Question about Scanners
Ok im sure you wont get back to me till tomorrow because its late but i guess i need to verify my server name? dns server or something like that. where do i go to verify that i think thats what i did wrong was accidently change the server name and i really need to fix it asap
Im not sure why you want your dns server number but here you go. go to start, run, type in cmd and this opens the command prompt. from there type in ipconfig /all make sure after you type in ipconfig to hit your spacebar once then forward slash. you will see your dns # let me know exactly what you need. hope it works for you.
Posted on Feb 18, 2008
Are you referring to the one for emailing? Go to your service providor(ISP) website, and look for email settings in the help/support screen. Each one is unique, so I can't really tell you which it is.
Posted on Feb 18, 2008
Tips for a great answer:
Optimize and improve image quality
Change print density
You can change the print density setting by from the product Properties dialog box.
1. Windows XP, Windows Server 2008, and Windows Server 2003 (using the default Start menu
view): Click Start, and then click Printers and Faxes.
Windows XP, Windows Server 2008, and Windows Server 2003 (using the Classic Start menu
view): Click Start, and then click Printers.
Windows Vista: Click Start, click Control Panel, and then in the category for Hardware and
Sound click Printer.
Windows 7: Click Start, and then click Devices and Printers.
2. In the list of printers, right-click the name of this product, and then click the Properties menu item
to open the product Properties dialog box.
3. Click the Device settings tab, and then move the Print Density slider to the desired setting.
4. Click the Apply button to accept the setting, and then click the OK button to close the dialog box.
Manage and configure printer drivers
The product uses the paper-type setting to establish many internal settings that affect print quality.
Always use the correct paper-type setting in the printer driver. Also make sure that the other settings
on the Paper/Quality tab in the printer driver are correct.
Aug 27, 2014 | HP LaserJet Pro M1212nf MFP -...
Feb 04, 2014 | Elite Scanners
You need a few things to be able to connect your Intermec CK31 to a server and all the settings are within the "Intermec Settings" within the terminals control panel.
First thing to start with is the wireless profile, set this up to match your current access point wireless settings, SSID, Encryption Type, Key etc. You can also set your wireless IP. Once this is done there will be an icon in the taskbar that shows connection and signal strength. Depending on the firmware revision of the terminal you should be able to use the tools to ping a device on your network, if the server responds to a ping then you should be able to get to your server when you try and connect.
I hope this helps.
If you need any more help then please do not hesitate to contact us:-
email@example.com or TEL +44(0)1202 620955
Jun 19, 2012 | Intermec CK31C,COLOR TE2000,5KY LINR
Jan 25, 2011 | Canon ScanFront 220P Flatbed Scanner
Aug 27, 2010 | Card Scanning Solutions ScanShell 800N...
Apr 27, 2009 | Canon CanoScan LIDE50 Flatbed Scanner
May 29, 2008 | Scanners
Feb 18, 2008 | Memorex MEM48U Flatbed Scanner
Feb 18, 2008 | Scanners
Dec 08, 2016 | Canon m11055 - Dr2050c High Speed Scanner
83 people viewed this question
Usually answered in minutes!