Question about Sapphire ATI RADEON X1950 XTX 512MB Graphic Card

1 Answer

Problem is the video signal is lost. Computer runs fine, but can't get the picture. Is it overheated or is it shot?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 75 Answers

Check you directx  binding by typing dxdiag into run then take the test if you pass then it might be taking to much power to run the card . if you did not pass change the refreash rate or other setting till the dirver rewrites this may change the directx binding as the driver rewrites 

sounds like yo had the same Problems that I had with my 5200 geforce The install did not go well. what was happening was the direct x was binding to the old mother board graphics system and not the new card . to make it rebind just change the refresh rate in the nvidia icon in your task bar . disable the display adapter from device manager for the motherboard graphics .put the card in the slot change the monitor cord boot up check you direct x by typing in run dxdiag and test directx to be sure it is running with your card you can also see that from the about nvidia you must have the driver for the card installed to do all this.. hope I helped install the driver first then disable 

Posted on Apr 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lenovo a310 screen won't boot up and turn on


This could be a case of overheating.
First question, did the no signals sign appear out of the blue?
Check inside for melted components.
Clean your computer, remove all dust.

Check back with me.

Oct 22, 2012 | Lenovo Computers & Internet

1 Answer

Denon 1312 receiver composite video inputs do not work.


I'm having the same problem with my Wii output. The manual for the Denon AVR-1312 says that analog video signals (i.e. component/composite outputs from the Wii) are not converted to digital video signals (i.e. HDMI output from the rcvr). I'm running only HDMI to a projector, so the video signal is essentially lost. The fix appears to be to run an additional composite cable all the way to the projector. Sounds like your fix is the same. No Wii tonight! :(

Jul 07, 2012 | Denon AVR-1312 5.1-Ch A/V Home Theater w/...

1 Answer

I have sony Cyber-shot DSC-P10 digetal camera, which I lost my user manual, I tured on the video and do know how to turn it off. every time i want to take a picture it goes to video and takes some times to...


Hi,

You can download the complete instruction manual in PDF format by clicking this link.
  • You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/
Hope this solves your problem. Thanks for using FixYa.

May 25, 2010 | Sony Cyber-Shot DSC-P10 Digital Camera

1 Answer

How to restore deleted pictures i have taken 350 photos of marriage ceremony & manual mistake i have deleted all pictures i wants to retry the same please give us your guideline


Hello

Please download Disc Digger HERE. This is a free tool you can use that works very well and there is no installation required, just run the program once you downloaded it.

Once you have connected the memory card to the computer via either the camera or preferably with a usb card reader , run the program.

On the program , select the dig deep option for accidentaly deleted files or dig deeper for a formatted card. Then select the card you want to do the recovery on and run the program.

The data will be displayed and you can recover it from there. This will only work if the card has not been used since the pictures were lost. Save the files to a location on the computer hard drive and not back to the memory card as this will overwrite the other pictures that still needs to be recovered.

Some of the properties of the files may become lost in the recovery but the pictures should be fine.

Feel free to ask if you need more assistance.

Kind Regards
Andrea

Jul 08, 2009 | Sony Cyber-shot DSC-W30 Digital Camera

1 Answer

Infocus X1 picture freezes and dissapears and then comes on again


your display settings may be off, so change settings to factory reset and you may have to drop the resolution on your computer. you may also have a bad cable, so try a different cable.

Jul 03, 2009 | InFocus X1-RE Projector, Factory...

1 Answer

Sony cyber-shot camera problem w/hard drive


Hello

My apologies if this message finds you long after posting this problem , but I am currently working through a backlog of problems that never got answered and hopefully this info can still be of use if not now possibly in future.

Please download Disc Digger HERE. This is a free tool you can use that works very well and there is no installation required, just run the program once you downloaded it.

Once you have connected the memory card to the computer via either the camera or preferably with a usb card reader , run the program.

On the program , select the dig deep option for accidentaly deleted files or dig deeper for a formatted card. Then select the card you want to do the recovery on and run the program.

The data will be displayed and you can recover it from there. This will only work if the card has not been used since the pictures were lost. Save the files to a location on the computer hard drive and not back to the memory card as this will overwrite the other pictures that still needs to be recovered.

Some of the properties of the files may become lost in the recovery but the pictures should be fine.

Feel free to ask if you need more assistance.

Kind Regards
Andrea

Aug 09, 2008 | Sony Cyber-shot DSC-T100 Digital Camera

3 Answers

Records media but playback has no audio.


Are you absolutely sure that it is receiving an audio signal?
What input are you using? Try recording using alternate inputs.
Audio part of a VCR is normally way more reliable than the video.
The exception is on high-end stereo types where they record the extra audio signals using the video head cylinder in which case it can easily be lost.

Jan 24, 2008 | GE VG4054 VCR

1 Answer

Sony dsc-w50


If you have a recent operating system, there's a possibility it will recognise the camera if youjust plug it in. If it does recognise it, it will install the correct driver and run a wizard to help you get the pictures on your computer.

Apr 05, 2007 | Sony Cyber-shot DSC-W50 Digital Camera

Not finding what you are looking for?
Sapphire ATI RADEON X1950 XTX 512MB Graphic Card Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sapphire Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

dhnguyen

Level 2 Expert

281 Answers

John Hong
John Hong

Level 3 Expert

787 Answers

Are you a Sapphire Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...