Question about Husqvarna Freesia 425

1 Answer

Settings for stippling freesia 425 - Husqvarna Freesia 425

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 201 Answers

Lower feed dogs. Turn on Needle Down. Presser foot pressure on Darning setting. Don't forget to lower the presser foot lever. That's about it! Since you are going to be the feed dogs, it doesn't really matter if you have a stitch length set or not, but do have width set for "0". The spring loaded darning/embroidery/quilting foot is the best for stippling, but try it with any open toe foot you may have. Do a few samples first using the threads you intend using on your project because the tensions might need tweaking. Try to get the result you like by adjusting only the top thread tension. If you really have to adjust the bobbin too, put a small mark on the bobbin case where the "normal" position of the screw is so you can return to that when you are done quilting.

Posted on Feb 02, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i make buttonhole on viking freesia 425


See pagew 24 and 25 in the User's Manual. If you need to download a manual, here is the link

Happy buttonholing

Apr 05, 2014 | Husqvarna Freesia 425

1 Answer

No manual. how do I change needle position for 1/4" seam on a Freesia 425

When set on a straight stitch using the stitch width button will change the needle position. If you have moved it far to one side you can use the mirror image to shift it to one of 25 positions.

Oct 13, 2013 | Husqvarna Freesia 425

2 Answers

Where are the oiling spots for a husqvarna freesia 415?

Like the Freesia 425, the 415 has permanent lubrication and sould never need oiling.

Aug 13, 2011 | Husqvarna Freesia 425

1 Answer

I need to replace the lightbulb in my viking freesia 425, but I don't know which one to get

Go to the Husqvarna shop and buy a bulb, they know which one... Might as well bring the machine with you, they will put the bulb in for free, (you will have to pay for the bulb of course...)

Feb 18, 2011 | Husqvarna Freesia 425

2 Answers

I own a freesia 425 & I bought a gathering foot. How do I use it? Where do I put the settings?

not knowing whether you have a Viking foot, I'm not sure how to advise you. Suggest you visit an authorized husqvarna viking dealer for assistance. They are usually eager to help. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page -

Good luck.

Oct 22, 2009 | Husqvarna Freesia 425

1 Answer

How do I get the outside case off the husqvarna sewing machine freesia 425 to get to the inside mechanisms?

I don't know about a Freesia specifically, but I saw my tech. literally rip off the front of my Designer 1 once - took me years to get over the trauma!! I think with most of these modern plastic machines, the various parts of the cover are clipped on. You just need to be brave, take a hold, and go for it. I would be sure to remove any "loose" bits and take a good hard look at which bit fits where first. Try jiggling the part you want to remove to see if there is more "give" in one direction than another. Also be prepared in case you accidentally break the lugs that hold the piece in place.

Oct 10, 2009 | Husqvarna Freesia 425

Not finding what you are looking for?
Sewing Machines Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides