Question about Gateway (6000598) Modem

1 Answer

I need to set up an email as follows: donna@behindtheparanormal.com I have found no domain site or any other place that will allow this, due to the @ in the address.

Posted by on

  • 1 more comment 
  • getumback Jan 31, 2010

    Thanks, this website is already owned by the person who asked for me to use the email I stated. I am a reporter for his radio show and it would be necessary for visitors to his site to get in contact with me through that address. Someone suggested I ask how he set up the site and do it that way, but he had someone else do it for him. I have contacted three other reporters with no response yet on how they accomplished getting theirs up and running. I thought there may be a specific site that would allow the @ to be added, but apparently not.

  • getumback Jan 31, 2010

    I am a reporter on a national CBS radio show. The person who has that show, has given me the email donna@behindtheparanormal.com to use so that people can reach me to ask questions. He did not set up his own site, but had someone do it. Each time I find a place to register this email address, it will not accept the character @ in the address, but inserts a - or doesn't use anything. The person who has the site and the show has already posted this address for me on his website. I have tried to contact the other reporters to find out if their addresses are up and running but have not been able to get a response. I am asking where I can get the @ to be accepted in my address.

  • abdul vahid lakkal May 11, 2010

    behindtheparanormal.com is your domain? if not you will have to approach them for a email id with desired username.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

First you need to buy the site behindtheparanormal.com then once you have the site, set self email options. Then type the new name.

My brother has cal@sitesbycal.com with no problems.

Posted on Jan 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I log into emails 0n my laptop


Hello Colleen

Go to the provider website and log in.


Bell email

Nov 06, 2017 | Computers & Internet

Tip

Editing DNS Records with GoDaddy For Your Kajabi Account


Note: GoDaddy is used as an example how to edit DNS Records because their user interface is easy to work with. As each provider has a different way of doing this, you may need to contact their support center specially if you are not comfortable editing DNS Records. Just show this article to them and they should be able to figure it out.<br /><br />Before anything else...<br /> <ul> <li>A Host Record is used to map the domain name to the IP address of the host that serves your website.</li> <li>CNAME Record is an alias of another address (www.example.com is an alias of example.kajabi.com).</li></ul>Let us continue...<br />For using a Custom Domain name with your Kajabi account, only two steps are needed for this to work.<br /> <ul> <li>Step 1: On your end (this is done at your domain provider/registrar). (3) A Host Records that points to our IP addresses (75.101.145.87, 75.101.163.44 and 174.129.212.2) and (1) CNAME Record for 'www' that points to your Kajabi site (example.kajabi.com) must be created. Details found here.</li> <li>Step 2: On our end configuration is automatic after adding your domain (www.example.com) in the Custom Domain field under the Project Settings tab.</li></ul><br /><utube src="oIUZY67iv-Q"><br /><br />Wait! I already have an existing site.<br /><br />The following guide below is provided for those who ONLY want to add their Kajabi site as a Sub-Domain to an existing site.<br /><br /> <ul> <li>Step 1: On your end (this is done at your domain provider/registrar). Create a CNAME Record (ex: 'members', 'portal', etc.) and point it to your Kajabi site (example.kajabi.com). Details found here.</li> <li>Step 2: On our end configuration is automatic after adding your domain (members.example.com) in the Custom Domain field under the Project Settings tab.</li></ul><br /><utube src="0V7G4UBq0yA">

on Mar 22, 2011 | Computers & Internet

1 Answer

What is DNS configuraion ?


DNS configuration is what you do to setup the name server for either a website or for your computer. Domain name servers find the IP (Internet Protocol). Everything that connects to the internt has an IP address. IP addresses are for location the machine. They are of the form xyz.xyz.xyz.xyz where xyz is a number between 0 and 255. A domain name would be something like fixya.com, which is easier for people to remember than the numbers. A Domain Name server translates the name to the numbers. Your ISP has one to do the the translation for you. For a web server (computer that hosts a website like fixya.com, the webhost has a Domain Name Server that allows the computer that runs the webserver to be found. Configuration in that case would be to allow the website to find other sites, and to be found by other sites. For your computer, it would be like this, if you are running windows xp: Change DNS Settings in Windows XP

For a server, here is a more complete description: An Introduction to DNS Terminology Components and Concepts DigitalOcean

May 26, 2017 | Computers & Internet

1 Answer

Configure A-records


Transfer your domain name to Godaddy. Then, once the transfer is complete (and Godaddy customer service will gladly walk you through this process), properly set the A records to Weebly. Done! :) Domain transfers may take up to 7 days.

