Question about Samsung Office Equipment & Supplies
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your printer looks like this:
Then you need to clean the developer blades. In the image above it is the black blade that need to be cleaned. If there are streaking on any other color, then they also needs to be cleaned.
To clean the developer blades, look to this link. http://losingambition.com/clp300imagefix/ It describes how to clean them. It only takes a few minutes to do once you get the developers out of the unit. Just be careful when you clean the edge of the blades. You need to make sure that the residue is completely removed from the edge. Also be sure that when you reinstall the blade that the little foam does not get trapped below the blade. Otherwise when you print the side where the blade is not properly installed will have too much color.
If you are afraid of messing your printer up, then you need to buy a new imaging unit. They go around $100.
Posted on Feb 27, 2009
it is possible that this is a fuser prob, fuser works applying heat and pressure, if the roller, either the pressure roller or the fuser roller is defective this is most likely will happen too, you might want to check the number of copies or prints made
Posted on Mar 22, 2009
You could try temporaily disabling the windows firewall, and any anti-virus firewalls to see if they are blocking communications to the scanner.
(Please rate my answer thanks :)
Posted on Jun 23, 2009
SOURCE: CLX-6200-FX LED: "
Your user manual can be found here:
Please look at troubleshooting starting on page 71 for paper jams.
Have I solved your problem? If so, please rate this. ty.
Posted on Feb 26, 2010
SOURCE: How involved is it to
I just bought a CLX-6200FX and it has holes in the transfer belt, so I think it's the reason I get poor color printouts. I just bought a belt (vs. an entire belt assembly) and am going to attempt to change it out. Any hints as to how to start would be appreciated.
Posted on Feb 21, 2011
Tips for a great answer:
Jul 23, 2013 | Samsung CLX-6200 Series
Apr 21, 2012 | Samsung CLX-6200FX Printer
Apr 21, 2012 | Samsung CLX 3160fn All-In-One Printer
Mar 04, 2011 | Brother Office Equipment & Supplies
Dec 01, 2010 | Samsung CLX-6200FX Printer
Aug 20, 2010 | Samsung ML-2850 Series
Feb 26, 2010 | Office Equipment & Supplies
Jun 23, 2009 | Samsung CLX 3160fn All-In-One Printer
May 05, 2009 | Samsung CLX 3160fn All-In-One Printer
282 people viewed this question
Usually answered in minutes!