Question about Phones

2 Answers

ONe Tel 8500

Hi

Please can anyone tell me the maufacturers site for Ontel Dect phones. I need to change the pre recorded message on the answer unit. I misplaced the manual. Was hoping I could download it from their site. Don't really want to pay for one unless I really have to.

Many thanks

Posted by on

  • 2 more comments 
  • unamac128 Mar 18, 2008

    passed on a one.tel magma 200 phone to my mother and misplaced the manual when moving house. don't really want to pay and wondered can I download the manual?

  • Anonymous May 07, 2008

    I have same problem, got the phone, no manual, looked all over net.



    ANY help most welcome, not that I hold out much hope



    Goodluck

  • perrywinkle1 Jul 05, 2008

    Lost one tel magma 200 answer phone manual any solution.

  • soniaboyle1 Oct 29, 2008

    I also have lost the manual!!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a helpline in the front of the manual: 0845 226 7794 (office hours) local call rate.

Posted on Oct 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

No suggetions

Posted on Feb 18, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the message on my answering machine?


Which Uniden phone do you have? for some models, you access the Answering System menu from the base; on others, you need to be holding the handset. The generic steps are below.

On the appropriate part of the unit, make sure that the phone system is in standby (no active calls on any handset). Then press Menu. Use the arrow keys to find the line for Answering System. Press OK. Navigate to a line about Greeting and press OK. You should see (and select a line) for Recording message. You'll be prompted to ensure that you want to record a new message. If you are using the handset, hold the unit about 6" away from your head. After confirming that you wish to record a new message, speak your new message clearly. When you are done, press End. The unit will cut off the recording if your message was too long. Make sure to save the message. Then go back up in the Menu system and look for a line for "Play back Greeting". If the message isn't clear, start over.

I hope this helps. Please add a comment with the model number of the phone for specifics for your manual. Some DECT phone manuals are available here: http://www.uniden.com.au/australia/cs_operating_manuals_phones.asp .

Cindy Wells

Nov 21, 2015 | Uniden DECT 6.0 Cordless Phone

1 Answer

HI! How do I change the message on my phone?


You can record your own greeting message (max 2 mins & 30 secs). If you don't record a greeting mesage, a pre-recorded greeting message is used & asks the caller to leave a message. (Make sure your phone has the correct date, time, year, etc.)

To record a message:

1. Menu (OK) the "Answering Device" (OK), the "Record Greeting" (OK)

2. Then after the handset beeps, speak clearly about 20 cm (8 in) away from the mike.

3. To stop recording, press (OK)

4. (Off)

Mar 30, 2011 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

We have v tech phone after set answering system "A" sign on phone instead of "o" sign also not recording, please let me know how to solve this problem. Thanks


The "A" indicates announce mode, where the system plays an outgoing announcement but does not record incoming messages. You need to switch it to the record mode, where it will record incoming messages. Unfortunately, since you declined to specify the model of your VTech DECT 6.0 system, I cannot tell you how to do this. I can only direct you to enter the model number into the search box here to download a copy of the manual.

Dec 03, 2010 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

I lost manual. I need to know change message when will be out of town answering message.


Hi,
Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a
call: "Hello, no one is available to take your call. Please leave a message after the tone." You can record your own
personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 8 to start the recording. The system announces, "Record greeting." Begin recording after the
announcement.
When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recorded
greeting plays back for you.


Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 6. The system plays the current greeting.


To keep this greeting: Do nothing..


To switch to the other greeting: Press 6 while the system is playing the current greeting.
Each time you press 6, the system switches between the pre-recorded and the personal greeting. The last
greeting you hear is used as the current greeting.


Deleting Your Personal Greeting
You can delete your personal greeting from the base. You cannot delete the pre-recorded greeting.
Press /mute. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press 6. The system plays the current greeting. Switch to your personal greeting if necessary. (See the previous
section to switch the greeting.)
While the personal greeting is playing, press 4.
The system announces "Greeting has been deleted," and switches back to the pre-recorded greeting.

Dec 03, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

I recently bought a dect 6.0 digital answering system,and a friend put the first message on for me,then lost the manual,and now I can't figure out how to record a new message.Help!


Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: “Hello, no one is available to take your call. Please leave a message after the tone.”
You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.

  1. Press /mute. The system announces the number of new and old messages, then starts to play themessages unless it has no messages.
  2. Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that thesystem is in the command waiting mode.
  3. Press 8 to start the recording. The system announces, “Record greeting.” Begin recording after the announcement.
  4. When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recordedgreeting plays back for you.
Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can also switch back and forth between the pre-recorded greeting and your own greeting at any time.

  1. Press the Message icon (letter)/mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.
  2. Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.
  3. Press 6. The system plays the current greeting.

Jan 09, 2010 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Info to change message on telephone dect 6.0 telephone Uniden dect 6.0


Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: “Hello, no one is available to take your call. Please leave a message after the tone.”
You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.

  1. Press /mute. The system announces the number of new and old messages, then starts to play themessages unless it has no messages.
  2. Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that thesystem is in the command waiting mode.
  3. Press 8 to start the recording. The system announces, “Record greeting.” Begin recording after the announcement.
  4. When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recordedgreeting plays back for you.
Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can also switch back and forth between the pre-recorded greeting and your own greeting at any time.

  1. Press the /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.
  2. Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.
  3. Press 6. The system plays the current greeting.

Jan 06, 2010 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

The pre recorded message on the answering machine has been lost.


I read thru the manual. There is nothing bout recovery of factory messages. If you recorded your own, try deleting it. Or unplug the base from power and try a reset. This is from the manual. At the end, I gave you a link to the manual!

Using a pre-recorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a prerecorded
greeting message for callers
and asks them to leave messages. If the
message recording time (page 39) is set
to “Greeting only”, caller messages
are not recorded and the unit plays a
different pre-recorded greeting message
asking callers to call again.


http://service.us.panasonic.com/OPERMANPDF/KXTG9331.PDF

Nov 21, 2008 | Panasonic KX-TG9331T Cordless Phone

1 Answer

No user manual


To record a new OGM,

Press "menu" on the base unit, then "up" once to record OGM 1 or twice to record OGM 2.

Press "OK" The existing OGM will begin to play. Whilst this is playing press and hold "MEMO"

Record your message, speaking close to the base unit. Press "stop" (square) when finished.

If you decided you don't like your message then, repeat the process above but when it tells you to record your own message press "stop" (Square) and the default will be reset.

May 20, 2008 | Cable_and_wireless CWD4901 Cordless...

1 Answer

One.tel OT150


To record a new OGM,

Press "menu" on the base unit, then "up" once to record OGM 1 or twice to record OGM 2.

Press "OK" The existing OGM will begin to play. Whilst this is playing press and hold "MEMO"

Record your message, speaking close to the base unit. Press "stop" (square) when finished.

If you decided you don't like your message then, repeat the process above but when it tells you to record your own message press "stop" (Square) and the default will be reset.

May 19, 2008 | Cable_and_wireless CWD4901 Cordless...

1 Answer

Onetel OT8500


select menu then am operation, and choose to delete all, then choose record new. Now you have a new answering message/

Feb 14, 2008 | Phones

Not finding what you are looking for?
Phones Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96683 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...