When there is low voltage and the stablizer cannot power the copier, the error code 4H appears and copying cannot be done. what can be done about this? is there a code that can be used to correct this?
WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.
Error code F2 on sharp ar 5316
I have a copier Machine Sharp AR-5127, the error is F2-02, is there any code to correct this?
This should do it
NOTE: Some Status codes will not clear even though the problem has been fixed. Status codes that will not clear must be manually reset using the 'Fault Reset 14 Procedure'.
I have sharp AR-5316 error code is showing (d)
I have a copier Machine Sharp AR-5127, the error is F2-02, is there any code to correct this?
My Sharp AR6050 showed error code C1-00. How to reset it? Help me..
Thank alots
All you need to reset this error is in the service manual for this equipment:
http://www.tradebit.com/filedetail.php/185184978-sharp-ar-5316ar-5320-service-manual
Engr. KhanAqa Safi solution worked pretty good. What he dint include is, u av 2 b fast while doing it.
Its very urgent, when i start the sharp ar5316 machine . its does not start after few minuets also,in display in middle of top thr is round cirle symbol thats keep on blinking until it goes its does not start... but tis never goes after i restart several times also, after 1 hours if i switch on the machines its starts or sometimes it does not plz help me what is this error called,i think its look like termistor / heater symbol .. how to fix it. its a major problem i got .
Abnormal temparetur apply
# interput C interput =14= copy batton/ start batton
=15=
I have a copier Machine Sharp AR-5127, the error is F2-02, is there any code to correct this?
10,899 views
Usually answered in minutes!
copy coming with with some black background
discovered that any time the copier is powered, the 4H just keeps appearing.it is a sharp 5316.
yes the same problem with my copier also that it shows to use h4 but not copying.
when there is low voltage and the stablizer cannot power the copier, the error code 4H appears and copying cannot be done. what can be done about this? is there a code that can be used to correct this?
My Sharp copier AR 5316 has the Error code H4 .it was happened when the voltage was low.
I am Engineer Khanaqa Safi .My Copier Sharp AR 5316 has the error code H4. It was happened when th valtage was falling down and up.I tried to fix it by pressing C and Image quality button for 4 second but I couldent fix it .
Hello Dear friends!
I am Engineer KhanAqa Safi from Afghanistan.I have 10 Sharp AR5316 copiers .My Copier had the ERROR Code H4. I have Found how to solve this problem. I have the following recommendations for you :
1- Press Interrupt key once
2- Press # Key once
3- Again Press Interrupt Key once
4- Then press C (Clear ) Key once
5- Again press Interrupt key once
Machine goes to be like off(Don't off Your Machine)
6- Press 1 key and 4 (14)
7-Press Print key ( Green Key on the right)
Now your Machine is fixed
???¯? ?¬???§?² ?´?§?± ?£? ?§?± ??????? ???? ????? ???? ?§???¬???§?²
When the Sharp AR-5316 photocopier machine is switched on the error code 4H appears and the machine does not operate. I have tried the solution given somebody from Afghanistan and it does not work.
What can I do to get the machine to work. It is urgent
When Sharp AR-5316 is switched on error code 4H appears and the machine cannot be operate. Recommendation by Khanaqa posted on June 03,2008 has been tried bit it did not work. What can I do to get the machine to operate normally. It is very urgent
youpele from Port Harcourt Nigeria.
WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.
I had error 4H on Sharp AR-5316
I have the copier machine Sharp AR-5127 ,the error code U240 appears and coping cannot be done.What can be done about this ? is there a code that can be used to correct this?
pls you help me.
thank you very much.
Its actually H4.. hold and press copy button to see the full code error. Most common error in H4 is H4-00 or 01... Use AVR... and insert the trouble cancellation code...
If all the procedures mentioned by Engineer Khanaqa Safi did not work.. You must change the heater lamp, thermostat and the thermistor that you can see in the Fusing Unit...
×