Question about Garmin iQue 3600 GPS Receiver

2 Answers

Sync problems with windows vista

I purchased a new computer over the weekend, (Vista Home Premium 64 bit) I have tried several times to install and Hot sync my IQue 3600 and it won’t find the device. I did try to run Palm Desk Top using XP SP2, Still no luck.

Any suggestions?

Posted by on

  • 1 more comment 
  • Huey3437 Apr 29, 2008

    Thanks for the info.



    The problem I am having is with the 64 bit version of Vista. After a great deal of voice mail and waiting, I finally spoke to a tech at Garmin who told me they do not have a plug-in for the 64 bit version of Vista. They put on an e-mail list and stated that they would e-mail the plug-in after they figure it out.



    Anyway, Thanks for the help!

  • cantellano Sep 27, 2008

    I have same problem, but on a HP Pavillion dv200 32 bits, with windows vista.

  • Harold784 Oct 25, 2008

    I have the same problem with hotsyncing my IQue 3600 to Vista 64 bit. I have the Palm Desktop and the HotSYnc manager set to run in XP compatability mode but when I try to sync my computer cannot load the driver for the IQue and the sync fails. Did anyone receive anything from Garmin sinc Huey posted his note?



    Harold

×

2 Answers

Two words: dual boot

Posted on Nov 04, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

I got a Vista computer in April and have problems also. You need a special program to install the maps. email Garmin and they will send you the link. An SD card reader/writer is MUCH faster than the sync.

I didn't have syncing problems until after I tried to install Documents to Go. I had to remove Doc to Go v6 because it was making my computer unstable. Doc to GO V10 works with Vista but requires Palm OS6. Garmin says that Palm OS6 can't be installed on the Garmin iQue because they added proprietary software to OS4. I believe my sync problems will disappear after I reload the Palm Software.

Posted on Apr 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows 7 64 bit does not recognise my Tomtom go 630 on Compaq 610 laptop - have latest "my tomtom", Video convertor for Tomtom & Tomtom home 2


Windows 7 is a new operating system, it does not support so many applications, softwares and files, Therefore, not being able to use your tom tom on your windows 7 should not come as a surprise to you as windows 7 does not support so many kind of softwares.
Try your tom tom video converter on another operating system and am very certain it will work there, except if there is a problem with the converter itself. Try it out on windows vista, windows XP etc.
Best regards

Dec 29, 2010 | Tomtom Go 630 GPS Receiver

2 Answers

Navman n40i smart st compatability problem with vista.


Hi,

Are you not able to run the activesync program despite the Vista warning? Did you try running it in compatibility mode? What happnes when you try to connect with sync center (what happens...any error messages)? Regarding the mobile device centre...did you check that McAffe and windows firewall is not blocking it from internet access?

Jan 26, 2008 | Navman NavPix N40i GPS Receiver

1 Answer

Recently received a Bushnell Neo for Christmas and having problems loading Bushnell Neo (provided) software to my computer. I have Windows Vista Home Premium and can't get past Quick Guide step 6,...


I've had the same problem today and found the following advice:

Solution:

1) Click on your Start Menu
2) Select Computer
3) Open Local Disk C.
4) Open Program Files
5) Open Bushnell
6) Open Neo Sync
7) Open Native
8) Delete IGolf.lck
9) Close out of everything, restart your PC, and attempt to launch the Sync Application again when your computer has started back up.

If the above fails to solve the problem, you need to install a new USB driver. Contact iGolf at 858-300-5513 858-300-5513 and they will email you the PL2303 Prolific Driver.

I downloaded the driver from
http://www.prolific.com.tw/eng/downloads.asp?ID=31
rather than send an email and now have it working on XP, Vista and windows 7 starter.

G.

Jan 09, 2010 | Bushnell GPS

1 Answer

IQue 3600 won't synch with new laptop with Vista


As far as I know there are no iQue USB drivers that work for 64-bit Windows. I have Windows 7 Ultimate 64-bit and my iQue is not recognized. No solution so far! I use my XP machine to synch.

Sep 29, 2009 | Garmin iQue 3600 GPS Receiver

1 Answer

Unable to update Tom Tom in windows vista keep getting error 1060 any solutions?


perform the following:
type the following three lines in to the Command window:


%SystemDrive%
cd "%ProgramFiles%\TomTom HOME 2"
xulrunner\HOMERuntime.exe -app xul\application.ini


To avoid having to type these lines every time you start HOME:

Right-click your desktop and choose New > Text Document - enter the commands provided above and then save the file as RunTTH.bat
copy this file to the TomTom HOME 2 folder in C:\Program Files (you will require Administrator rights to do this)
in the Start menu, right click on the TomTom HOME 2 icon.
select Properties
in Target, change "C:\Program Files\TomTom HOME 2\TomTomHOME.exe" to "C:\Program Files\TomTom HOME 2\RunTTH.bat”

The icon will change and HOME 2 should now run normally on your PC.
Please note that links like "Send to TomTom device" or "Add to TomTom" won't work because they rely on TomTomHOME.exe (which this workaround by-passes).
A full fix for this error will be implemented in a future HOME update.


NOTE: for 64 bit Vista change the second line of code to:

cd "%ProgramFiles(x86)%\TomTom HOME 2"

Jul 22, 2009 | Tomtom ONE 125 GPS Receiver

1 Answer

I have a new computer with Windows Vista and when I connected the Nextar M3-03 to it, It tells me the driver is out of date? I don't know that much about this so is there someting I can do or do I need to...


the solution might be as simple as going to Nextar's website and downloading a new driver that's compatible with vista. A problem I had when I purchased a new computer is that it had a 64bit vista operating system which rejected too many programs and drivers were not available. My solution was to install the 32 bit vista and it solved many, not all, of my problems. Good luck.

Jun 14, 2009 | Nextar M3 Car GPS Receiver

1 Answer

No drivers avalible for magellan Explorist 500 for Vista 64 bit


Windows 7 has a windows xp mode that seems to work. I have been using a VMWare image with windows xp for cranky hardware like my explorist xl.

Apr 05, 2009 | Magellan eXplorist 500 GPS Receiver

2 Answers

ICD-P520 driver for 64-bit operating system


the only way to use this on 64 bit systems is if you can suck your own pen1s. once this is accomplished, please send photos proving this act to sony and they will release the 64 bit drivers

Mar 12, 2009 | GPS

4 Answers

Sky caddie sync makes using more difficult


You must let the Windows Installation Wizard run and install the drivers. Then the computer will find and connect to the sky caddie.

Feb 11, 2009 | SkyGolf SkyCaddie Handheld GPS Unit

3 Answers

Downloading tomtom HOME 2


Hi rayncate.
64 bit vista is supported.
please let me know the exact error message you are getting.
There are a number of things that could be the issue.

Feb 18, 2008 | Tomtom ONE GPS Receiver

Not finding what you are looking for?
Garmin iQue 3600 GPS Receiver Logo

Related Topics:

620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...