Question about Televison & Video

1 Answer

My 19" Digital Labs TV cannot find any channels during cable AutoScan... If I plug in any other TV to the same cable it works fine.

Posted by on

  • pazer22 Jan 31, 2010

    Thanks, it is a DT496SA. In the manual under television system specs, it says: ATSC compliant 8VSB, QAM on cable, ATSC compliant 64 QAM/256QAM, and ATSC(8VSB terrestrial). Hope this helps.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

If you provide the model number of your Digital Labs TV, we can provide more accurate help for your tuning problem.

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Using hdtv antenna (not cable) but get no signal when scanning channels on my Insignia 19 inch tv


You may be using the wrong type of antenna. Apparently there is a lot of mystery and fiction in the advertisement of these antennas. Read this article and see if it doesn't clear up some issues for you.

Sep 09, 2014 | Televison & Video

1 Answer

My TV picture is not coming in and neither is all my channels.


Perhaps you have the TV set to receive analogue TV rather than digital (DBV). Consult the manual about receiving a digital signal.

Jan 21, 2014 | Sansui 19 in. LCD TV

1 Answer

Have a curtis tv , trying to run autoscan, it runs, but it doesn't locate any channels. I have a comcast converter box also. Not sure why autoscan isn't working. Or do I have to set up my comcast...


For the auto scan to detect there must be channels present on the CABLE that is connected to the RF input- TUNER INPUT- of the TV.
So check with your cable operator for the channels and you can connect. however if you are using a digital box then the channels are memorised on the box as only the output of the box is connect to the video/audiop inputs of the TV. if so select line in/video 1/2.

Oct 18, 2011 | Curtis 326A LCD TVDVD Combo

1 Answer

Digital labs 19 inch tv/dvd combo


Wish I knew the answer ... I have the same problem after switching to Dish Network (Satellite). It worked fine with Time Warner Cable. I'm suspecting the signal over Dish is analog (NTSC) which is not supported by this particular TV. I wish I still had the box and receipt!

Feb 01, 2010 | Televison & Video

1 Answer

Okay i have a digital labs 19" LCD HDTV/DVD and it works fine until you hook it up to an antenna cable, then it wont give channels when i auto scan. what should i do? buy a new cable or is it the tv


I have the same problem. Seemed to work fine with digital cable, but after switching to Dish Network, no luck. If I plug the AV cables (red/white/yellow) directly into the dish receiver, it works fine. The problem happens when I use it as a second TV connected via the RF cable wire. My only guess is that the dish receiver transmits the signal to the second TV via NTSC ... and the Digital Labs TV only supports ATSC and QAM. Hoping someone can confirm?

Jan 05, 2010 | eVision Televison & Video

4 Answers

Trying to set up Digital Labs 19''LCD TV/DVD combo and only gets limited cable channels (old tv on same cable gets lot more). Have completed auto scan and pick cable as reciever however only gets limited...


The remote control that came with my Digital Labs tv/dvd combo worked for about 2 seconds and never really worked correctly. Now, I'm trying to find a universal remote that will be compatible. Please help.

Dec 26, 2009 | Televison & Video

1 Answer

AV 35750 no images only sound with cable, images & sound with DVD


Make sure the cable is on when you autoscan. If the autoscan doesn't see it,manually inputing won't get you there. Make sure you have the correct band selected when you autoscan.

Dec 13, 2008 | JVC AV-27D302 27" TV

1 Answer

No signal on main tuner


can you connect comcast to another tv that should tell you if it's the tv tuner or cable company.

Nov 14, 2007 | Sony Grand WEGA KDF-42WE655 42" Rear...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Cindy Wells

Level 3 Expert

5100 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...