Question about Office Equipment & Supplies

2 Answers

Canon s600 printer

Message reads ---a problem has occurred with the bj cartridge. what is a bj cartridge and how do i correct the problem?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 60 Answers

BJ cartridges are cartridges with higher capacity for your printer.
You should use the cartridges recommended in the following link:
http://www.castleink.com/search.php?brand=canon&tpl=22&catid=39&pg=16&model=S600&submit2.x=37&submit2.y=10
If the problem still there, let me know.

Posted on Feb 19, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 97 Answers

This problem occurs when you put the cartridge of printer incorrect. TRY TO REMOVE AND RETURN THE CARTRIDGE

Posted on Feb 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am using a canon bj 200ex bubble jet printer but recently it strated to leave out strips so that i cannot read the text properly, how can i adjust it?


The BJ200 is quite an old printer. The problem you're describing is indicative of a head failure. If replacing the cartridge doesn't work, you may have a faulty head. If the cartridge includes the print-head (some do) it could be the contact strip on the cartridge cradle.

My honest advice would be to retire this printer, and buy a new one. Even the most basic model you can buy now would exceed the bj200ex in both quality and speed - and would be inexpensive to buy.

Oct 30, 2013 | Canon BJ 200EX InkJet Printer

1 Answer

Will not print


Check on Canon.com, for the users manual, When you install cartridges you hold the resume button for the number of beeps to identify which cartridge is installed. You can install one black ink or one each black and color but you have to tell the printer which is installed.

Dec 28, 2009 | Canon BJC 85 InkJet Printer

1 Answer

My Canon s4500 not working, with 6 beeps error


This is because the BJ Cartridge is not installed. Please refer to your manual page 214.

Two beeps: Out of paper, or paper feed error
Three beeps: Paper jam
Four beeps: BJ Cartridge out of ink
Five beeps: Cartridge not installed correctly
Six beeps: BJ Cartridge not installed
Seven beeps: BJ Cartridge defective
Eight beeps: Waste ink tank almost full
Nine beeps: Automatic print head alignment failed
The POWER lamp flashes orange and green alternately with beeps: Service error

YBC (/\)

Oct 08, 2009 | Canon Office Equipment & Supplies

1 Answer

Canon bjc-3000 will not print


You said that the light blinks 7 times. It means that the BJ cartridge (printhead) is defective

Remove the BJ cartridge and check that the contacts on the cartridge and cartridge holder are clean. Make sure the orange protective cap and tape have been removed and reinstall the cartridge. If the error occurs again after you resume operation, you may need to replace the BJ cartridge.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Apr 26, 2009 | Universal Office Ink Tank Cartridge for...

1 Answer

Problem on a canon 3100


The Power Light Flashes Orange - Error Codes When an error occurs, the power light flashes orange. The number of orange flashes followed by a long green flash indicates the cause of the problem.
Two orange flashes: Out of paper, paper jam, or paper feed error
If no paper is loaded in the auto sheet feeder, or if the paper is not loaded correctly, set the paper correctly and press the Resume button on the printer to continue printing.
Three orange flashes: Paper jam
If paper has jammed in the printer, carefully remove the jam and press the Resume button to continue printing.
Four orange flashes: A tank inside the BJ cartridge (print head) is out of ink
Replace the empty BJ tank and press the Resume button to continue printing.
Five orange flashes: BJ cartridge is not installed properly
Remove and reseat the cartridge correctly. Make sure the orange protective cap and tape have been removed. Make sure the blue locking lever is locked down securely.
Six orange flashes: BJ cartridge (printhead) is not installed
Remove and reseat the cartridge correctly. Make sure the orange protective cap and tape have been removed. Make sure the blue locking lever is locked down securely.
Seven orange flashes: BJ cartridge (printhead) is defective
Remove the BJ cartridge and check that the contacts on the cartridge and cartridge holder are clean. Make sure the orange protective cap and tape have been removed and reinstall the cartridge. If the error occurs again after you resume operation, you may need to replace the BJ cartridge.
Eight orange flashes: Waste ink absorber almost full
The printer has a built-in waste ink absorber to hold the ink that is consumed during print head cleaning. This error indicates that the waste ink absorber is nearly full. Press the Resume button to skip the error so you can continue printing.
The POWER light flashes orange and green alternately: Service error
A service error means the printer requires the attention of a qualified technician. Count the number of flashes. (You may be asked this information.)

