Question about HP LaserJet 4250dtn Printer

1 Answer

Plugging in the HP Laserjet 4250dtn

The power cord for my printer got separated from the unit. I have the cord now, but I can't find where to plug it in to the *printer*. Unbelievable.

Please help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,089 Answers

Face the back of the printer.
Pull the duplexer back about 4 inches.. There on the left side is an opening with 3 small flat metal pieces sticking out. One end of the power cord has 3 flat pieces of metal sticking out. Use the other end to plug into that opening on the printer.
Push the duplexer back in. Now take the other end of the power cord, the male end, and find a thing on the wall in your room that this male part can fit into. It's usually about a foot of the floor. Let's call this an OUTLET. It may take you a couple of tries, but I have confidence that it shouldn't take you long to fit the end of the power cord into this thing that we call an outlet. Goodluck.

Posted on Feb 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp laserjet 4250 error 58.20


1 Turn the printer off and then on.
2 Reconnect the connector between the air-temperature sensor (the bar mounted across the main cooling fan
on the left side of the printer) and the power supply.
3 Replace the air-temperature sensor.
4 Replace the power-supply assembly.

Oct 16, 2012 | HP LaserJet 4250dtn Printer

1 Answer

I have HP Laserjet 4250dtn. There is no power comes in. I checked cable, on/off switch, and outlet fine. Is there any power reset or something to turn on printer ? Thanks.


Hi there, Your power supply/board got damaged. There is no way of reseting it as your machine isnt getting power. You will need to take it in for repairs.
regards

Jul 22, 2011 | HP LaserJet 4250dtn Printer

1 Answer

My hp laserjet 1020 plus printer blinking both. when a click print, the orange and green light started bliking instead of printing and no printing


Hi.

I will suggest you try reset the printer, follow the instruction below to reset your printer,

1. Without turning the unit off, unplug the power cord from the back of the product.
2. Press and hold # and 6 keys.
3. While holding those keys plug the power cord back in.
4. Wait until the screen goes blank before you release those keys.
5. Follow on printer screen instructions.

If that did not fix the problem, try this,
  1. Unplug the power cable from printer while the printer is powered on.
  2. Press and hold OK and HELP buttons while plugging in the power cord. Wait for the screen to go black or blank before releasing the keys.
  3. Just turn on the printer and configure your printer new.

May 08, 2011 | HP LaserJet 1020 Printer

1 Answer

Can't print on Network LaserJet Printer


If it worked before you updated the driver, go into the Device Manager and roll back the driver to the previous version. Sometimes new drivers haven't been fully tested, or they may contain bugs or may just be incompatible with an application that you happen to be running. If the old driver version works, stick with that.

May 28, 2010 | HP LaserJet 4250dtn Printer

1 Answer

Front panel not responding


Please perform the following steps:

1. Unplug the power cord from the unit.

2. Press and hold OK and Cancel buttons together while plugging in the power cord back to the unit.
3. Turn on the unit.

If the issue persists, please replace the unit. From my experience repairing coast HP OfficeJet 7310xi is almost equal to the coast of a new printer.

:) Dr Tony

Apr 19, 2010 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

The fax log will not load when prompted


Hi,

Please perform the resets given below and check if you are able to print the fax log. Please perform all the resets.

*** Partial Reset ***

* Turn on the unit
* Disconnect the power cord from the back of the unit
* Press # and 3 buttons simultaneously while plugging the power cord to the unit.


*** Semifull Reset ***

* Turn on the unit
* Disconnect the power cord from the back of the unit
* Press # and 6 buttons simultaneously while plugging the power cord to the unit.


*** NVM Reset ***

* Turn on the unit
* Disconnect the power cord from the back of the unit
* Press OK and Cancel buttons simultaneously while plugging the power cord to the unit.


Wish

Jul 31, 2009 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

Printing mechanism failed


The swing plate assembly needs to be replaced by an HP technician

Mar 04, 2009 | HP LaserJet 4250dtn Printer

1 Answer

I have an HP laserjet 3300...it has performed flawlessly for several years. It just stopped printing recently, and gives error message that there is no communication with the device. I unplugged the...


Hi,

Please follow the follwoing steps,

1) unplug the power cord at the both ends from the printer and wall outlet. connect to wall out let directly dont connect to printer.
2)Press and hold # and 6 while reconnecting the power cord to the product hold for 1 min after plugging the power cord, and then release both buttons, this should resolve the issue.

Regards,
raj_p5983

Jan 23, 2009 | HP LaserJet 3300 All-In-One Printer

1 Answer

Looking for a manual


Hi,

You can download your manual from

www.generalmanual.com/Printers/HP-LaserJet-4250dtn-Printer.htm

Hope my info solves your problem,
Thanx for using fixya.




Sep 30, 2008 | HP LaserJet 4250dtn Printer

Not finding what you are looking for?
HP LaserJet 4250dtn Printer Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...