Question about Office Equipment & Supplies

1 Answer

Konica 1015 parts

Hi,

Can you tell me where I can get an upper fuser roller and cleaner roller for a konica 1015 photocopier please?

Pete
e: psimpson@sawfishsoftware.com
m: 07795 622959

Posted by on

  • Petesimmo Feb 21, 2008

    I am ideally looking for a supplier in the Uk as I may need additional parts in the future and don't want to pay import duties or have to be delayed due to postage delays etc, thanks once again.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 168 Answers

Try this company. I have used them many of times.
I checked their website and they do carry both parts that you are looking for.
Here is their main website. http://precisionroller.com/
Then on the left side, click "Konica Minolta" then "1015" then click "Fuser Rollers"
and you should find them.
See if this direct link works:

http://precisionroller.com/catalog_display.php?fm=0&step=3&MfrID=297&ModelID=590&CategoryIDs%5B%5D=16

If I have helped you with your question, please remember to post a feedback and a rating.
Good luck.
Mac =)

Posted on Feb 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Photocopies on my Konica model 1112 have a one-inch-wide gray stripe along one edge. How can I correct this?


Sound like the cleaning blade needs to be replace or the fuser (Hot Part) upper roller needs to be replaced. Last is the drum


Try this site if they have the parts





Precision Roller Printer Toner Cartridges Parts and Supplies Office...

Apr 03, 2015 | Konica Office Equipment & Supplies

1 Answer

Sir, i have Konica 7145 machine. i have any 10 mints after F-35-3 error, or some time F-35-9 eroor


Hi the error codes you are getting f-35-9 and f-35-3 are common error codes for this machine
First do not reset the machine using 25 dipswitch 3-1 until you resolve what is wrong
The errors are related to the fuser unit assembly parts f-35-3 is the th1 thermistor f35-9 is also an issue with th1
I can tell you that the thermistors th1 and th2 have been changed a nuber of years ago you will need to replace them both also any other parts in the fuser like the web upper and lower clas adn rollers busings ect there is a fuser kit that you can purchase from konica it comes with all the parts to replace on the fuser unit
when replacing the parts on the fuser unit this must be done by a certified technician only if you are not trained to do this leave it alone
The best option is to replace the fuser unit assembly and have it installed by a certified engineer you will save a lot on labour
Once the new unit or refurb unit is done you will need to switch of machine hold down 2 and 5 at the same time switch on the machine and then go into dipswitch 3-1 and change from 1 to 0

Jan 20, 2011 | Konica Minolta Office Equipment & Supplies

1 Answer

Paper will stuck at the heater


HI i think you have a bad upper fuser roller thats why the paper rolled up with it or maybe there are finge clow are not good first of all just remove paper and just clean the upper fuser roller with fuser oil if yours fuser roller and finger clow are not damaged it will work fine enjoy
thanks

May 14, 2010 | Konica Minolta DiALTA Di200 Copier

1 Answer

What causes the cf 910 to give c0000 and c0042


Hi

Thanks for using FixYa. Error C0000 means Main Motor’s failure to turn and error C0042 means Fusing Cooling Fan Motor failure to turn.
These errors can be due to your fuser getting stuck. Sometimes the upper and lower rollers get stuck together, or a flat spot may develop on the lower roller. Check the fuser rollers, replace if faulty.

Please do rate the solution & revert for further assistance.

Thanks
Rylee

Jul 31, 2009 | Konica Minolta Office Equipment & Supplies

2 Answers

Frequent paper jams with my Konica 2223 photocopier


I wish I could help you, You need to call for service for your copier. An authorized dealer or Konica minolta branch service in your area. You might need a fuser unit that the upper separating claws disloge or broken, exit paper detect actuator is broken or disloged, or you need a new developer.

Feb 05, 2009 | Konica Minolta DiALTA Di200 Copier

1 Answer

Konica 1015


Add toner.
This will take care of this problem.
Please post a rating if I have helped you.
Any more questions, please post again.
Thanks

Sep 06, 2008 | Office Equipment & Supplies

2 Answers

Konica 1015


While holding 2 and 5 turn on machine.Press 4 then 7 then p.Press 0 then p.Turn off then on ,this will reset copier if it does not have a fuser problem which is f35.

Aug 01, 2008 | Ricoh 6513 Copier

2 Answers

Konica photocopier


My service info doesn't go back that far either, but this procedure should work to reset the code. However, I would make sure there's no toner build-up on the fuser thermistor or thermostat first, otherwise the code will reappear.

Here's the instructions on clearing the code:

Enter the 25 mode by holding down the 2 and 5 keys while turning on the copier.
Press the P key, then enter 47, then press P again.
Enter 0 and press the Print key.
Turn the machine off/on to exit the 25 mode.

If the code reappears, then theres a problem. If it doesn't, you're good to go!

Nov 11, 2007 | Konica Minolta DiALTA CF910 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98816 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...