Feb 02, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Canon BJ 200 InkJet Printer Problem


Hello Ruth:

Somewhere on this website should be my comments on your problem but I can't find them, so here's a repeat. Sounds like the print head is clogged. With power on, press the Online and Print Mode buttons simultaneously until the lights to the left of the Online button blink. Normally, this takes a few seconds. This is the recommended cleaning procedure for this printer head. If no success, repeat this a few times. If no success, replace your ink cartridge with a Canon BC-02 black ink cartridge (if not already using this) and use the above cleaning procedure before trying to print. If unsuccessful, try a printer repairman.

Aug 29, 2008 | Canon BJ 200EX InkJet Printer

1 Answer

I have tried to print using my black ink cartridge and it will only print what is my email address.


Issue: Tinted printing / Colors are not exact
Solution: Resolving ink tank and cartridge issues BJC-6000

Printer attempts to print but no ink is on the paper Printer attempts to print but no ink is on the paper If the print quality is poor or no ink is appearing on the page, it may be because of the following problems:
  • The ink in the BJ tanks has run out.
  • The print head nozzles may be clogged
  • The protective cap or tape may have been reattached to the BJ cartridge
  • The BJ cartridge may need to be replaced
  • You may be using the wrong side of the media.
To check the level of ink in the BJ tanks
Open the printer's front cover and visually check the level of the ink in all the BJ tanks. If a BJ tank is low or has run out of ink, replace it. Failure to do so may shorten the life of your BJ Cartridge
To check the status of the print head by printing a Nozzle Check Pattern
  1. The Nozzle Check Pattern confirms whether the inks are being correctly ejected from the print head nozzles and whether the print head is correctly aligned.

  2. On your printer, press and hold the Resume button until you hear 2 beeps.

  3. When you release the button, the Nozzle Check Pattern will be printed. You can also print the Nozzle Check Pattern by clicking on the Test Print button in the Maintenance tab of the printer properties dialog box.

  4. After the Nozzle Check Pattern is printed, check the results. Look at the Nozzle Check Pattern for each BJ Ink tank. If any colors are missing or if any horizontal lines are broken or missing, perform the print head cleaning procedure.
To perform the print head cleaning procedure
  1. On your printer, press and hold the Resume button until you hear 1 beep.

  2. When you release the button, all print heads for all colors will be cleaned.

  3. You can also clean the print heads by clicking the left Print Head Cleaning button in the Maintenance tab of the printer properties dialog box.

  4. When the print head cleaning begins, the POWER light starts flashing. This will continue for about 30 seconds. Wait for the light to stop flashing before you resume normal operation.

  5. Perform the Nozzle Check Pattern test again.

  6. If the results are satisfactory, resume normal printing. If the results are not satisfactory, you may need to execute a print head deep cleaning.
To execute a print head deep cleaning
  1. Make sure paper is loaded in the sheet feeder and the printer is turned on.

  2. Display the printer properties dialog box and click the Maintenance tab.

  3. Click the right print head Cleaning button.

  4. When the print head cleaning begins, the POWER light starts flashing. Wait for the light to stop flashing before you resume normal operation.

  5. Perform the Nozzle Check Pattern test again.

  6. If the Nozzle Check Pattern is still unsatisfactory, you may need to execute a print head alignment.
To execute a print head alignment
In Windows, display the Maintenance tab of the printer properties dialog box.
  1. Click the right Test Print button.

  2. Follow the instructions on the screens to perform an automatic print head alignment.

  3. A confirmation screen will ask you if you want to perform automatic print head alignment. Read the screen and click OK. Another screen warns you not to start any other operation until the alignment is complete. Again, click OK.

  4. The BJ Printer Status Monitor displays the Printer Status. The driver will align the print heads then will print an alignment pattern.

  5. Perform the Nozzle Check Pattern test again.

  6. If the Nozzle Check Pattern is still unsatisfactory, you may need to replace the BJ cartridge.
To replace a BJ Tank in a BJ Cartridge
Leave the BJ cartridge in the printer when replacing a BJ tank. Make sure the printer's power is on. Make sure you insert the BJ tank in the correct slot.
  1. Open the front cover.

