Question about Sony BDP-S360 DVD Player

1 Answer

LOOKING FOR HACK CODE AND REMOTE CONTROL MODEL NUMBER I SHOULD USE TO DO THIS

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 38 Answers

One for all rc 7652 works for this as do many others.
1. Press DVD
2. Hold the magic button until the DVD button flashes twice.
3. Press 000533

4. Hold the magic button until the DVD button flashes twice.
5. Press 994
6. Press Magic Key (don't hold)
7. Press 001891 (this sets key 1 – the DVD button flashes twice)

8. Hold the magic button until the DVD button flashes twice.
9. Press 994
10. Press Magic Key (don't hold)
11. Press 002552 (this sets key 2 – the DVD button flashes twice)

12. Hold the magic button until the DVD button flashes twice.
13. Press 994
14. Press Magic Key (don't hold)
15. Press 000953 (this sets key 3 – the DVD button flashes twice)

16. Hold the magic button until the DVD button flashes twice.
17. Press 994
18. Press Magic Key (don't hold)
19. Press 002214 (this sets key 4 – the DVD button flashes twice)

20. Hold the magic button until the DVD button flashes twice. .
21. Press 994
22. Press Magic Key (don't hold)
23. Press 000795 (this sets key 5 – the DVD button flashes twice)
Done - the remote is now programmed and ready to use

Quote:
1. Now to make your player region free use the Sony remote that came with the player to bring it out of standby and wait while HOME is displayed
2. Make sure there isn't a disc in the machine.
3. Now on the OneforAll remote press 1, 2, 3, 4, 5 (The blue 24p light on the player will start flashing)
4. Put the player back into standby with the Sony remote
5. That’s it, the next time you turn on the player it will be region free for DVD playback


I personally dropped the 00 that are marked red and it worked for me but it depends on model of one for all remote.

Posted on Feb 13, 2010

  • ben dunne Feb 13, 2010

    just to clarify,if hack doesn't work ,try to drop 00 from the number ,also remember it might take a couple of trys to get it right.originally i had them marked red but when i pasted they turned black.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the hack code for a bush cdvd90w2sw portable dvd player


Hi, I found this thread because I was looking for this same hack to play the DVD's my kids bought in the States on my UK sourced player. None of the above worked so I tried looking for hacks for other budget brands. As luck would have it the first one I came across for a Wal Mart portable DVD worked first time. Here it is...
•Turn on the power
•Open the lid
•Push the following number sequence on the remote control:
•9 7 3 5
•Use your arrow keys to select '0' for all regions
•Exit setup
Worked instantly.

Mar 03, 2012 | Televison & Video

1 Answer

Code


i am also looking for a code for this model number. if you know it could you please post it! thank you!

Jul 08, 2008 | Televison & Video

1 Answer

Region unlocker code for sony


go to www.videohelp.com put your model number in, hit search, scroll down. Look to right of screen-it will tell you if there is a region free hack- a hack is what you are looking for

Jun 27, 2008 | Televison & Video

1 Answer

I AM LOOKING FOR THE THREE DIGIT CODE FOR MY REMOTE TO ACTIVITATE A CLASSIC TV


I would need to know the make and model number of your remote control as well as the make and model number of the TV your trying to control.

Jun 19, 2008 | Televison & Video

1 Answer

I need a universal remote control code


I am looking for the White Westinghouse sk26h240s remote codes for a Comcast universal DVR Remote control. any ideas, please email me at renee.walton@comcast.net.

May 29, 2008 | Televison & Video

1 Answer

Wrong disc message displayed on screen for dvd-2026


I found these posts. I have only been able to get the fix to work once, though. :(
I found a "hack' to make mine work :)
1. Open the tray
2. Press "Setup": Menu Screen should appear
3. Press "8-8-8-8" ( if you changed the password, you might have to change it back to 8888 ) The region number should appear on upper right corner. No other notation. Typically just the numeral "1".
4. Use the right (->) or left (<-) arrow keys to change the region to 255 for all regions.
5. Use the up or down button to go to 3001 and 4000. I had to change 4000 to 4001 to get mine to work,
6. Press "Setup" to exit.
It was a big relief to find this hack, because I misplaced my receipt and thought I was simply out of $30.
Region code hack posted by jeff777, December 15 2004:
This works.

1) With remote control, power the DVD player on.
2) With remote control, open the DVD tray.
3) With remote control, select SETUP.
4) With remote control, press the VOLUME UP button, then the VOLUME DOWN button, then the VOLUME UP button again and finally the VOLUME DOWN button again.
5) You should now see a number 2 on your screen. If you do not, this hack will not work on your system or you have done something wrong. If you do see the number 2 on the screen, proceed to 6).
6) Use the LEFT and/or RIGHT arrow to select the number 255.
7) When you see the number 255, press the SELECT button.
8) Press the SETUP button again to end procedure.


Region code hack posted by RayH, May 18 2005:
Newer Sungale 2026 players are a bit easier to set up:

1. Open the tray

2. Press "Setup": Menu Screen should appear

3. Press "8-8-8-8" Region number should appear on upper right corner. No other notation. Typically just the numeral "1".

4. Use the right (->) or left (<-) arrow keys to change the region. "255" all region.

5. Press "Setup" to exit.

Tested Region 1, 2, 3, 4, and 5 PAL and NTSC disks. They all work just fine on an older US NTSC TV. It's a little bigger than the Cyberhome, but works much better. There is no jerking at chapters with either factory or homemade discs. Plays VCDs just fine.

Sniff around the internet. This machine is availabe as of 5-18-05 for about $29 plus shipping ($11). Arrived in two days.

Other hack posted by Hurricane, January 23 2006:
If you do the Setup>8888 thing you get a region code 1-6 & 255.
Well if you press up and down on the directional pad you also get 3001 and 4001 these can be changed to 3000 and 4000, I know that one of them is a Macrovision on/off flag but I don't know what the other is.
Region code hack posted by Streetmedik, March 25 2006:
I have the Sungale DVD2026 I have tested this with DVDs from various regions. It works.
1. Power on
2. open the tray.
3. ON THE REMOTE press the VOLUME up, down, up, down.
4. ON THE REMOTE press SETUP
5. ON THE REMOTE press the up and down arrows to go between the macrovision/region codes.
6. ON THE REMOTE press the left and right arroes to change the values.

Macrovision
3001 on
3000 off

Regions
1,2,3,4,5,6 = individual regions
255 = all regions

7. ON THE REMOTE press setup again and you are set.
You can change these values again and again If you just want to play around.

Mar 22, 2008 | Sungale DVD-2026 DVD Player

1 Answer

Hack code dor wharfedale l1911w-c


To make region free:
* Open the drawer
Press 0, 1, 2, 3, Play in sequence on the remote control
Play a region 1, 2 ,3 ,4 or any other region to see if the hack has worked!

The disc drawer can obscure the Infra-Red sensor when open, so ensure that you compensate for this when entereing the hack.

You can also return the player to Region 2 only mode using the following sequence:

* Open the drawer
* Press ZOOM
* Press RETURN
* Press POWER

Jan 04, 2008 | Televison & Video

2 Answers

Need a decrypt code?


You can use the same as that for the 7050 model. You NEED to use the remote control, press setup and then ffwd, frwd, fwd, rwd in sequence, it will appear a number. Press the right arrow key until it reaches 255 (it is fast, it jumps from 001 to 255), to get out, press set up again. You know can read all regions. In fact this is the same fix for the 7050 model.

Dec 16, 2007 | Coby TF-DVD7060 Portable DVD Player

Not finding what you are looking for?
Sony BDP-S360 DVD Player Logo

634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...