertical bar until the light is steady blue and pair it with your bluetooth device. you only have two buttons at the rear of the device under the motorola logo.

Aug 28, 2010 | Motorola Mobility S9 Headphones

5 Answers

BOSe Wave Radio - Disk "not readable"


I had the same problem with the disk unreadable error and took my unit to a authorized repair dealer about 100 miles from where I live to have it fixed. It ended up costing me about $300 to have the CD unit totally replaced which is almost as much as I paid for the unit in the first place. I am like a lot of you that used the CD very little although the unit was about 3 years old. I think Bose has a problem and would like us to think it is very rare. I bought a Lifestyle surround system about 14 years ago that has a CD and have never had a problem with it so needless to say I am very disappointed in the Wave II Radio/CD system. I am fairly certain the problem will occur again, but only time will tell.

Mar 03, 2008 | Bose Wave Radio

Not finding what you are looking for?
Creative Labs Zen Micro MP3 Player Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Audio Players & Recorders Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

604 Answers

Are you a Creative Labs Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...