Question about Computers & Internet

1 Answer

Iwill w100 usb drivers

Hello im trying to fix old pc for a friend in device manager there is no usb controllers listed at all nothing about usb at all where can i get controllers from please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Being a socket 370, perhaps you need to enable the USB ports in the CMOS/BIOS first before the motherboard can detect them and then the OS to request/install the necessary drivers.

You would of course need the CD that came with the motherboard to install the appropriate drives.

If they are enabled in the CMOS/BIOS but yet are not displayed in the Device Manager, you may have either an IRQ conflict or a hardware fault.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Feb 18, 2008

  • Louie  Role
    Louie Role Feb 22, 2008

    Glads to be of assistance and appreciate the rating.

  • dharc Sep 18, 2010

    Thank you for posting this information, i hope this will help me to fix old pc of my friend.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Usb ports not working?


click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers


if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem


check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts

hope it helps

Apr 17, 2012 | Dell Inspiron 5100 Laptop

1 Answer

In the device manager on the other devices list it has yellow question marks on the multimedia audio controller and network controller, pci simple communication controller, universial serial bus (usb)...


IF you can connect to the internet, you'll need to go to the Averatec support site and look up the driver downloads page for your laptop model and operating system. The link below should take you to a page (not Averatec's) that also has the drivers you need.

http://www.notebookera.com/notebook-drivers/s_1233_1.shtml

Download and install the Chipset drivers, as well as the drivers listed for Audio, Video, USB, and Network. It would be a good ideal to download ALL drivers listed for your laptop model and operating system and burn them to a CD for possible future use. Once those drivers are installed, you all of the yellow question marks should go away and your system should start working just fine.
disaksen72

Jan 12, 2011 | Averatec 3200 Notebook

2 Answers

Canoscan LiDE 100 on WinXP loaded drivers+software from disk


Have you tried going to the Devices Website for any CURRENT SOFTWARE UPDATES/DOWNLOADS?

Jul 05, 2010 | Dell Inspiron 1525 Laptop

1 Answer

No usb


If your USB ports are installed correctly and enabled in BIOS, you will see Universal Bus Controller list in the the Device Manager. Double-click your USB in the Device Manager and a dialog box will appear. Click on the driver tab and update the driver. To get to Device Manager right-click on My Computer>click on Hardware>Device Manager. If your computer has a built-in USB device and does not detect the device through the Device Manager, confirm that the USB is enabled in the computers BIOS and that the BIOS supprts USB devices.

Dec 29, 2008 | HP Compaq nc6000 Notebook

1 Answer

AlohaBob PC Relocator....USB Driver for Vista


Microsoft bought Eisenworld. Both the Eisenworld and Alohabob web sites have been shut down.
You will NOT be able to update it.
AlohaBob will be incorporated into the Vista update.

Try updating all your UBS drivers:
Go to your "Device Manager" (Right click on ‘My Computer', select 'Properties', click the 'Hardware' tab, click the 'Device Manager' button. Click the "Universal Serial Bus controllers").
If there is some kind of a yellow "Warning" icon superimposed on the 'UBS' icon there is your problem!
If no "Warning" icons then try...
One at a time...
Double click on each of the devices that have 'UBS' in the listings.
Click the "Properties" tab; look for any "Warning" icons
Uninstall the DRIVERS for THAT DEVICE only. See instructions below.
Click on the faulty driver and hit the remove button, follow the instructions given by the program.
Shutdown, restart, the device will automatically reinstall by the "Found New Hardware" program.
Go back in to Device Manager and Update all the Items listed under "Universal Serial Bus controllers"

Jul 17, 2008 | Eisenworld Alohabob PC Relocator Ultra...

1 Answer

Computer not recognizing any usb devices


Well, appears that your configuration can handle 4 GB of memory. I checked the Acer website for upgrades for your model, and nothing appears to jump out which could solve your problem. A few appear to be possibly helpful, but some are for XP, not Vista. Upgrading "launch manager" might be a good thing.

However, Belarc tells me that on my Acer 5630 i have listed under "Bus adapters" the following:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
And, under "other devices", i have a USB Root Hub (5x). Obviously, the two match. I go to device manager to check them out, finding them under 'univesal bus controllers", to see whether they are all working properly, and and they are. In addition, opening "system devices" reveals something called a "plug and play software device enumerator", and that checks out to be working fine as well. Check your equivalent out to see if you find a problem to fix. Hopefully you will. Let me know how things go.

Apr 21, 2008 | Acer Aspire 5610-4648 Notebook

1 Answer

Mouse not being recognized


Hello Narin,

Check the USB properties if there are some errors at Control Panel> System> Device Manager> USB device. Install the compliment CD driver for USB devices. Also try placing the mouse into other USB port(s). Update your OS as necessary for device patches and if there's a need to install driver for the said mouse please install then.. Hope thos helps.

Best regards,
Rosener Guyano

Feb 14, 2008 | HP Pavilion dv2000t 14.1" Notebook Laptop...

2 Answers

Drivers


Are you running windows XP??

And you have tried to download drivers from IWILL?? And they didnt work?

Is this a clean install of the operating system? If not xp, what windows is it?

Oct 28, 2007 | Computers & Internet

1 Answer

Connecting to PC


First, let's get the obvious/simple things out of the way, just to be thorough :) :
Power off the PC, leave ten seconds, power on again then try it.

Have you tried it with another USB cable
Have you tried it on another USB port on the PC (if you've been using a front port, try a back one & vice-versa - they're often controlled by different chips).

Assuming none of those work, the most likely cause is a corrupted USB driver. To fix this:
* Make sure the camera's USB cable is not plugged into the PC.
* Uninstall the Olympus software (Camedia Master) if you have installed it.

Now delete the C5060 device as follows:

* Go to the Control Panel. Double click on System. Click on the Hardware tab and then click "Device manager".

* Go to the View menu and click "Show hidden devices".

*Scroll to the bottom of the device list and expand the USB list. You will see some USB Mass storage devices.

* Go through the list: double click on one, wait for its properties sheet to open and look at the Location. It will have something like:

Location 0 (C5060Z ).

Hit "Esc" to close the property sheet. If it was the right one, delete it (select it with the mouse and hit Delete). If it was the wrong one, proceed to the next one.

* Close Device manager.

* Reinstall the Olympus software if you are using it.

* Plug the camera's USB cable into the PC as usual. If all goes well, you'll get the "Found new hardware" message and it will proceed to reinstall the driver, following which all should be well.

Oct 14, 2007 | Olympus Camedia C-5050 Zoom Digital Camera

2 Answers

USB Insanity


If none of your USB ports work on your PC, then it could be possible that your USB chip set controller driver got corrupted. I would 1st check the device manager at the very end of the list indicating "universal serial bus controllers", check to see if their is any exclamatiom marks or question marks indicating a possible driver problem. At your own risk you can try refreshing your USB chip set, I would highly recommend to check to see if your keyboard and mouse is a Non-USB interface if they are then refreshing the usb ports will disable your keyboard\mouse no navigation avail. If this is the case then I would try a different route by reinstalling your USB drivers. On the other hand if they are P/S2 interface's then you can refresh the USB controller; Go into the device manager at the end of the list "universal serial bus controller" click on the (+) symbol and locate any listing that includes "universal host controller" you may have more then one, once you locate them right click and delete them. Once deleted restart PC and windows should refresh the USB controllers. Please note this only applies to Windows 2000 & XP.

Aug 23, 2007 | Microsoft Windows XP Home Edition

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

101516 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...