Question about Sony FD Trinitron WEGA KV-32HS500 32" TV

2 Answers

Stand by light flashing and tv remains off. - Sony FD Trinitron WEGA KV-32HS500 32" TV

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

There maybe a switch in the back of your tv.... behind the cover where you LCD lamp goes.... make sure you have put the cover back on correctly... there may be a blue switch and it is touchy.... try that and if that is not the problem .... it may be time to replace your tv lamp. :) It is not hard find your band on the internett and have the mail it to you....... it is easy to install. :)

Posted on Jan 31, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just got my Sony Wega working. It's a CRT model from 2001. Today suddenly quit working. It would turn on for five seconds and then shut off suddenly and the little stand-by light would blink four times. I took the back of the case off and dusted it outThen I pulled the circuit board in the middle to look for busted solder joints didn't find any but in the process I reseated a cable or two. Plugged it in and IT LIVES!!! I'll be out shopping around for a new LCD so if this quits again I'll be ready...

Posted on Feb 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg 42" tv not displaying screen image


The t-con board controls the picture. To test it shine a flash light on the screen abd see if you can see an image when the TV is on. If you do then the T-con board is OK. Look at the back light ballast board (sometimes is part of the power supply board) If you see no movement or a dim picture with the flash light, then the T-con board is gone. You can get parts here: TV Parts Universal TV Stands DLP Chips ShopJimmy

Aug 11, 2016 | LG Televison & Video

1 Answer

Why wont my Sony trinitron tv turn on but stand by light flashes?


That Flashing Standby Light Indicates A Defect In Your Low Voltage Or High Voltage Power Supplies...

May 25, 2014 | Sony FD Trinitron WEGA KV-36HS510 36" TV

1 Answer

Sony fd trinitron colour television kv 29ls60e


The power supply probably is failing.

Jan 10, 2014 | Televison & Video

1 Answer

Won't turn on.stand-by light flashes.timers are


my Sony trinitron kv-g21s2 TV not working . conned to the power blink in TV power indicator led

May 29, 2011 | Sony FD Trinitron WEGA KV-13FS100 13" TV

1 Answer

I have a sony wegs lcd tv with a seperate monitor and media centre. when I turn the media centre on the monitor lights up green on the stand by light and then afetr a couple of seconds the monitor switches...


The STANDBY light will flash if the television detects an issue within the television. Some of these issues can be resolved simply by following the steps below to reset the television.
If the issue is still unresolved after following all of the troubleshooting steps, service may be required. Please note the number of times the STANDBY light flashes and relay that information to the service center.
  1. Turn off the television. Unplug the television power cord from the electrical outlet.
  2. Let the television remain without power for 60 seconds.
  3. Plug the power cord back into the electrical outlet. NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
  4. Turn on the television.

Sep 21, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

32 in. Sony Trinitron stand by light keeps flashing


has a sony 41" REAR PROJECTION TV THE STAND BY LAMP IS BLINLING HAS RESET IT , NOTHING. HAS NO PICTURE NO SOUND

Jul 31, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

4 Answers

Tv tunrns on then goes to stand by flashes 4 times & repeats


turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Mar 13, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

1 Answer

Stand by light flashing


Call Sony Repair Division- the 6 flashes are a code. If you can get them to tell you what part or part fo the TV is affected, like Lamp, Speakers etc

Jan 31, 2009 | Sony KV-32V65 TV

1 Answer

No picture, no sound, stand by timer light flashing


Need a little information here...

1. The TV remains on, yet there is no picture and no sound? Or does the TV turn off altogether?
2. How many blinks does the standby light give? Are they continuous? Is it the same each time, or random?
3. Did anything else happen before this, or did it just happen one day?

Answer that and I'll try to help with what I know.

Jun 09, 2008 | Sony KV-32V40 32" TV

4 Answers

Sony kv32fs16 problem


The STANDBY light is flashing on the television and there is no picture or sound. Solution
sp.gif sp.gif The STANDBY light will flash if an issue is detected within the television. This can sometimes be resolved by simply following the steps below to reset the television.
  1. Turn off the television. IMPORTANT: For a projection television that uses an internal lamp, wait 5 minutes after turning off the television to allow the lamp to cool before continuing with the following steps.
  2. Unplug the television power cord from the electrical outlet.
  3. Let the television remain without power for 60 seconds.
  4. Plug the power cord back into the electrical outlet. NOTE: If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.
  5. Turn on the television.
If the issue is still unresolved after following all of the troubleshooting steps, service may be required. Please note the number of times the STANDBY light flashes and relay that information to the service center.

Nov 02, 2007 | Sony FD Trinitron WEGA KV-29LS35 29" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32HS500 32" TV Logo

932 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...