Question about Routers

1 Answer

Route-map policy block the ICMP

We have three isp connected cisco 1841 router
we have configured route-map and policy
isp1 source ip use isp1 gateway
isp2 source ip use isp2 gateway
isp3 source ip use isp3 gateway

configuration as follows
ip access-list extended isp1
permit ip X.X.X.X 0.0.0.15 any
ip access-list extended isp2
permit ip X.X.X.X 0.0.0.15 any
ip access-list extended isp3
permit ip X.X.X.X 0.0.0.15 any
where x = isp ip subnet according isp ip
route-map test permit 10
match ip address isp1
set ip next-hop x.x.x.x (next hop of isp1 IP)
route-map test permit 20
match ip address isp2
set ip next-hop x.x.x.x (next hop of isp2 IP)
route-map test permit 30
match ip address isp3
set ip next-hop x.x.x.x (next hop of isp3 IP)
on interface
ip policy route-map test

after adding the above configuration am not able ping any of the public
on interface
ip policy route-map test

after adding the above configuration am not able ping any of the public IPs from same router and my isp are also telling they were not able to ping our IP
But am adding a default route on the router am able ping any IPs from the same router (0.0.0.0 0.0.0.0 isp1 gateway or isp2 or isp3 )
please give the solution for this i can't give default route on the router because my policy ISP1 want use ISP1 one likewise
sathya
!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 427 Answers

Honestly, I dont think anyone here will know how to handle this problem. Try to show this problem to a trained professional.

Posted on Mar 23, 2008

2 Suggested Answers

  • 10 Answers

SOURCE: Automatically ping and trace disabled after PBR

please add me on yahoo messenger or mail me , let me know when ur online , my id is samrat101@yahoo.com and we will be able to resolve it sooner,,, mails takes time.

Samrat

Posted on Mar 06, 2008

SOURCE: ICMP blocked automatically

return, cut this configuration, but put route the her isp´s.

You can ping after this?

Can´t ping you has other problem.

Good luck!

Posted on Mar 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the address ip for a router cisco 02706?


Connect a computer with the Router.
Open Command Prompt
Type: ipconfig
Lots of information will be displayed.
Scroll up if required and search for: Ethernet Adapter Local Area Connection:
In that category you will see one listed as Default Gateway.
And that is the IP Address of your Cisco Router.

Jun 08, 2014 | Cisco (1841) Router (cisco1841)

3 Answers

Cisco router 1841 connected to serial interface


Make sure you set up correctly the subnet mask.

Jul 29, 2008 | Cisco (1841) Router (cisco1841)

Tip

Cisco 1841 Router, Hot Sales Product Cisco 1800 Business Router


The Cisco 1841 router is designed for secure data connectivity and provides significant additional value compared to prior generations of Cisco 1700 Series routers by offering more than a fivefold performance increase and integrated hardware-based encryption enabled by an optional Cisco IOS Software security image.<br /><br />The <a href="http://www.router-switch.com/cisco1841-p-97.html">Cisco 1841</a> dramatically increase interface card slot performance and density over the Cisco 1700 Series while maintaining support for more than 30 existing WAN interface cards (WICs) and multiplex trunk cards (voice/WICs [VWICs]-for data only on the Cisco 1841 router).<br /><br />The <a href="http://www.router-switch.com/cisco1841-p-97.html">Cisco 1841 router</a> offers embedded hardware-based encryption enabled by an optional Cisco IOS Software security image; further enhancement of VPN performance with an optional VPN acceleration module; an intrusion prevention system (IPS) and firewall functions; interfaces for a wide range of connectivity requirements, including support for optional integrated switch ports; plus sufficient performance and slot density for future network expansion and advanced applications as well as an integrated real-time clock.<br /><br />Cisco 1841 router Product Details<br />Product Description Cisco 1841 router<br />Device Type Router<br />Form Factor External - modular - 1U<br />Dimensions (WxDxH) 34.3 cm x 27.4 cm x 4.75 cm<br />RAM 128 MB (installed) / 384 MB (max) - SDRAM<br />Flash Memory 32 MB (installed) / 128 MB (max)<br />Data Link Protocol Ethernet, Fast Ethernet<br />Network / Transport Protocol IPSec<br />Remote Management Protocol SNMP<br />Digital Signaling Protocol ADSL over ISDN<br />Features Cisco IOS IP Broadband , firewall protection, 128-bit encryption, hardware encryption, VPN support, VLAN support, Intrusion Prevention System (IPS), 256-bit encryption<br />Power AC 120/230 V ( 50/60 Hz )<br />System Requirements Microsoft Windows 98 Second Edition<br /><br />P.S. If you would like a new sealed Cisco 1841, the competitive price offered at RouterSwitch.com is US$586.00 per. Visit Cisco 1841 to see more...<br /><br />Notes: Router-switch.com is a World's Leading <a href="http://www.router-switch.com/">Cisco Supplier</a>, founded in 2002. It sells new, used and refurbished Cisco network equipment including Cisco routers 800/1800/1900/2800/2900/3800/3900 series, Cisco switches, Cisco Firewalls Security, Cisco IP Phones VOIP, etc.<br /><br />

on Jul 07, 2011 | Routers

1 Answer

Connect to cisco 1841


This is more of a business unit. It requires a serial port connection and a fair amount of CISCO networking engineering knowledge. It is command only. No GUI interface.

Jan 30, 2013 | Cisco (1841) Router (cisco1841)

1 Answer

Cisco 2851. I have no access to the router. No Ip Phone connectivity or internet access. Amber light is on the AL.


READ http://www.cisco.com/en/US/docs/routers/access/1800/1841/software/configuration/guide/b_creg.html

Apr 14, 2012 | Cisco 2851 Router

2 Answers

Client can not surf or ping specific web address - Cisco router


I am not sure but I believe the IP address is not correct. The trace goes to the following address:

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Tracing route to 200-100-1-5.dsl.telesp.net.br [200.100.1.5]

on my machine. This is only a service provider I believe and not an end website. Have you checked and verified the ip address with the contact organization? Just because you can run a trace route on an ip address does not make accessible.

The cisco could also be blocking the outbound connection at your end.

Hope this helps.

Feb 11, 2010 | Cisco 877 ADSL Security Router

1 Answer

Cicso router 1841 not connecting to the internet


When using Public IP addresses on one interface, usually facing your ISP, and using Private IP addresses (AKA RFC 1918) on another interface, usually facing your LAN, one needs to utilize network address translation (NAT) in order to connect LAN computing resources to the Internet.
Cisco has a fantastic article on how to perform the necessary procedures on their web site.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml

Sep 06, 2008 | Cisco (1841) Router (cisco1841)

1 Answer

Automatically ping and trace disabled after PBR


please add me on yahoo messenger or mail me , let me know when ur online , my id is samrat101@yahoo.com and we will be able to resolve it sooner,,, mails takes time.

Samrat

Feb 20, 2008 | Routers

1 Answer

How remove blocked icmp automatically


type a "no" before the command of blocking command
e.g:if you want to cancel ip address10.10.10.10
you must type no ip address 10.10.10.10

Feb 18, 2008 | Routers

1 Answer

ICMP blocked automatically


return, cut this configuration, but put route the her isp´s.

You can ping after this?

Can´t ping you has other problem.

Good luck!

Feb 18, 2008 | Routers

Not finding what you are looking for?
Routers Logo

Related Topics:

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...