Dec 31, 2011 | weebly.com Computers & Internet

2 Answers

Can i open a gmail account and still make people believe it is coming from my old email address


In a way, yes. Once you open up your gmail account, go to Mail Settings *under the gear in the upper-right corner*, then go to Accounts and Settings, and click the button "send mail as another account." It will go through a process where it sends an email to the other address and you need to verify it, then you can send emails and have them appear as the other address.
Just remember: when you compose the email you need to change the Send From field to reflect the address you desire the recipient to see.
Hope this helps!

Mar 18, 2011 | Computers & Internet

1 Answer

I keep getting the following when opening or sending mail: The message could not be sent. The setting for your outgoing email [SMTP] server might need to be configured. To find the server settings for...


Quick summary:
It appears that email address does not exist - which is why your email program was unable to send the message. There may be a small typographical error in the address - which you would need to correct in order to send the message successfully.

Background:
The error message you received says the "domain does not resolve". That means your outgoing server (which is used for sending messages) couldn't find the information about the recipient's address -- and more specifically, the "domain" of the recipient's address. (That's the portion of an email address following the "@" sign.)

The error message indicates the domain of the recipient's address is "quickfireprocuctions.com". But a quick check of domain registration records indicates there is no registered domain by that name. And if a domain is not registered, there can't be any websites or email addresses which use that domain name.

However, there is a properly registered domain "quickfireproductions.com" (with a "d" rather than a "c"). That seems much more likely - as the combination of recognizable words ("quick" "fire" "productions"). That domain is registered to owners in Florida, USA. See details at: http://whois.domaintools.com/quickfireproductions.com

Solution:
If that registered domain name sounds right, then you should revise the email address in your message to use the correct domain name (i.e., replacing the "c" with a "d").

Feb 23, 2011 | Microsoft Windows Live Mail

2 Answers

553 sorry, that domain isn't in my list of allowed rcpthosts


ok, this normally happens when the email receiver doesn't exist, however with my past experience with MS Outlook - it doesn't work unless it's set up correctly and specifically - and it's VERY difficult to do just right. I would suggest going with regular Hotmail and AOL accounts, they're free and there's no setup process apart from filling in the form to apply for the account.

Jul 21, 2009 | Microsoft Office Outlook 2007: Windows

1 Answer

553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)


This is not an outlook issue. This error is generated by the recipient's mail server basically saying that your domain/server isn't in their DNS list, so they don't trust your mail yet.

If you've only recently set up your email system make sure that the DNS records are all in place for your email domain - most notably your MX record (should also consider SPF record.)

If you've recently set up the DNS records, then try giving them some more time to populate on the internet.

Apr 27, 2009 | Microsoft Office Outlook 2007: Windows

11 Answers

Apple iPhone and Network Solutions web mail


So I had the same problem using a Network Solutions mail account and got it working. Here is what I did:

Name: Whatever you want
Address: first.last@domain.com (user specific) Must include the @domain
Description: same as above
INCOMING MAIL SERVER
User Name: first.last@domain.com (user specific) Must include the @domain
password: password
OUTGOING MAIL SERVER
Host name: smtp.domain.com
Username:no entry
password:no entry

At message that SSL failed select YES to continue without using SSL should get message twice (incoming & outgoing server tests)

Made no changes to Authentication (default-password) or Server port (default-25)

Came up and began to load mail instantly.Sent test mail and all is good.

Aug 24, 2008 | Apple iPhone Smartphone

1 Answer

Email


Which ever application you use (let me know specifically), you will almost always choose creating a POP account. You need from your service providers the following items.
  1. SMTP domain (ie. smtp.domain.com)
  2. POP domain (ie. pop.domain.com)
  3. Username to your email (ie. username@domain.com)
  4. Password for this account.
Your ISP will most likely have instructions about how to connect to them. If you go to their support and type in POP3 with Outlook or Outlook Express. You'll most likely get a hit.

In Outlook, go to Tools | Account Settings | Email to add the accounts.

Hope this helpa, if it does, please choose FixYa!

ThankYa!

Nov 08, 2007 | Microsoft Office Outlook 2003 for PC

Not finding what you are looking for?
Gateway (6000598) Modem Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Alun Cox

Level 3 Expert

2668 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...