Question about Whirlpool CAM2752RQ Coin Operated Commercial Washer

1 Answer

Just bought brand new commercial coin operated washing machine top load...everything is level tried washing a load and at the spin cycle the machine vibrates so bad it seems like it's going to take off. don't know what we did wrong.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

Maybe when you were moving it, one or more of the springs that keep the drum centered came off,unhook everything,drain it,tip it over face down on a piece of clean carpet, make sure everything is in order,all supports are in place, 2 people to tip it

Posted on Jan 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought brand new whirlpool top loading commercial washer and dryer with the coin sli


i think the answer is in the question....
you have bought a machine for multiple users (apartment. camping sites)
did you get a key for the coin box?
if so. just keep coins handy run them through the coin-op.

otherwise, you may need to employ an electrician to bypass it

May 16, 2014 | Washing Machines

1 Answer

Whirlpool commercial top load coin washing machine with only Luke warm water


i would take hoses off washer and check screens infill valves first.valve may have a thermister in it to control water temp this may be bad.may have to call a tech.

Dec 10, 2013 | Whirlpool CAM2752RQ Coin Operated...

1 Answer

My Frigidaire Commercial Series FCCW3000FS 27" Coin Operated Front-Load Washer will not agitate or spin clothes out. Please HELP!


You should check your serial number at this link:http://www.cpsc.gov/cpscpub/prerel/prhtml09/09292.html


There was a voluntary recall issued on your model number. The serial number will confirm if your machine is affected.


As to your problem, i would still suspect drain pump is struggling or inoperable. However if it seems to drain ok and your pump is still relatively quiet except for a nice mellow steady hum (there should be no rattling sound) then i'd take a look at the pressure switch. The pressure switch sends the signal to begin agitation (water level in tub is full) and spin (water in tub is drained.)

Jan 03, 2013 | Frigidaire Commercial Series FCCW3000FS...

1 Answer

Coin-operated Speed Queen washer: Model swtt21wn


speed queen double front load washer spinning without stop,please give some idea,thanks alot

Feb 21, 2011 | Speed Queen SWT921 Top Load Washer

2 Answers

Maytag coin-op top load wont spin, motor runs, belt burns.


it not a belt, there is a $20 plastic and rubber coupling between the motor and the transmission that has broken.  It needs replacing. 

Dec 25, 2008 | Maytag MAT12CS Top Load Washer

1 Answer

Brand new front load kenmore wobbles and moves across floor


Unless your front loader is set firmly on concrete and leveled to perfection, the force of a heavy wash load spinning in excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.

Dec 09, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Water supply


look on the control board. there's some DIP switches. these are set according to the number of coins needed to run the machine. the coin acceptor reads the number of coins going through it and advances the control board one increment for each "good" coin. objectionable coins are rejected.

Sep 06, 2007 | Maytag MAT12CS Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...