  2. The power light blinks while the cartridge holder is positioned to the center of the printer.

  3. Remove the empty BJ tank by pressing in on the release tab and then lifting the BJ tank up and out of its slot.

  4. Dispose of the tank properly, taking care to avoid spilling ink on your hands, floor, furniture, or clothing.

  5. Remove the new BJ tank from its package and pull the orange tape up and against the perforations to open the package film. Be careful not to remove the label from the tank. You will need it to match the tank to the correct slot in the BJ cartridge.

  6. Twist the orange protective cap to remove it. Do not attempt to reattach the protective cap; instead, discard it along with the protective tape.

  7. Insert the BJ tank by holding it at a slight angle, aligning it with the correct slot. Press down gently on the top of the tank until it locks into place.

  8. Lock the ink tank in place by pressing down on the circle mark on the top of the tank.
    Close the printer cover.

  9. The printer will automatically start cleaning the print heads. When the print heads are clean, the POWER light will stay on, indicating that the printer is ready for operation.

  10. Perform another test print to make sure the new ink tanks are performing correctly.
To remove the protective cap and tape from the BJ cartridge
  1. Open the printer's front cover.

  2. Unlock the BJ cartridge by raising the cartridge lock lever. Make sure you raise it all the way up.

  3. Remove the BJ cartridge by holding it by the circles on the left and right sides.

  4. Make sure that the orange protective cap has been removed.

  5. Make sure that the protective tape has also been removed.

  6. Replace the BJ cartridge and move the blue cartridge lock lever until it locks in place.
To check the media
Make sure that you are printing to the correct side of the media that you are using, and that the Media Type setting in the printer driver properties correctly reflects the type of paper you are using.
Be sure to read any instructions that come with your Canon specialty paper. These instructions provide important information regarding how to achieve the highest print quality with these papers.

May 30, 2008 | Canon BJC 6000 InkJet Printer

1 Answer

Canon BJC 3000


Printer attempts to print but no ink is on the paper Printer attempts to print but no ink is on the paper If the print quality is poor or no ink is appearing on the page, it may be because of the following problems:
  • The ink in the BJ tanks has run out.
  • The print head nozzles may be clogged.
  • The protective cap or tape may have been reattached to the BJ cartridge.
  • The BJ cartridge may need to be replaced.
  • You may be using the wrong side of the media.
To check the level of ink in the BJ tanks
Open the printer's front cover and visually check the level of the ink in all the BJ tanks. If a BJ tank is low or has run out of ink, replace it. Failure to do so may shorten the life of your BJ Cartridge
Check the status of the print heads by printing a Nozzle Check Pattern
The Nozzle Check Pattern confirms whether the inks are being correctly ejected from the print head nozzles and whether the print head is correctly aligned.
  1. On your printer, press and hold the Resume button until the printer light flashes two times.

  2. When you release the button, the Nozzle Check Pattern will be printed.

    You can also print the Nozzle Check Pattern by clicking on the Test Print button in the Maintenance tab of the printer properties dialog box.

  3. After the Nozzle Check Pattern is printed, check the results.

  4. Look at the Nozzle Check Pattern for each BJ cartridge. If any colors are missing or if any horizontal lines are broken or missing, perform the print head cleaning procedure.

    bjc3000_good_nozzle.jpg

  5. In the alignment head pattern, if the lines are not perfectly overlapped, align the print heads.
To perform the print head cleaning procedure
  1. On your printer, press and hold the Resume button until the printer light flashes one time.

  2. When you release the button, the print head will be cleaned.

    You can also clean the print head by clicking the left Print Head Cleaning button in the Maintenance tab of the printer properties dialog box.

  3. When the print head cleaning begins, the POWER light starts flashing. This will continue for about 30 seconds. Wait for the light to stop flashing before you resume normal operation.
  4. Perform the Nozzle Check Pattern test again.

  5. If the results are satisfactory, resume normal printing.

  6. If the results are not satisfactory, you may need to execute a print head deep cleaning.
To execute a print head deep cleaning
  1. Make sure paper is loaded in the sheet feeder and the printer is turned on.

  2. Display the printer properties dialog box and click the Maintenance tab.

  3. Click the right Print Head Cleaning button.

  4. When the print head cleaning begins, the POWER light starts flashing. Wait for the light to stop flashing before you resume normal operation.

  5. Perform the Nozzle Check Pattern test again.
If the Nozzle Check Pattern is still unsatisfactory, you may need to execute a print head alignment.
To execute a print head alignment
  1. In Windows, display the Maintenance tab of the printer properties dialog box.

