Question about Xerox WorkCentre Pro 416 All-In-One Laser Printer

2 Answers

Xerox Workcentre Pro 416 P

Call for service

Posted by on

  • 1 more comment 
  • Anonymous Feb 26, 2008

    CA-1

  • Anonymous May 06, 2008

    We have not found a way to to print envelopes on the PRO 416. Can you help?

  • Anonymous Mar 20, 2014

    Service mode code

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

This would be the first thing to try..


  • Press the 0 and 8 keys simultaneously and switch on.
  • Input 400 using the numeric keys, and press the enter key.
  • Change displayed status counter to 0, and press the enter key.
  • Switch the machine off then on. Check that the machine returns to the normal standby mode. If the machine does not return to normal standby mode, perform the following checks.
  • Posted on Feb 18, 2008

    • fdgf fgh ddfh df

    Posted on Mar 10, 2008

    3 Suggested Answers

    • 3 Answers

    SOURCE: Xerox WC Pro 35 - Error 14-563

    this code means your scanner has failed to setup correctly. this could be a problem that you would need a qualified tech to service the copier. there is nothing that you can do after you power off and power on (popo) the copier. it could be voltage, pwb board, or a binding scanner assembly.

    Posted on Oct 07, 2008

    Whispis2
    • 192 Answers

    SOURCE: how to replace image drum in Xerox Workcentre Pro

    http://download.support.xerox.com/pub/docs/WCP_416Si/ocessuserdocs/any-os/en/wcp416_UG_en.pdf

    Go to page 8-14 for a step-by-step process.

    Please give me a 4 thumbs up if this has helped.

    Posted on Mar 31, 2011

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    My workcentre pro 416 is printing all copies as all black.


    It sounds to me like the High Voltage Power Supply, Biasing Ground, or Blanking Exposure Lamp may be a fault. You could also have a problem with the Digital Scanner unit. But, there is nothing that you can do yourself: EXCEPT: If the unit takes a Toner Cartridge that includes the drum, I would try replacing that first. Then if no joy, your going to have to call out the big guns. Good Luck!!

    Jun 13, 2012 | Xerox WorkCentre Pro 416 All-In-One Laser...

    1 Answer

    MY xerox work center pro copier 416 works well while photocopying,but i need a driver to operate from my PC


    Here is the xeros link to drivers from A-Z.  There is no workcentre pro 416 listed.  Check your model number and scroll down to workcentre.  Good luck.

    http://www.support.xerox.com/go/prodAtoZ.asp?Xlang=en_US

    Oct 13, 2010 | Computers & Internet

    1 Answer

    Need to reset replace drum message on Xerox Workcentre Pro 416


    You can replace the chip on the drum unit. Or the drum unir itself.
    Google a business called " the parts drop". They will have both the chip and or the drum cartridge. It is not resettable with a diagnostic code.

    Aug 19, 2010 | Xerox WorkCentre Pro 416DC Copier

    1 Answer

    My workcentre Pro 416 shows a jam, i have removed all jams that i could see. However it shows clear jam, and has 19 to dos on the screen, like open door, clean jam, close door, etc.. Is there a major reset...


    On this 416 machine, there is one place you cannot see a jam.
    Looking at the machine the right side doors need to be opened.
    The lower trays feed paper and need to go up the by pass feeder area.
    Just lower and behind the by-pass feeder the paper can get stuck, and you cannot see it.
    If you try to push a card stock up from the bottom, the paper can be pushed out.
    The other area is at the fuser. If the switch is worn it will not drop back into position. The tip of the switch wears and breaks off.
    It is rare a sensor goes out on this machine, besides the fuser sensor. Each paper feed head needs to be checked to see if the paper sensors are bad.
    Not seeing the machine, call Xerox for service repair if not resolved.

    Jul 15, 2009 | Xerox WorkCentre Pro 416 All-In-One Laser...

    1 Answer

    Is it possible to reset pro 416 out of this problem.


    Limited information provided.<br /> Pressing 8 start may give you a error code. Or a 8 plus stop button.<br /> If the machine has a C4 code, this may require machine software to be installed on the machine in order to correct problems. The scanner will not operate correctly even with a new scanner. The software needs to be installed by the service representative in order to align the correct software to main board, to correct laser heas assay.<br /> Good luck.<!-- from fixya rte -->

    Jun 18, 2009 | Xerox WorkCentre Pro 416 All-In-One Laser...

    2 Answers

    CA1 error code on my xerox workcentre 416


    Pretty much yes. That message is that the Polygon mirror, is not spinning. That is the motor/mirror assembly inside the laser unit. There is a slight chance it is just sticky, but that motor failure is not uncommon at all in that product.
    You can try going on google and searching a business called " the parts drop" and call, ask for Britt. There are 2 different lasr units for that machine, simply called a large and small laser unit.

    Aug 22, 2008 | Xerox WorkCentre Pro 416 All-In-One Laser...

    1 Answer

    Xerox 416


    No longer sorry, I left that job and have no documentation .
    You can go to a site called The Parts Drop. Just google the parts drop, call Britt, I would think he would have one.

    Jun 11, 2008 | Xerox WorkCentre PRO 128 Copier

    Not finding what you are looking for?
    Xerox WorkCentre Pro 416 All-In-One Laser Printer Logo

    Related Topics:

    935 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Xerox Office Equipment & Supplies Experts

    Whit
    Whit

    Level 1 Expert

    185 Answers

    iteminconline

    Level 2 Expert

    110 Answers

    CheckitRight
    CheckitRight

    Level 3 Expert

    1362 Answers

    Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...