  2. Click the right Test Print button.

  3. Follow the instructions on the screens to perform an automatic print head alignment.

  4. A confirmation screen will ask you if you want to perform automatic print head alignment. Read the screen and click OK.

  5. Another screen warns you not to start any other operation until the alignment is complete. Again, click OK.

  6. The BJ Printer Status Monitor displays the Printer Status. The driver will align the print heads then will print an alignment pattern.

  7. Perform the Nozzle Check Pattern test again.
If the Nozzle Check Pattern is still unsatisfactory, you may need to replace the BJ cartridge.
To replace a BJ Tank in a BJ Cartridge
Leave the BJ cartridge in the printer when replacing a BJ tank. Make sure the printer's power is on. Make sure you insert the BJ tank in the correct slot.
  1. Open the front cover.

  2. The power light blinks while the cartridge holder is positioned to the center of the printer.

  3. Remove the empty BJ tank by pressing in on the release tab and then lifting the BJ tank up and out of its slot.

  4. Dispose of the tank properly, taking care to avoid spilling ink on your hands, floor, furniture, or clothing.

  5. Remove the new BJ tank from its package and pull the orange tape up and against the perforations to open the package film.

  6. Be careful not to remove the label from the tank. You will need it to match the tank to the correct slot in the BJ cartridge.

  7. Twist the orange protective cap to remove it.

  8. Do not attempt to reattach the protective cap; instead, discard it along with the protective tape.

  9. Insert the BJ tank by holding it at a slight angle, aligning it with the correct slot. Press down gently on the top of the tank until it locks into place.

  10. Lock the ink tank in place by pressing down on the circle mark on the top of the tank.

  11. Close the printer cover.

  12. The printer will automatically start cleaning the print heads. When the print heads are clean, the POWER light will stay on, indicating that the printer is ready for operation.

  13. Perform another test print to make sure the new ink tanks are performing correctly.
To remove the protective cap and tape from the BJ cartridge
  1. Open the printer's front cover.

  2. Unlock the BJ cartridge by raising the cartridge lock lever. Make sure you raise it all the way up.

  3. Remove the BJ cartridge by holding it by the circles on the left and right sides.

  4. Make sure that the orange protective cap has been removed.

  5. Make sure that the protective tape has also been removed.

  6. Replace the BJ cartridge and move the blue cartridge lock lever until it locks in place.
To check the media:
  • Make sure that you are printing to the correct side of the media that you are using.
  • Be sure to read any instructions that come with your Canon specialty paper. These instructions provide important information regarding how to achieve the highest print quality with these papers.

Dec 17, 2007 | Canon BJC 3000 InkJet Printer

1 Answer

Printer ripair


The BJC 3000 will flash two different colored lights in a pattern to signal several different errors. From the documentation I have the two colors are orange and green, could those be the colors you see? At any rate here is the code: Two orange flashes: Out of paper, paper jam, or paper feed error. If no paper is loaded in the auto sheet feeder, or if the paper is not loaded correctly, set the paper correctly and press the Resume button on the printer to continue printing. Three orange flashes: Paper jam. If paper has jammed in the printer, carefully remove the jam and press the Resume button to continue printing. Four orange flashes: A tank inside the BJ cartridge (print head) is out of ink. Replace the empty BJ tank and press the Resume button to continue printing. Five orange flashes: BJ cartridge is not installed properly. Remove and reseat the cartridge correctly. Make sure the orange protective cap and tape have been removed. Make sure the blue locking lever is locked down securely. Six orange flashes: BJ cartridge (printhead) is not installed. Remove and reseat the cartridge correctly. Make sure the orange protective cap and tape have been removed. Make sure the blue locking lever is locked down securely. Seven orange flashes: BJ cartridge (printhead) is defective. Remove the BJ cartridge and check that the contacts on the cartridge and cartridge holder are clean. Make sure the orange protective cap and tape have been removed and reinstall the cartridge. If the error occurs again after you resume operation, you may need to replace the BJ cartridge. Eight orange flashes: Waste ink absorber almost full. The printer has a built-in waste ink absorber to hold the ink that is consumed during print head cleaning. This error indicates that the waste ink absorber is nearly full. Press the Resume button to skip the error so you can continue printing. The POWER light flashes orange and green alternately: Service error. A service error means the printer requires the attention of a qualified technician. If you have any more questions let us know otherwise please don't forget to rate this post.

Feb 20, 2007 | Canon BJC 3000 InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...